Probability distribution function of dipolar field in two-dimensional spin ensemble

We theoretically determine the probability distribution function of the net field of the random planar structure of dipoles which represent polarized particles. At small surface concentrations c of the point dipoles this distribution is expressed in terms of special functions. At the surface concentrations of the dipoles as high as 0.6 the dipolar field obey the Gaussian law. To obtain the distribution function within transitional region c<0.6, we propose the method based on the cumulant expansion. We calculate the parameters of the distributions for some specific configurations of the dipoles. The distribution functions of the ordered ensembles of the dipoles at the low and moderate surface concentrations have asymmetric shape with respect to distribution medians. The distribution functions allow to calculate various physical parameters of two-dimensional interacting nanoparticle ensembles.Comment: 9 pages, 3 figure

Characteristics of Conservation Laws for Difference Equations

Each conservation law of a given partial differential equation is determined (up to equivalence) by a function known as the characteristic. This function is used to find conservation laws, to prove equivalence between conservation laws, and to prove the converse of Noether's Theorem. Transferring these results to difference equations is nontrivial, largely because difference operators are not derivations and do not obey the chain rule for derivatives. We show how these problems may be resolved and illustrate various uses of the characteristic. In particular, we establish the converse of Noether's Theorem for difference equations, we show (without taking a continuum limit) that the conservation laws in the infinite family generated by Rasin and Schiff are distinct, and we obtain all five-point conservation laws for the potential Lotka-Volterra equation

Bubbling AdS and droplet descriptions of BPS geometries in IIB supergravity

This paper focuses on supergravity duals of BPS states in N=4 super Yang-Mills. In order to describe these duals, we begin with a sequence of breathing mode reductions of IIB supergravity: first on S^3, then S^3 x S^1, and finally on S^3 x S^1 x CP^1. We then follow with a complete supersymmetry analysis, yielding 1/8, 1/4 and 1/2 BPS configurations, respectively (where in the last step we take the Hopf fibration of S^3). The 1/8 BPS geometries, which have an S^3 isometry and are time-fibered over a six-dimensional base, are determined by solving a non-linear equation for the Kahler metric on the base. Similarly, the 1/4 BPS configurations have an S^3 x S^1 isometry and a four-dimensional base, whose Kahler metric obeys another non-linear, Monge-Ampere type equation. Despite the non-linearity of the problem, we develop a universal bubbling AdS description of these geometries by focusing on the boundary conditions which ensure their regularity. In the 1/8 BPS case, we find that the S^3 cycle shrinks to zero size on a five-dimensional locus inside the six-dimensional base. Enforcing regularity of the full solution requires that the interior of a smooth, generally disconnected five-dimensional surface be removed from the base. The AdS_5 x S^5 ground state corresponds to excising the interior of an S^5, while the 1/8 BPS excitations correspond to deformations (including topology change) of the S^5 and/or the excision of additional droplets from the base. In the case of 1/4 BPS configurations, by enforcing regularity conditions, we identify three-dimensional surfaces inside the four-dimensional base which separate the regions where the S^3 shrinks to zero size from those where the S^1 shrinks.Comment: 94 pages, 6 figures, latex, typos corrected, references added, one new Appendi

Neuroligin 1 is dynamically exchanged at postsynaptic sites

Neuroligins are postsynaptic cell adhesion molecules that associate with presynaptic neurexins. Both factors form a transsynaptic connection, mediate signaling across the synapse, specify synaptic functions, and play a role in synapse formation. Neuroligin dysfunction impairs synaptic transmission, disrupts neuronal networks, and is thought to participate in cognitive diseases. Here we report that chemical treatment designed to induce long-term potentiation or long-term depression (LTD) induces neuroligin 1/3 turnover, leading to either increased or decreased surface membrane protein levels, respectively. Despite its structural role at a crucial transsynaptic position, GFP-neuroligin 1 leaves synapses in hippocampal neurons over time with chemical LTD-induced neuroligin internalization depending on an intact microtubule cytoskeleton. Accordingly, neuroligin 1 and its binding partner postsynaptic density protein-95 (PSD-95) associate with components of the dynein motor complex and undergo retrograde cotransport with a dynein subunit. Transgenic depletion of dynein function in mice causes postsynaptic NLG1/3 and PSD-95 enrichment. In parallel, PSD lengths and spine head sizes are significantly increased, a phenotype similar to that observed upon transgenic overexpression of NLG1 (Dahlhaus et al., 2010). Moreover, application of a competitive PSD-95 peptide and neuroligin 1 C-terminal mutagenesis each specifically alter neuroligin 1 surface membrane expression and interfere with its internalization. Our data suggest the concept that synaptic plasticity regulates neuroligin turnover through active cytoskeleton transport

Enhancement of the upper critical field by nonmagnetic impurities in dirty two-gap superconductors

Quasiclassic Uzadel equations for two-band superconductors in the dirty limit with the account of both intraband and interband scattering by nonmagnetic impurities are derived for any anisotropic Fermi surface. From these equations the Ginzburg-Landau equations, and the critical temperature $T_c$ are obtained. An equation for the upper critical field, which determines both the temperature dependence of $H_{c2}(T)$ and the orientational dependence of $H_{c2}(\theta)$ as a function of the angle $\theta$ between ${\bf H}$ and the c-axis is obtained. It is shown that the shape of the $H_{c2}(T)$ curve essentially depends on the ratio of the intraband electron diffusivities $D_1$ and $D_1$, and can be very different from the standard one-gap dirty limit theory. In particular, the value $H_{c2}(0)$ can considerably exceed $0.7T_cdH_{c2}/dT_c$, which can have important consequences for applications of $MgB_2$. A scaling relation is proposed which enables one to obtain the angular dependence of $H_{c2}(\theta)$ from the equation for $H_{c2}$ at ${\bf H}\| c$. It is shown that, depending on the relation between $D_1$ and $D_2$, the ratio of the upper critical field $H_{c2}^\|/H_{c2}^\perp$ for ${\bf H}\| ab$ and ${\bf H}\perp ab$ can both increase and decrease as the temperature decreases. Implications of the obtained results for $MgB_2$ are discussed

Gluino Contribution to Radiative B Decays: Organization of QCD Corrections and Leading Order Results

The gluino-induced contributions to the decay b-> s gamma are investigated in supersymmetric frameworks with generic sources of flavour violation. It is shown that, when QCD corrections are taken into account, the relevant operator basis of the Standard Model effective Hamiltonian gets enlarged to contain: i) magnetic and chromomagnetic operators with a factor of alpha_s and weighted by a quark mass m_b or m_c; ii) magnetic and chromomagnetic operators of lower dimensionality, also containing alpha_s; iii) four-quark operators weighted by a factor alpha_s^2. Numerical results are given, showing the effects of the leading order QCD corrections on the inclusive branching ratio for b-> s gamma. Constraints on supersymmetric sources of flavour violation are derived.Comment: 36 pages including 16 postscript figures; uses epsf; journal version: one ref. added; rephrasing of a couple of paragraph

Dust Devil Tracks

Dust devils that leave dark- or light-toned tracks are common on Mars and they can also be found on the Earth’s surface. Dust devil tracks (hereinafter DDTs) are ephemeral surface features with mostly sub-annual lifetimes. Regarding their size, DDT widths can range between ∼1 m and ∼1 km, depending on the diameter of dust devil that created the track, and DDT lengths range from a few tens of meters to several kilometers, limited by the duration and horizontal ground speed of dust devils. DDTs can be classified into three main types based on their morphology and albedo in contrast to their surroundings; all are found on both planets: (a) dark continuous DDTs, (b) dark cycloidal DDTs, and (c) bright DDTs. Dark continuous DDTs are the most common type on Mars. They are characterized by their relatively homogenous and continuous low albedo surface tracks. Based on terrestrial and martian in situ studies, these DDTs most likely form when surficial dust layers are removed to expose larger-grained substrate material (coarse sands of ≥500 μm in diameter). The exposure of larger-grained materials changes the photometric properties of the surface; hence leading to lower albedo tracks because grain size is photometrically inversely proportional to the surface reflectance. However, although not observed so far, compositional differences (i.e., color differences) might also lead to albedo contrasts when dust is removed to expose substrate materials with mineralogical differences. For dark continuous DDTs, albedo drop measurements are around 2.5 % in the wavelength range of 550–850 nm on Mars and around 0.5 % in the wavelength range from 300–1100 nm on Earth. The removal of an equivalent layer thickness around 1 μm is sufficient for the formation of visible dark continuous DDTs on Mars and Earth. The next type of DDTs, dark cycloidal DDTs, are characterized by their low albedo pattern of overlapping scallops. Terrestrial in situ studies imply that they are formed when sand-sized material that is eroded from the outer vortex area of a dust devil is redeposited in annular patterns in the central vortex region. This type of DDT can also be found in on Mars in orbital image data, and although in situ studies are lacking, terrestrial analog studies, laboratory work, and numerical modeling suggest they have the same formation mechanism as those on Earth. Finally, bright DDTs are characterized by their continuous track pattern and high albedo compared to their undisturbed surroundings. They are found on both planets, but to date they have only been analyzed in situ on Earth. Here, the destruction of aggregates of dust, silt and sand by dust devils leads to smooth surfaces in contrast to the undisturbed rough surfaces surrounding the track. The resulting change in photometric properties occurs because the smoother surfaces have a higher reflectance compared to the surrounding rough surface, leading to bright DDTs. On Mars, the destruction of surficial dust-aggregates may also lead to bright DDTs. However, higher reflective surfaces may be produced by other formation mechanisms, such as dust compaction by passing dust devils, as this may also cause changes in photometric properties. On Mars, DDTs in general are found at all elevations and on a global scale, except on the permanent polar caps. DDT maximum areal densities occur during spring and summer in both hemispheres produced by an increase in dust devil activity caused by maximum insolation. Regionally, dust devil densities vary spatially likely controlled by changes in dust cover thicknesses and substrate materials. This variability makes it difficult to infer dust devil activity from DDT frequencies. Furthermore, only a fraction of dust devils leave tracks. However, DDTs can be used as proxies for dust devil lifetimes and wind directions and speeds, and they can also be used to predict lander or rover solar panel clearing events. Overall, the high DDT frequency in many areas on Mars leads to drastic albedo changes that affect large-scale weather patterns

Field Measurements of Terrestrial and Martian Dust Devils

Surface-based measurements of terrestrial and martian dust devils/convective vortices provided from mobile and stationary platforms are discussed. Imaging of terrestrial dust devils has quantified their rotational and vertical wind speeds, translation speeds, dimensions, dust load, and frequency of occurrence. Imaging of martian dust devils has provided translation speeds and constraints on dimensions, but only limited constraints on vertical motion within a vortex. The longer mission durations on Mars afforded by long operating robotic landers and rovers have provided statistical quantification of vortex occurrence (time-of-sol, and recently seasonal) that has until recently not been a primary outcome of more temporally limited terrestrial dust devil measurement campaigns. Terrestrial measurement campaigns have included a more extensive range of measured vortex parameters (pressure, wind, morphology, etc.) than have martian opportunities, with electric field and direct measure of dust abundance not yet obtained on Mars. No martian robotic mission has yet provided contemporaneous high frequency wind and pressure measurements. Comparison of measured terrestrial and martian dust devil characteristics suggests that martian dust devils are larger and possess faster maximum rotational wind speeds, that the absolute magnitude of the pressure deficit within a terrestrial dust devil is an order of magnitude greater than a martian dust devil, and that the time-of-day variation in vortex frequency is similar. Recent terrestrial investigations have demonstrated the presence of diagnostic dust devil signals within seismic and infrasound measurements; an upcoming Mars robotic mission will obtain similar measurement types