53 research outputs found
Preservation of York Minster historic limestone by hydrophobic surface coatings
Magnesian limestone is a key construction component of many historic buildings that is under constant attack from environmental pollutants notably by oxides of sulfur via acid rain, particulate matter sulfate and gaseous SO 2 emissions. Hydrophobic surface coatings offer a potential route to protect existing stonework in cultural heritage sites, however, many available coatings act by blocking the stone microstructure, preventing it from 'breathing' and promoting mould growth and salt efflorescence. Here we report on a conformal surface modification method using self-assembled monolayers of naturally sourced free fatty acids combined with sub-monolayer fluorinated alkyl silanes to generate hydrophobic (HP) and super hydrophobic (SHP) coatings on calcite. We demonstrate the efficacy of these HP and SHP surface coatings for increasing limestone resistance to sulfation, and thus retarding gypsum formation under SO/H O and model acid rain environments. SHP treatment of 19th century stone from York Minster suppresses sulfuric acid permeation
Mass Size Distribution and Chemical Composition of the Surface Layer of Summer and Winter Airborne Particles in Zabrze, Poland
Mass size distributions of ambient aerosol were measured in Zabrze, a heavily industrialized city of Poland, during a summer and a winter season. The chemical analyses of the surface layer of PM10, PM2.5 and PM1 in this area were also performed by X-ray photoelectron spectroscopy (XPS). Results suggested that the influence of an atmospheric aerosol on the health condition of Zabrze residents can be distinctly stronger in winter than in summer because of both: higher concentration level of particulate matter (PM) and higher contribution of fine particles in winter season compared to summer. In Zabrze in June (summer) PM10 and PM2.5 reached about 20 and 14Â ÎŒg/m3, respectively, while in December (winter) 57 and 51Â ÎŒg/m3, respectively. The XPS analysis showed that elemental carbon is the major surface component of studied airborne particles representing about 78%â80% (atomic mass) of all detected elements
Particle length-dependent titanium dioxide nanomaterials toxicity and bioactivity
<p>Abstract</p> <p>Background</p> <p>Titanium dioxide (TiO<sub>2</sub>) nanomaterials have considerable beneficial uses as photocatalysts and solar cells. It has been established for many years that pigment-grade TiO<sub>2 </sub>(200 nm sphere) is relatively inert when internalized into a biological model system (in vivo or in vitro). For this reason, TiO<sub>2 </sub>nanomaterials are considered an attractive alternative in applications where biological exposures will occur. Unfortunately, metal oxides on the nanoscale (one dimension < 100 nm) may or may not exhibit the same toxic potential as the original material. A further complicating issue is the effect of modifying or engineering of the nanomaterial to be structurally and geometrically different from the original material.</p> <p>Results</p> <p>TiO<sub>2 </sub>nanospheres, short (< 5 ÎŒm) and long (> 15 ÎŒm) nanobelts were synthesized, characterized and tested for biological activity using primary murine alveolar macrophages and in vivo in mice. This study demonstrates that alteration of anatase TiO<sub>2 </sub>nanomaterial into a fibre structure of greater than 15 ÎŒm creates a highly toxic particle and initiates an inflammatory response by alveolar macrophages. These fibre-shaped nanomaterials induced inflammasome activation and release of inflammatory cytokines through a cathepsin B-mediated mechanism. Consequently, long TiO<sub>2 </sub>nanobelts interact with lung macrophages in a manner very similar to asbestos or silica.</p> <p>Conclusions</p> <p>These observations suggest that any modification of a nanomaterial, resulting in a wire, fibre, belt or tube, be tested for pathogenic potential. As this study demonstrates, toxicity and pathogenic potential change dramatically as the shape of the material is altered into one that a phagocytic cell has difficulty processing, resulting in lysosomal disruption.</p
Role of Surface Area, Primary Particle Size, and Crystal Phase on Titanium Dioxide Nanoparticle Dispersion Properties
Characterizing nanoparticle dispersions and understanding the effect of parameters that alter dispersion properties are important for both environmental applications and toxicity investigations. The role of particle surface area, primary particle size, and crystal phase on TiO2 nanoparticle dispersion properties is reported. Hydrodynamic size, zeta potential, and isoelectric point (IEP) of ten laboratory synthesized TiO2 samples, and one commercial Degussa TiO2 sample (P25) dispersed in different solutions were characterized. Solution ionic strength and pH affect titania dispersion properties. The effect of monovalent (NaCl) and divalent (MgCl2) inert electrolytes on dispersion properties was quantified through their contribution to ionic strength. Increasing titania particle surface area resulted in a decrease in solution pH. At fixed pH, increasing the particle surface area enhanced the collision frequency between particles and led to a higher degree of agglomeration. In addition to the synthesis method, TiO2 isoelectric point was found to be dependent on particle size. As anatase TiO2 primary particle size increased from 6 nm to 104 nm, its IEP decreased from 6.0 to 3.8 that also results in changes in dispersion zeta potential and hydrodynamic size. In contrast to particle size, TiO2 nanoparticle IEP was found to be insensitive to particle crystal structure
Transport and retention of carbon-based engineered and natural nanoparticles through saturated porous media
Recommended from our members
Crystal Clear? Microspectroscopic Imaging and Physicochemical Characterization of Indoor Depositions on Window Glass
Deposition and surface-mediated reactions of adsorbed species can play a role in the level of exposure of occupants to indoor pollutants, which include gases and particles. Detailed molecular-level descriptions of these processes occurring on indoor surfaces are difficult to obtain because of the ever-increasing types of surfaces and their proximity to a variety of different indoor emission sources. The results of an investigation of interactions of glass surfaces in unique indoor environments are described here. Window glass, a ubiquitous indoor surface, was placed vertically in six different locations to assess differences in particle and coating depositions. Atomic force microscopy-photothermal infrared (AFM-PTIR) spectroscopic analysis of these glass surfaces reveals differences in morphology and chemical composition, which reflects the diversity of surface processes found in local environments indoors. Overall, this detailed microspectroscopic imaging method shows deposition of particles and the formation of organic thin films that increase the surface area and surface roughness of the glass surface. PTIR spectroscopy demonstrates that depositions can be linked to primary emitters intrinsic to each of the different local environments
Advancing Model Systems for Fundamental Laboratory Studies of Sea Spray Aerosol Using the Microbial Loop
Sea spray aerosol (SSA) particles represent one of the most abundant surfaces available for heterogeneous reactions to occur upon and thus profoundly alter the composition of the troposphere. In an effort to better understand tropospheric heterogeneous reaction processes, fundamental laboratory studies must be able to accurately reproduce the chemical complexity of SSA. Here we describe a new approach that uses microbial processes to control the composition of seawater and SSA particle composition. By inducing a phytoplankton bloom, we are able to create dynamic ecosystem interactions between marine microorganisms, which serve to alter the organic mixtures present in seawater. Using this controlled approach, changes in seawater composition become reflected in the chemical composition of SSA particles 4 to 10 d after the peak in chlorophyll-a. This approach for producing and varying the chemical complexity of a dominant tropospheric aerosol provides the foundation for further investigations of the physical and chemical properties of realistic SSA particles under controlled conditions
Microbial Control of Sea Spray Aerosol Composition: A Tale of Two Blooms
With the oceans covering 71% of the Earth, sea spray aerosol (SSA) particles profoundly impact climate through their ability to scatter solar radiation and serve as seeds for cloud formation. The climate properties can change when sea salt particles become mixed with insoluble organic material formed in ocean regions with phytoplankton blooms. Currently, the extent to which SSA chemical composition and climate properties are altered by biological processes in the ocean is uncertain. To better understand the factors controlling SSA composition, we carried out a mesocosm study in an isolated ocean-atmosphere facility containing 3,400 gallons of natural seawater. Over the course of the study, two successive phytoplankton blooms resulted in SSA with vastly different composition and properties. During the first bloom, aliphatic-rich organics were enhanced in submicron SSA and tracked the abundance of phytoplankton as indicated by chlorophyll-a concentrations. In contrast, the second bloom showed no enhancement of organic species in submicron particles. A concurrent increase in ice nucleating SSA particles was also observed only during the first bloom. Analysis of the temporal variability in the concentration of aliphatic-rich organic species, using a kinetic model, suggests that the observed enhancement in SSA organic content is set by a delicate balance between the rate of phytoplankton primary production of labile lipids and enzymatic induced degradation. This study establishes a mechanistic framework indicating that biological processes in the ocean and SSA chemical composition are coupled not simply by ocean chlorophyll-a concentrations, but are modulated by microbial degradation processes. This work provides unique insight into the biological, chemical, and physical processes that control SSA chemical composition, that when properly accounted for may explain the observed differences in SSA composition between field studies. \ua9 2015 American Chemical Society
- âŠ