667 research outputs found

    Using the Rosat Catalogue to find Counterparts for Unidentified Objects in the 1st Fermi/LAT Catalogue

    Full text link
    There are a total of 1451 gamma-ray emitting objects in the Fermi Large Area Telescope First Source Catalogue. The point source location accuracy of typically a few arcminutes has allowed the counterparts for many of these sources to be found at other wavelengths, but even so there are 630 which are described as having no plausible counterpart at 80% confidence. In order to help identify the unknown objects, we have cross-correlated the positions of these sources with the Rosat All Sky Survey Bright Source Catalogue. In this way, for Fermi sources which have a possible counterpart in soft X-rays, we can use the, much smaller, Rosat error box to search for identifications. We find a strong correlation between the two samples and calculate that there are about 60 sources with a Rosat counterpart. Using the Rosat error boxes we provide tentative associations for half of them, demonstrate that the majority of these are either blazars or blazar candidates and give evidence that most belong to the BL Lac class. Given that they are X-ray selected and most are high synchrotron peaked objects, which indicates the presence of high energy electrons, these sources are also good candidates for TeV emission, and therefore good probes of the extragalactic background light.Comment: 9 pages, 1 figure; Accepted for publication in MNRA

    Rapid Fabrication of Flat Plate Cavity Phosphor Thermography Test Models for Shuttle Return-to-Flight Aero-Heating

    Get PDF
    Methods, materials and equipment are documented for fabricating flat plate test models at NASA Langley Research Center for Shuttle return-to-flight aeroheating experiments simulating open and closed cavity interactions in Langley s hypersonic 20-Inch Mach 6 air wind tunnel. Approximately 96 silica ceramic flat plate cavity phosphor thermography test models have been fabricated using these methods. On one model, an additional slot is machined through the back of the plate and into the cavity and vented into an evacuated plenum chamber to simulate a further opening in the cavity. After sintering ceramic to 2150 F, and mounting support hardware, a ceramic-based two-color thermographic phosphor coating is applied for global temperature and heat transfer measurements, with fiducial markings for image registration

    Radio Observations of the Supernova Remnant Candidate G312.5-3.0

    Full text link
    The radio images from the Parkes-MIT-NRAO (PMN) Southern Sky Survey at 4850 MHz have revealed a number of previously unknown radio sources. One such source, G312.5-3.0 (PMN J1421-6415), has been observed using the multi-frequency capabilities of the Australia Telescope Compact Array (ATCA) at frequencies of 1380 MHz and 2378 MHz. Further observations of the source were made using the Molonglo Observatory Synthesis Telescope (MOST) at a frequency of 843 MHz. The source has an angular size of 18 arcmin and has a distinct shell structure. We present the reduced multi-frequency observations of this source and provide a brief argument for its possible identification as a supernova remnant.Comment: 5 pages, 5 figures, Accepted for publication in MNRA

    Transport of NOX emissions from sugarcane fertilisation into the Great Barrier Reef Lagoon

    Get PDF
    The Great Barrier Reef World Heritage Area contains highly sensitive ecosystems that are threatened by the effects of anthropogenic activity including eutrophication. The nearby sugarcane plantations of tropical north Queensland are fertilised annually and there has been ongoing concern about the magnitude of the loss of applied nitrogen to the environment. Previous studies have considered the potential of rainwater run-off to deposit reactive nitrogen species into rivers and ultimately into the Great Barrier Reef Lagoon, but have neglected the possibility of transport via the atmosphere. This paper reports the results of a modelling study commissioned by Australia’s National Heritage Trust aimed at assessing whether or not atmospheric deposition of reactive nitrogen from Queensland’s sugarcane plantations posed a potential threat to the Great Barrier Reef Lagoon. Atmospheric dispersion modelling was undertaken using The Air Pollution Model, developed by Australia’s Commonwealth Scientific and Industrial Research Organisation. Despite the predominance of onshore southeasterly winds, the dispersion model results indicate that 9% of the time during the sugarcane fertilization season (in the modeled years 2001–2006) the meteorological conditions resulted in emissions from the coastal regions of north Queensland being transported out over the ocean around the Great Barrier Reef. The results suggest that there may be a greater efficiency for transport out over the reef during October than for November and December. For the 2 months that exhibited the greatest potential for transport of coastal pollution to the Great Barrier Reef, the modeled deposition of nitrogen oxides (NOX) into the Great Barrier Reef lagoon was less than 1% of the total emissions from the sugarcane plantations, but was not zero. Our model has a simple chemical scheme that does not cover the full chemistry of all reactive nitrogen compounds and so the results are only indicative of the potential levels of deposition. Nevertheless, our study shows that small amounts of NOX that originate from sugarcane fertilization may be transported and dry deposited into the Great Barrier Reef lagoon. Other pathways not included in the modeling scheme may provide a more efficient transport mechanism. Whilst modern practices for the application of fertilizer to sugarcane plantations have drastically reduced emissions, the potential efficiency of transport of pollutants via the atmosphere may be of concern for other more highly polluting agricultural industries

    Trace Gas Emissions from Biomass Burning inferred from Aerosol Optical Depth

    Get PDF
    We have observed strong correlations between simultaneous and co-located measurements of aerosol optical depth and column amounts of carbon monoxide, hydrogen cyanide, formaldehyde and ammonia in bushfire smoke plumes over SE Australia during the Austral summers of 2001/2002 and 2002/2003. We show how satellite-derived aerosol optical depth maps may be used in conjunction with these correlations to determine the total amounts of these gases present in a fire-affected region. This provides the basis of a method for estimating total emissions of trace gases from biomass burning episodes using visible radiances measured by satellite

    Living with a left ventricular assist device:Capturing recipients experiences using group concept mapping software

    Get PDF
    BackgroundLeft ventricular assist device (LVAD) implantation significantly impacts on a recipient's symptoms and quality of life. Capturing their experiences and post implant journey is an important part of clinical practice, research and device design evolution. Patient reported outcome measures (PROMs) are a useful tool for capturing that experience. However, patient reported outcome measures need to reflect recipients' experiences. Discussions with a patient partner group found that none of the frequently used cardiology PROMs captured their unique experiences.AimsTo capture the experiences and important issues for LVAD recipients. Develop a conceptual map of domains and items that should be reflected in patient reported outcomes.MethodsGroup concept mapping (GCM) web-based software was used to remotely capture and structure recipients' experiences across a wide geographical area. GCM is a semi-quantitative mixed method consisting of 3 stages: item generation, item sorting and rating (importance, relevance and frequency). Patient partners were involved in all aspects of the study design and development.Results18 LVAD recipients consented to take part. 101 statements were generated and multi-dimensional scaling, and hierarchical cluster analysis identified 9 clusters. Cluster themes included: Activities, Partner/family support, Travel, Mental wellbeing, Equipment and clothing, Physical and cognitive limitations, LVAD Restrictions, LVAD Challenges and positive impact of the LVAD (LVAD Positives). LVAD Positives were scored highest across all the rating variables, e.g., frequency (2.85), relevance (2.44) and importance (2.21). Other domains rated high for importance included physical and cognitive limitations (2.19), LVAD restrictions (2.11), Partner/family support (2.02), and Equipment and clothing (2.01).ConclusionOnline GCM software facilitated the inclusion of geographically dispersed recipients and provided useful insights into the experiences of LVAD recipients. The conceptual framework identifies important domains and items that should be prioritised and included in patient reported outcomes in future research, LVAD design evolution, and clinical practice

    Arene oxidation with malonoyl peroxides

    Get PDF
    Malonoyl peroxide 7, prepared in a single step from the commercially available diacid, is an effective reagent for the oxidation of aromatics. Reaction of an arene with peroxide 7 at room temperature leads to the corresponding protected phenol which can be unmasked by aminolysis. An ionic mechanism consistent with the experimental findings and supported by isotopic labeling, Hammett analysis, EPR investigations and reactivity profile studies is proposed

    Open-Sourced CIViC Annotation Pipeline to identify and annotate clinically relevant variants using single-molecule molecular inversion probes

    Get PDF
    PURPOSE: Clinical targeted sequencing panels are important for identifying actionable variants for patients with cancer; however, existing approaches do not provide transparent and rationally designed clinical panels to accommodate the rapidly growing knowledge within oncology. MATERIALS AND METHODS: We used the Clinical Interpretations of Variants in Cancer (CIViC) database to develop an Open-Sourced CIViC Annotation Pipeline (OpenCAP). OpenCAP provides methods to identify variants within the CIViC database, build probes for variant capture, use probes on prospective samples, and link somatic variants to CIViC clinical relevance statements. OpenCAP was tested using a single-molecule molecular inversion probe (smMIP) capture design on 27 cancer samples from 5 tumor types. In total, 2,027 smMIPs were designed to target 111 eligible CIViC variants (61.5 kb of genomic space). RESULTS: When compared with orthogonal sequencing, CIViC smMIP sequencing demonstrated a 95% sensitivity for variant detection (n = 61 of 64 variants). Variant allele frequencies for variants identified on both sequencing platforms were highly concordant (Pearson\u27s CONCLUSION: The OpenCAP design paradigm demonstrates the utility of an open-source and open-access database built on attendant community contributions with peer-reviewed interpretations. Use of a public repository for variant identification, probe development, and variant interpretation provides a transparent approach to build dynamic next-generation sequencing-based oncology panels
    • …
    corecore