Bedding control on landslides: A methodological approach for computer-aided mapping analysis

Litho-structural control on the spatial and temporal evolution of landslides is one of the major typical aspects on slopes constituted of structurally complex sequences. Mainly focused on instabilities of the earth flow type, a semi-quantitative analysis has been developed with the purpose of identifying and characterizing litho-structural control exerted by bedding on slopes and its effects on landsliding. In quantitative terms, a technique for azimuth data interpolation, Non-continuous Azimuth Distribution Methodological Approach (NADIA), is presented by means of a GIS software application. In addition, processed by NADIA, two indexes have been determined: (i) Δ, aimed at defining the relationship between the orientation of geological bedding planes and slope aspect, and (ii) C, which recognizes localized slope sectors in which the stony component of structurally complex formations is abundant and therefore operates an evolutive control of landslide masses. Furthermore, some Litho-Structural Models (LSMs) of slopes are proposed aiming at characterizing recurrent forms of structural control in the source, channel and deposition areas of gravitational movements. In order to elaborate evolutive models controlling landslide scenarios, LSMs were qualitatively related and compared with Δ and C; quantitative indexes. The methodological procedure has been applied to a lithostructurally complex area of Southern Italy where data about azimuth measurements and landslide mapping were known. It was found that the proposed methodology enables the recognition of typical control conditions on landslides in relation to the LSMs. Different control patterns on landslide shape and on style and distribution of the activity resulted for each LSM. This provides the possibility for first-order identification to be made of the spatial evolution of landslide bodies. © Author(s) 2011

A hybrid model for mapping simplified seismic response via a GIS-metamodel approach

In earthquake-prone areas, site seismic response due to lithostratigraphic sequence plays a key role in seismic hazard assessment. A hybrid model, consisting of GIS and metamodel (model of model) procedures, was introduced aimed at estimating the 1-D spatial seismic site response in accordance with spatial variability of sediment parameters. Inputs and outputs are provided and processed by means of an appropriate GIS model, named GIS Cubic Model (GCM). This consists of a block-layered parametric structure aimed at resolving a predicted metamodel by means of pixel to pixel vertical computing. The metamodel, opportunely calibrated, is able to emulate the classic shape of the spectral acceleration response in relation to the main physical parameters that characterize the spectrum itself. Therefore, via the GCM structure and the metamodel, the hybrid model provides maps of normalized acceleration response spectra. The hybrid model was applied and tested on the built-up area of the San Giorgio del Sannio village, located in a high-risk seismic zone of southern Italy. Efficiency tests showed a good correspondence between the spectral values resulting from the proposed approach and the 1-D physical computational models. Supported by lithology and geophysical data and corresponding accurate interpretation regarding modelling, the hybrid model can be an efficient tool in assessing urban planning seismic hazard/risk. © Author(s) 2014

Multiscale Composites: Assessment of a Feasible Manufacturing Process

A very interesting field of research on advanced composite materials is the possibility to integrate new functionalities and specific improvements acting on the matrix of the composite by means of a nanocharged resin. In this way, the composite becomes a so-called "multiscale composite" in which the different phases change from nano to macro scale. For example, the incorporation of nanoscale conductive fillers with intrinsically high electrical conductivity could allow a tailoring of this property for the final material. The properties of carbon nanotubes (CNT) make them an effective candidate as fillers in polymer composite systems to obtain ultralight structural materials with advanced electrical and thermal characteristics. Nevertheless, several problems are related to the distribution in the matrix and to the processability of the systems filled with CNT. Existing liquid molding processes such as resin transfer molding (RTM) and vacuum-assisted resin transfer molding (VARTM) can be adapted to produce carbon fiber reinforced polymer (CFRP) impregnated with CNT nanofilled resins. Unfortunately, the loading of more than 0.3-0.5% of CNT can lead to high resin viscosities that are unacceptable for such kind of processes. In addition to the viscosity issues that are related to the high CNT content, a filtration effect of the nanofillers caused by the fibrous medium may also lead to inadequate final component quality. This work describes the development of an effective manufacturing process of a fiber-reinforced multiscale composite panel, with a tetra-functional epoxy matrix loaded with carbon nanotubes to increase its electrical properties and with GPOSS to increase its resistance to fire. A first approach has been attempted with a traditional liquid infusion process. As already anticipated, this technique has shown considerable difficulties related both to the low level of impregnation achieved, due to the high viscosity of the resin, and to the filtration effects of the dispersed nanocharges. To overcome these problems, an opportunely modified process based on a sort of film infusion has been proposed. This modification has given an acceptable result in terms of impregnation and morphological arrangement of CNTs in nanofilled CFRP. Finally, the developed infiltration technique has been tested for the manufacture of a carbon fiber-reinforced panel with a more complex shape

Optimization of graphene-based materials outperforming host epoxy matrices

The degree of graphite exfoliation and edge-carboxylated layers can be controlled and balanced to design lightweight materials characterized by both low electrical percolation thresholds (EPT) and improved mechanical properties. So far, this challenging task has been undoubtedly very hard to achieve. The results presented in this paper highlight the effect of exfoliation degree and the role of edge-carboxylated graphite layers to give self-assembled structures embedded in the polymeric matrix. Graphene layers inside the matrix may serve as building blocks of complex systems that could outperform the host matrix. Improvements in electrical percolation and mechanical performance have been obtained by a synergic effect due to finely balancing the degree of exfoliation and the chemistry of graphene edges which favors the interfacial interaction between polymer and carbon layers. In particular, for epoxy-based resins including two partially exfoliated graphite samples, differing essentially in the content of carboxylated groups, the percolation threshold reduces from 3 wt% down to 0.3 wt%, as the carboxylated group content increases up to 10 wt%. Edge-carboxylated nanosheets also increase the nanofiller/epoxy matrix interaction, determining a relevant reinforcement in the elastic modulus

Remote sensing monitoring of the Pietrafitta earth flows in Southern Italy. An integrated approach based on multi-sensor data

Earth flows are complex gravitational events characterised by a heterogeneous displacement pattern in terms of scale, style, and orientation. As a result, their monitoring, for both knowledge and emergency purposes, represents a relevant challenge in the field of engineering geology. This paper aims to assess the capabilities, peculiarities, and limitations of different remote sensing monitoring techniques through their application to the Pietrafitta earth flow (Southern Italy). The research compared and combined data collected during the main landslide reactivations by different ground-based remote sensors such as Robotic Total Station (R-TS), Terrestrial Synthetic Aperture Radar Interferometry (T-InSAR), and Terrestrial Laser Scanner (TLS), with data being derived by satellite-based Digital Image Correlation (DIC) analysis. The comparison between R-TS and T-InSAR measurements showed that, despite their different spatial and temporal resolutions, the observed deformation trends remain approximately coherent. On the other hand, DIC analysis was able to detect a kinematic process, such as the expansion of the landslide channel, which was not detected by the other techniques used. The results suggest that, when faced with complex events, the use of a single monitoring technique may not be enough to fully observe and understand the processes taking place. Therefore, the limitations of each different technique alone can be solved by a multi-sensor monitoring approach

Kinematic Segmentation and Velocity in Earth Flows: A Consequence of Complex Basal-slip Surfaces

Abstract We investigated relations between geomorphic structures, movement velocity, and basal-slip surface geometry within individual kinematic domains of two large earth flows in the Apennine Mountains of southern Italy: the "Montaguto" earth flow and the "Mount Pizzuto" earth flow. Our analyses indicated that the earth flows are composed of distinct kinematic zones characterized by specific deformational patterns and longitudinal velocity profiles. Variations in velocity within individual kinematic zones is controlled by the geometry of the basal-slip surface, and, in particular by local variations in slope angle. Slip-surface geometry and slope also seem to control the density of extensional structures in driving earth-flow elements

Smart coatings of epoxy based CNTs designed to meet practical expectations in aeronautics

A smart coating exhibiting self-diagnostic capability is designed to meet industrial requirements in aeronautics. The coating made of epoxy-based carbon nanotubes (CNTs) has been applied on industrial Carbon Fiber Reinforced Plastics (CFRPs) currently employed in aeronautics. The correlations between mechanical strain and electrical properties of coated CFRPs highlights the feasibility in manufacturing CFRPs having integrated high sensitivity in providing an effective real-time structural health monitoring. The reliability of the developed CFRPs, in the normal operational temperature range of aircrafts, opens new perspectives in the field of self-responsive structures in aeronautics. Self-responsive panels can simultaneously act as sensor and structural element

Morphological, rheological and electrical properties of composites filled with carbon nanotubes functionalized with 1-pyrenebutyric acid

Non-covalent functionalization of Multi Wall Carbon Nanotubes (MWCNTs) could provide a solution for preserving their electronic structure facilitating the nanocomposite process preparation. Functionalization of MWCNTs by π-stacking interaction between nanofiller and a pyrene derivative has been explored. The rheological properties of filled epoxy resins highlight very interesting benefits from this kind of functionalization. Besides its peculiar capability for preventing agglomeration in the nanofiller dispersion step, it also efficiently contributes to a decrease in the viscosity of the nanocomposites; hence contrasting one of the most relevant drawback related to the manufacturing processes of the nanocomposites at MWCNTs loading rates beyond the Electrical Percolation Threshold (EPT). Because no damage of MWCNTs occurs, sp2 hybridization of carbon atoms is preserved together with the π-electron delocalization typical of polynuclear aromatic rings. Consequently, no deterioration in the electrical properties are detected; the measured EPT values are typical of nanocomposites containing embedded unfunctionalized MWCNTs (lower than 0.28 wt%), whereas for the electrical conductivity beyond the EPT, an enhancement is observed

TOWARDS BENZ[A]ANTHRACENE XENOME ELUCIDATION IN PLANTS AND GREEN MICROALGAE

In only 12,000 years the Homo sapiens sapiens has completely modified the face of the Earth. The human pressure on the atmosphere, water and soil has been accelerate from the industrial revolution from which chemicals and energy have been released in the environment. Therefore, chemical environmental pollution and world climate changes are two of the main concerns that modern human must deal. Among chemicals released in the ecosystem the polycyclic aromatic hydrocarbon (PAHs) have gathered significant environment concerns for their detrimental biological effects, toxicity, mutagenicity, and carcinogenicity. The distribution of PAHs in the three environment compartments is related to the number of fused benzene rings. Two or three benzene rings have been occurring in the atmosphere whereas 5 or more rings are largely bounds in the soil particles. Intermediate, 4-rings, such as benz(a)anthracene (B[a]A) are partitioned between air and soil. The molecular mechanism involved to degrade PAHs into less toxic compounds by bacteria and fungi in soil has been elucidated. On the other hands, the metabolism of PAHs in plant and microalgae remain unknown. Signalling, transport, biotransformation of PAHs to less toxic molecules and compartmentalization are the main steps involved for their detoxification in photosynthetic cell. The expression of genes involved in these xenobiotics detoxification steps constitutes the xenome. The final aim of this work is to determine the B[a]A xenome in plants of tomato and in microalgae. So far, we have assessed the ability of tomato plants to grow in vitro and take up the B[a]A. Tomato seedlings were transplanted to MS medium added with 50 and 100 μg g -1 B[a]A and cultivated for 30 days. The detection of B[a]A in shoots infer a translocation from roots to shoots. However, the content of the PAH in shoots was much lower than in the root apparatus indicating that B[a]A was translocated very little from roots to shoots. The identification of microalgae species B[a]A capable of growing in presence of has been performed on 14 different species belonging to the genera Chlorella, Scenedesmus, Chlamydomonas, Ankistrodesmus, Botriococcus and Selenastrum, with six different concentrations of B[a]A. Four microalgae species showed a growth inhibition percentage less than 50% in a medium containing 43.8 μM B[a]A. The capacity to degrade B[a]A and affect the photosynthetic pigment content has been evaluated in the identified microalgae grown for 21 days in the medium containing B[a]A. The four microalgae strains reached 90% B[a]A degradation. Then, in silico analysis was carried out on C. reinhardtii proteome to identify potential laccase involved in the degradation process. Finally, the response of intracellular and extracellular activity in the absence and presence of the B[a]A was analysed by ABTS and 2,6-DMP assays