Excimer laser annealing for fabrication of low-cost solar cells

The goal was to determine if a pulsed excimer laser annealing (PELA) is cost effective compared to a baseline process. An excimer laser pulsed annealing apparatus was built. Three hundred solar cells were fabricated. An economic analysis was performed

Processing of silicon solar cells by ion implantation and laser annealing

Methods to improve the radiation tolerance of silicon cells for spacecraft use are described. The major emphasis of the program was to reduce the process-induced carbon and oxygen impurities in the junction and base regions of the solar cell, and to measure the effect of reduced impurity levels on the radiation tolerance of cells. Substrates of 0.1, 1.0 and 10.0 ohm-cm float-zone material were used as starting material in the process sequence. High-dose, low-energy ion implantation was used to form the junction in n+p structures. Implant annealing was performed by conventional furnace techniques and by pulsed laser and pulsed electron beam annealing. Cells were tested for radiation tolerance at Spire and NASA-LeRC. After irradiation by 1 MeV electrons to a fluence of 10 to the 16th power per sq cm, the cells tested at Spire showed no significant process induced variations in radiation tolerance. However, for cells tested at Lewis to a fluence of 10 to the 15th power per sq cm, ion-implanted cells annealed in vacuum by pulsed electron beam consistently showed the best radiation tolerance for all cell resistivities

Electrodynamics of a flux transfer event: Experimental test of the Southwood model.

On 12 September 1999, a conjunction between two SuperDARN radars and the Ørsted satellite gave, for the first time, simultaneous access to the ionospheric convection enhancement and the field-aligned currents (FACs) associated with a Flux Transfer Event. The radars observed an azimuthally elongated convection flow burst and the Ørsted satellite observed a series of successive small-scale parallel currents alternating between downward and upward. The most poleward pair of currents, whose directions were in agreement with the Southwood model, was observed when Ørsted crossed the front edge of the flow burst. A quantitative comparison of the current density of each FAC and of the Pedersen current density indicates that the closure current for this FACs pair occurred inside the flow burst, confirming the validity of the Southwood model. The Poynting flux carried by the parallel currents was less than 1% of the power carried by the solar wind plasma

Macroeconomic Fluctuations, Inequality, and Human Development

This paper examines the two-way relationship between inequality and economic fluctuations, and the implications for human development. For years, the dominant paradigm in macroeconomics, which assumed that income distribution did not matter, at least for macroeconomic behavior, ignored inequality--both its role in causing crises and the effect of fluctuations in general, and crises in particular, on inequality. But the most recent financial crisis has shown the errors in this thinking, and these views are finally beginning to be questioned. Economists who had looked at the average equity of a homeowner--ignoring the distribution--felt comfortable that the economy could easily withstand a large fall in housing prices. When such a fall occurred, however, it had disastrous effects, because a large fraction of homeowners owed more on their homes than the value of the home, leading to waves of foreclosure and economic stress. Policy-makers and economists alike have begun to take note: inequality can contribute to volatility and the creation of crises, and volatility can contribute to inequality. Here, we explore the variety of channels through which inequality affects fluctuations and fluctuations affect inequality, and explore how some of the changes in our economy may have contributed to increased inequality and volatility both directly and indirectly. After describing the two-way relationship, the paper discusses hysteresis--the fact that the consequences of an economic downturn can be long-lived. Then, it examines how policy can either mitigate or exacerbate the inequality consequences of economic downturns, and shows how well-intentioned policies can sometimes be counterproductive. Finally, it links these issues to human development, especially in developing countries

Excimer laser annealing for fabrication of low-cost solar cells

Pulsed excimer laser annealing was successfully performed using a 50 w laser. Both polished and texturized cells were tried, however, there are serious problems with nonuniformity on texturized cells. A number of cells were produced and compared to diffusion furnace annealed cells. There was no clear economic advantage in using an excimer laser and there was a small penalty on average efficiency. The conclusion was that the excimer laser anneal process must be able to produce superior cells to be considered as a viable process option

Horava-Lifshitz gravity: tighter constraints for the Kehagias-Sfetsos solution from new solar system data

We analytically work out the perturbation induced by the Kehagias-Sfetsos (KS) space-time solution of the Horava-Lifshitz (HL) modified gravity at long distances on the two-body range for a pair of test particles A and B orbiting the same mass M. We apply our results to the most recently obtained range-residuals \delta\rho for some planets of the solar system (Mercury, Mars, Saturn) ranged from the Earth to effectively constrain the dimensionsless KS parameter \psi_0 for the Sun. We obtain \psi_0 >= 7.2 x 10^-10 (Mercury), \psi_0 >= 9 x 10^-12 (Mars), \psi_0 >= 1.7 x 10^-12 (Saturn). Such lower bounds are tighter than other ones existing in literature by several orders of magnitude. We also preliminarily obtain \psi_0 >= 8 x 10^-10 for the system constituted by the S2 star orbiting the Supermassive Black Hole (SBH) in the center of the Galaxy.Comment: LaTex2e, 15 pages, 1 table, 3 figures, 31 references. Version matching the one at press in International Journal of Modern Physics D (IJMPD

Three-dimensional viscous flow analysis inside a turbine volute

A three-dimensional numerical method has been developed to analyze the complex flow field inside a turbine volute. Comparisons are made between solutions with different boundary conditions

Sawtooth period changes with mode conversion current drive on Alcator C-Mod

DEFC0299ER54512. Reproduction,  translation,  publication,  use and disposal,  in whole or in part,  by or for the United States government is permitted. Submitted for publication to Plasma Physics and Controlled Fusion. Sawtooth period changes with mode conversion current drive on Alcator C-Mo