Changes in epidemiological patterns of sea lice infestation on farmed Atlantic salmon, Salmo salar L., in Scotland between 1996 and 2006

Analyses of a unique database containing sea lice records over an 11 year period provide evidence of changing infestation patterns in Scotland. The data, collected from more than 50 commercial Atlantic salmon farms, indicate that both species of sea lice commonly found in Scotland, Lepeophtheirus salmonis and Caligus elongatus, have declined on farms over the past decade. Reductions for both species have been particularly marked since 2001 when more effective veterinary medicines became available. Treatment data were also available in the database and these show a growing trend towards the use of the in feed medication emamectin benzoate (Slice), particularly in the first year of the salmon production cycle. However, this trend to wards single product use has not been sustained in 2006, the latest year for which data are available. There is some evidence of region to region variation within Scotland with the Western Isles experiencing higher levels of infestation. However, compared to the levels observed between 1996 and 2000, all regions have benefited from reduced lice infestation, with the overall pattern showing a particular reduction in the second and third quarters of the second year of production

Volume Comparison for Hypersurfaces in Lorentzian Manifolds and Singularity Theorems

We develop area and volume comparison theorems for the evolution of spacelike, acausal, causally complete hypersurfaces in Lorentzian manifolds, where one has a lower bound on the Ricci tensor along timelike curves, and an upper bound on the mean curvature of the hypersurface. Using these results, we give a new proof of Hawking's singularity theorem.Comment: 15 pages, LaTe

Comparison of stimulation patterns for FES-cycling using measures of oxygen cost and stimulation cost

<b>Aim</b><p></p> The energy efficiency of FES-cycling in spinal cord injured subjects is very much lower than that of normal cycling, and efficiency is dependent upon the parameters of muscle stimulation. We investigated measures which can be used to evaluate the effect on cycling performance of changes in stimulation parameters, and which might therefore be used to optimise them. We aimed to determine whether oxygen cost and stimulation cost measurements are sensitive enough to allow discrimination between the efficacy of different activation ranges for stimulation of each muscle group during constant-power cycling. <p></p> <b>Methods</b><p></p> We employed a custom FES-cycling ergometer system, with accurate control of cadence and stimulated exercise workrate. Two sets of muscle activation angles (“stimulation patterns”), denoted “P1” and “P2”, were applied repeatedly (eight times each) during constant-power cycling, in a repeated measures design with a single paraplegic subject. Pulmonary oxygen uptake was measured in real time and used to determine the oxygen cost of the exercise. A new measure of stimulation cost of the exercise is proposed, which represents the total rate of stimulation charge applied to the stimulated muscle groups during cycling. A number of energy-efficiency measures were also estimated. <p></p> <b>Results</b><p></p> Average oxygen cost and stimulation cost of P1 were found to be significantly lower than those for P2 (paired <i>t</i>-test, <i>p</i> < 0.05): oxygen costs were 0.56 ± 0.03 l min<sup>−1</sup> and 0.61 ± 0.04 l min<sup>−1</sup>(mean ± S.D.), respectively; stimulation costs were 74.91 ± 12.15 mC min<sup>−1</sup> and 100.30 ± 14.78 mC min<sup>−1</sup> (mean ± S.D.), respectively. Correspondingly, all efficiency estimates for P1 were greater than those for P2. <p></p> <b>Conclusion</b><p></p> Oxygen cost and stimulation cost measures both allow discrimination between the efficacy of different muscle activation patterns during constant-power FES-cycling. However, stimulation cost is more easily determined in real time, and responds more rapidly and with greatly improved signal-to-noise properties than the ventilatory oxygen uptake measurements required for estimation of oxygen cost. These measures may find utility in the adjustment of stimulation patterns for achievement of optimal cycling performance. <p></p&gt

Nano-Immunodetection and Quantification of Mycobacteria in Metalworking Fluids

The accurate detection and enumeration of mycobacteria in metalworking fluids (MWFs) is imperative from an environmental protection and occupational health perspective. We report here on a comparison of the labeling efficiency of nano-immunomagnetic particles (NIMP) and free antibody (FAb) to detect mycobacteria in semisynthetic MWF by using both traditional visualization analysis and cluster analysis aided visualization analysis (CAAVA). The NIMP labeling method involved coating nanometer-scale magnetic particles with Protein A, and oriented conjugation of polyclonal antibodies specific to Mycobacterium spp. The FAb labeling method is modified from the traditional immunofluorescence (IF) method for more efficient detection of mycobacteria in a model MWF. The labeling efficiency of NIMP and FAb were 7.2 ± 4.6 and 16.3 ± 5.5%, and the specificity 85.0 ± 6.1 and 88.1 ± 10.5%, respectively, based on traditional visualization analysis. Based on CAAVA analysis, the labeling efficiency of NIMP and FAb increased to 12.4 ± 1.6 and 20.5 ± 3.9%, and the specificity to 97.8 ± 3.2 and 98.5 ± 2.5%, respectively. A linear relationship of FCM counts and seeded concentrations was observed over four orders of magnitude (R 2 ≤ 0.99) in pure and ternary cultures. The results strongly support the applicability of either FAb or NIMP coupled with CAAVA and flow cytometry for rapid detection and enumeration of mycobacteria in complex matrices.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/63114/1/ees.2007.24.58.pd

Three-dimensional lattice-Boltzmann simulations of critical spinodal decomposition in binary immiscible fluids

We use a modified Shan-Chen, noiseless lattice-BGK model for binary immiscible, incompressible, athermal fluids in three dimensions to simulate the coarsening of domains following a deep quench below the spinodal point from a symmetric and homogeneous mixture into a two-phase configuration. We find the average domain size growing with time as $t^\gamma$, where $\gamma$ increases in the range $0.545 < \gamma < 0.717$, consistent with a crossover between diffusive $t^{1/3}$ and hydrodynamic viscous, $t^{1.0}$, behaviour. We find good collapse onto a single scaling function, yet the domain growth exponents differ from others' works' for similar values of the unique characteristic length and time that can be constructed out of the fluid's parameters. This rebuts claims of universality for the dynamical scaling hypothesis. At early times, we also find a crossover from $q^2$ to $q^4$ in the scaled structure function, which disappears when the dynamical scaling reasonably improves at later times. This excludes noise as the cause for a $q^2$ behaviour, as proposed by others. We also observe exponential temporal growth of the structure function during the initial stages of the dynamics and for wavenumbers less than a threshold value.Comment: 45 pages, 18 figures. Accepted for publication in Physical Review

Measurement of Creep Deformation across Welds in 316H Stainless Steel Using Digital Image Correlation

Spatially resolved measurement of creep deformation across weldments at high temperature cannot be achieved using standard extensometry approaches. In this investigation, a Digital Image Correlation (DIC) based system has been developed for long-term high-temperature creep strain measurement in order to characterise the material deformation behaviour of separate regions of a multi-pass weld. The optical system was sufficiently stable to allow a sequence of photographs to be taken suitable for DIC analysis of creep specimens tested at a temperature of 545 °C for over 2000 h. The images were analysed to produce local creep deformation curves from two cross-weld samples cut from contrasting regions of a multi-pass V-groove weld joining thick-section AISI Type 316H austenitic stainless steel. It is shown that for this weld, the root pass is the weakest region of the structure in creep, most likely due to the large number of thermal cycles it has experienced during the fabrication process. The DIC based measurement method offers improved spatial resolution over conventional methods and greatly reduces the amount of material required for creep characterisation of weldments

Search for heavy neutrinos mixing with tau neutrinos

We report on a search for heavy neutrinos (\nus) produced in the decay D_s\to \tau \nus at the SPS proton target followed by the decay \nudecay in the NOMAD detector. Both decays are expected to occur if \nus is a component of $\nu_{\tau}$.\ From the analysis of the data collected during the 1996-1998 runs with $4.1\times10^{19}$ protons on target, a single candidate event consistent with background expectations was found. This allows to derive an upper limit on the mixing strength between the heavy neutrino and the tau neutrino in the \nus mass range from 10 to 190 $\rm MeV$. Windows between the SN1987a and Big Bang Nucleosynthesis lower limits and our result are still open for future experimental searches. The results obtained are used to constrain an interpretation of the time anomaly observed in the KARMEN1 detector.\Comment: 20 pages, 7 figures, a few comments adde

Solar Wind Turbulence and the Role of Ion Instabilities

International audienc

Overcritical states of a superconductor strip in a magnetic environment

A current-carrying superconducting strip partly penetrated by magnetic flux and surrounded by a bulk magnet of high permeability is considered. Two types of samples are studied: those with critical current controlled by an edge barrier dominating over the pinning, and those with high pinning-mediated critical current masking the edge barrier.It is shown for both cases that the current distribution in a central flux-free part of the strip is strongly affected by the actual shape of the magnetic surroundings. Explicit analytical solutions for the sheet current and self-field distributions are obtained which show that, depending on the geometry, the effect may suppress the total loss-free transport current of the strip or enhance it by orders of magnitude. The effect depends strongly on the shape of the magnet and its distance to the superconductor but only weakly on the magnetic permeability.Comment: 20 pages, 20 figure