Bedding control on landslides: A methodological approach for computer-aided mapping analysis

Litho-structural control on the spatial and temporal evolution of landslides is one of the major typical aspects on slopes constituted of structurally complex sequences. Mainly focused on instabilities of the earth flow type, a semi-quantitative analysis has been developed with the purpose of identifying and characterizing litho-structural control exerted by bedding on slopes and its effects on landsliding. In quantitative terms, a technique for azimuth data interpolation, Non-continuous Azimuth Distribution Methodological Approach (NADIA), is presented by means of a GIS software application. In addition, processed by NADIA, two indexes have been determined: (i) Δ, aimed at defining the relationship between the orientation of geological bedding planes and slope aspect, and (ii) C, which recognizes localized slope sectors in which the stony component of structurally complex formations is abundant and therefore operates an evolutive control of landslide masses. Furthermore, some Litho-Structural Models (LSMs) of slopes are proposed aiming at characterizing recurrent forms of structural control in the source, channel and deposition areas of gravitational movements. In order to elaborate evolutive models controlling landslide scenarios, LSMs were qualitatively related and compared with Δ and C; quantitative indexes. The methodological procedure has been applied to a lithostructurally complex area of Southern Italy where data about azimuth measurements and landslide mapping were known. It was found that the proposed methodology enables the recognition of typical control conditions on landslides in relation to the LSMs. Different control patterns on landslide shape and on style and distribution of the activity resulted for each LSM. This provides the possibility for first-order identification to be made of the spatial evolution of landslide bodies. © Author(s) 2011

A hybrid model for mapping simplified seismic response via a GIS-metamodel approach

In earthquake-prone areas, site seismic response due to lithostratigraphic sequence plays a key role in seismic hazard assessment. A hybrid model, consisting of GIS and metamodel (model of model) procedures, was introduced aimed at estimating the 1-D spatial seismic site response in accordance with spatial variability of sediment parameters. Inputs and outputs are provided and processed by means of an appropriate GIS model, named GIS Cubic Model (GCM). This consists of a block-layered parametric structure aimed at resolving a predicted metamodel by means of pixel to pixel vertical computing. The metamodel, opportunely calibrated, is able to emulate the classic shape of the spectral acceleration response in relation to the main physical parameters that characterize the spectrum itself. Therefore, via the GCM structure and the metamodel, the hybrid model provides maps of normalized acceleration response spectra. The hybrid model was applied and tested on the built-up area of the San Giorgio del Sannio village, located in a high-risk seismic zone of southern Italy. Efficiency tests showed a good correspondence between the spectral values resulting from the proposed approach and the 1-D physical computational models. Supported by lithology and geophysical data and corresponding accurate interpretation regarding modelling, the hybrid model can be an efficient tool in assessing urban planning seismic hazard/risk. © Author(s) 2014

Multiscale Composites: Assessment of a Feasible Manufacturing Process

A very interesting field of research on advanced composite materials is the possibility to integrate new functionalities and specific improvements acting on the matrix of the composite by means of a nanocharged resin. In this way, the composite becomes a so-called "multiscale composite" in which the different phases change from nano to macro scale. For example, the incorporation of nanoscale conductive fillers with intrinsically high electrical conductivity could allow a tailoring of this property for the final material. The properties of carbon nanotubes (CNT) make them an effective candidate as fillers in polymer composite systems to obtain ultralight structural materials with advanced electrical and thermal characteristics. Nevertheless, several problems are related to the distribution in the matrix and to the processability of the systems filled with CNT. Existing liquid molding processes such as resin transfer molding (RTM) and vacuum-assisted resin transfer molding (VARTM) can be adapted to produce carbon fiber reinforced polymer (CFRP) impregnated with CNT nanofilled resins. Unfortunately, the loading of more than 0.3-0.5% of CNT can lead to high resin viscosities that are unacceptable for such kind of processes. In addition to the viscosity issues that are related to the high CNT content, a filtration effect of the nanofillers caused by the fibrous medium may also lead to inadequate final component quality. This work describes the development of an effective manufacturing process of a fiber-reinforced multiscale composite panel, with a tetra-functional epoxy matrix loaded with carbon nanotubes to increase its electrical properties and with GPOSS to increase its resistance to fire. A first approach has been attempted with a traditional liquid infusion process. As already anticipated, this technique has shown considerable difficulties related both to the low level of impregnation achieved, due to the high viscosity of the resin, and to the filtration effects of the dispersed nanocharges. To overcome these problems, an opportunely modified process based on a sort of film infusion has been proposed. This modification has given an acceptable result in terms of impregnation and morphological arrangement of CNTs in nanofilled CFRP. Finally, the developed infiltration technique has been tested for the manufacture of a carbon fiber-reinforced panel with a more complex shape

Verifica e prevenzione del rischio biologico in suinicoltura : Una proposta operativa = Biological risk assessment in pig farming : an operative proposal

Il rischio biologico zoonosico in suinicoltura assume sostanzialmente una conigurazione occupazionale. Per valutarlo in modo eficace \ue8 necessario conoscere le caratteristiche epidemiologiche dei patogeni coinvolti, ma \ue8 indispensabile correlare queste informazioni con l\u2019attivit\ue0 degli operatori, considerando il rischio espositivo nel tempo e nello spazio, il loro stato di salute, i possibili danni e l\u2019eficacia delle misure preventive applicate. A questo scopo \ue8 stata progettata e realizzata di una lista di riscontro (check-list), da applicare in allevamento e in macello per valutare entit\ue0 e cause del rischio espositivo, anche rispetto alle soluzioni di controllo e prevenzione gi\ue0 in essere. Un approccio corretto ed esaustivo del problema deve prevedere la collaborazione dei veterinari con i medici del lavoro, in una prospettiva One Health.The zoonotic biological risk in pig farming has a noticeably occupational coniguration. The knowledge of the epidemiology of the involved pathogens is required. The correlation of this information with the operators\u2019 activity is also essential, considering their exposure risk, state of health and the effectiveness of the preventive applied measures. For this purpose a checklist exploitable in farming and slaughter facilities to evaluate the extent of occupational biological risk has been designed and assembled. Prevention and risk control require the collaboration of veterinarians with occupational physicians, in a One Health perspective

Kinematic Segmentation and Velocity in Earth Flows: A Consequence of Complex Basal-slip Surfaces

Abstract We investigated relations between geomorphic structures, movement velocity, and basal-slip surface geometry within individual kinematic domains of two large earth flows in the Apennine Mountains of southern Italy: the "Montaguto" earth flow and the "Mount Pizzuto" earth flow. Our analyses indicated that the earth flows are composed of distinct kinematic zones characterized by specific deformational patterns and longitudinal velocity profiles. Variations in velocity within individual kinematic zones is controlled by the geometry of the basal-slip surface, and, in particular by local variations in slope angle. Slip-surface geometry and slope also seem to control the density of extensional structures in driving earth-flow elements

Remote sensing monitoring of the Pietrafitta earth flows in Southern Italy. An integrated approach based on multi-sensor data

Earth flows are complex gravitational events characterised by a heterogeneous displacement pattern in terms of scale, style, and orientation. As a result, their monitoring, for both knowledge and emergency purposes, represents a relevant challenge in the field of engineering geology. This paper aims to assess the capabilities, peculiarities, and limitations of different remote sensing monitoring techniques through their application to the Pietrafitta earth flow (Southern Italy). The research compared and combined data collected during the main landslide reactivations by different ground-based remote sensors such as Robotic Total Station (R-TS), Terrestrial Synthetic Aperture Radar Interferometry (T-InSAR), and Terrestrial Laser Scanner (TLS), with data being derived by satellite-based Digital Image Correlation (DIC) analysis. The comparison between R-TS and T-InSAR measurements showed that, despite their different spatial and temporal resolutions, the observed deformation trends remain approximately coherent. On the other hand, DIC analysis was able to detect a kinematic process, such as the expansion of the landslide channel, which was not detected by the other techniques used. The results suggest that, when faced with complex events, the use of a single monitoring technique may not be enough to fully observe and understand the processes taking place. Therefore, the limitations of each different technique alone can be solved by a multi-sensor monitoring approach

Mycobacterium tuberculosis Surgical Site Infection after Cardiac Surgery in the COVID-19 Era: A Case Report

Infection of surgical wounds with acid-fast bacilli, including tubercle bacilli, is rare, and is poorly described in the literature. We present the case of a 74-year-old male who developed a sternal wound infection after cardiac surgery due to Mycobacterium tuberculosis complex, diagnosed post-mortem. SARS-CoV-2 infection contributed to worsened clinical conditions and surgical site infection. A high degree of suspicion to avoid unnecessary treatments and progression to severe disease with dismal prognosis is necessary in these types of infections