A possible source mechanism for magnetotail current sheet flapping

The origin of the flapping motions of the current sheet in the Earth's magnetotail is one of the most interesting questions of magnetospheric dynamics yet to be solved. We have used a polar plane simulation from the global hybrid-Vlasov model Vlasiator to study the characteristics and source of current sheet flapping in the center of the magnetotail. The characteristics of the simulated signatures agree with observations reported in the literature. The flapping is initiated by a hemispherically asymmetric magnetopause perturbation, created by subsolar magnetopause reconnection, that is capable of displacing the tail current sheet from its nominal position. The current sheet displacement propagates downtail at the same pace as the driving magnetopause perturbation. The initial current sheet displacement launches a standing magnetosonic wave within the tail resonance cavity. The travel time of the wave within the local cavity determines the period of the subsequent flapping signatures. Compression of the tail lobes due to added flux affects the cross-sectional width of the resonance cavity as well as the magnetosonic speed within the cavity. These in turn modify the wave travel time and flapping period. The compression of the resonance cavity may also provide additional energy to the standing wave, which may lead to strengthening of the flapping signature. It may be possible that the suggested mechanism could act as a source of kink-like waves that have been observed to be emitted from the center of the tail and to propagate toward the dawn and dusk flanks.Peer reviewe

Survey of Dairy Management Practices on One Hundred Thirteen North Central and Northeastern United States Dairies

The objective was to conduct a broad survey of dairy management practices that have an effect on animal well-being. Dairies were visited during the fall and winter of 2005 and 2006 in Wisconsin, Minnesota, Indiana, Iowa, and New York. Data were collected on 113 dairies on colostrum feeding, dehorning, tail-docking, euthanasia methods, producer statements about welfare, use of specialized calf-raising farms (custom), level of satisfaction with calf-raising by producers, and cow behavior. Calves were raised by the owner on 50.4% of dairies; 30.1% were raised on custom farms during the milk-feeding period, 18.6% were custom raised after weaning, and 1% sold calves with the option to buy them back as first-lactation heifers. A total of 51.8% of producers were very satisfied with their current calf-raising methods. Three feedings of colostrum were fed to the calves on 23.9% of dairies, 2 feedings on 39.8% of farms, 1 feeding on 31.0% of farms, and colostrum replacement products were fed on 5.3% of farms. Many farms (61.9%) provided 3.8 L at first feeding. Calves were dehorned at different ages by various methods. By 8 wk, 34.5% of calves were dehorned. By 12 wk, 78.8% of calves were dehorned. The majority of calves were dehorned by hot iron (67.3%). The remainder were dehorned by gouging (8.8%), paste (9.7%), saw (3.5%), or unknown by calf owner (10.6%). Anesthetic use was reported by 12.4% of dairy owners and analgesia use by 1.8%. Tail-docking was observed on 82.3% of dairies. The most common reported docking time was pre- or postcalving (35.2%). The second most commonly reported time was d 1 (15.4%). Rubber band was the most common method (92.5%), followed by amputation (7.5%). Three dairies amputated precalving, 1 at 2 mo and 3 at d 1 or 2. Cow hygiene was the most common reason given to dock (73.5%), followed by parlor worker comfort (17.4%) and udder health (1.0%). Producers reported 2.0% of cows obviously lame. Gun was the preferred euthanasia method (85.7%), followed by i.v. euthanasia (8.0%), live pick-up (1.8%), and nondisclosure (3.5%). Most producers (77.9%) stated that cows were in an improved environment as compared with 20 yr ago, whereas 8.0% stated conditions were worse, and 14.2% were undecided. Dairies with higher percentages of cows that either approached or touched the observer had lower somatic cell counts. The survey results showed management practices that were important for animal welfare

Hybrid-Vlasov modeling of three-dimensional dayside magnetopause reconnection

Dayside magnetic reconnection at the magnetopause, which is a major driver of space weather, is studied for the first time in a three-dimensional (3D) realistic setup using a hybrid-Vlasov kinetic model. A noon-midnight meridional plane simulation is extended in the dawn-dusk direction to cover 7 Earth radii. The southward interplanetary magnetic field causes magnetic reconnection to occur at the subsolar magnetopause. Perturbations arising from kinetic instabilities in the magnetosheath appear to modulate the reconnection. Its characteristics are consistent with multiple, bursty, and patchy magnetopause reconnection. It is shown that the kinetic behavior of the plasma, as simulated by the model, has consequences on the applicability of methods such as the four-field junction to identify and analyze magnetic reconnection in 3D kinetic simulations.Peer reviewe

Effect of stall base type on herd health, costs, and producer satisfaction

The objective of this field study was to compare effect of stall base on herd health, stall maintenance, bedding cost, and producer satisfaction. Ninety-one dairies visited during a 4-mo period starting October 14, 2005 included 33 rubber-filled mattress (RFM), 27 sand, and 31 waterbed (WB) dairies. In this study, percent culled was higher for RFM (P = 0.001) and sand (P = 0.06) than WB stall base dairies. Percent of cows in fourth lactation or greater was higher on WB than either RFM (P = 0.01) or sand (P = 0.02) dairies. There was no difference between base types for production or somatic cell count. Bedding cost per bed per week was WB ($0.73), RFM ($0.89), and sand ($0.97). Sand beds were bedded less frequently (P = 0.01). Comparisons between RFM and sand indicate higher satisfaction for RFM regarding manure management (P \u3c 0.0001) and higher satisfaction with sand for cow comfort (P \u3c 0.0001). Producers with WB were more satisfied with base life (P \u3c 0.000 1) and cow comfort (P \u3c 0.000 1) than those with RFM. Producers with WB were more satisfied with cow longevity (P \u3c 0.0001) as compared to RFM. Length of sand stall was correlated with longevity (0.56, P = 0.01) while percent of mature cows was greater on dairies that provided WBs (P = 0.02). This data indicates that WB may be a viable option for cows and producers, when good quality sand is unavailable or handling sand-laden manure is not feasible

Right ventricular outflow tract velocity time integral-to-pulmonary artery systolic pressure ratio: a non-invasive metric of pulmonary arterial compliance differs across the spectrum of pulmonary hypertension.

Pulmonary arterial compliance (PAC), invasively assessed by the ratio of stroke volume to pulmonary arterial (PA) pulse pressure, is a sensitive marker of right ventricular (RV)-PA coupling that differs across the spectrum of pulmonary hypertension (PH) and is predictive of outcomes. We assessed whether the echocardiographically derived ratio of RV outflow tract velocity time integral to PA systolic pressure (RVOT-VTI/PASP) (a) correlates with invasive PAC, (b) discriminates heart failure with preserved ejection-associated PH (HFpEF-PH) from pulmonary arterial hypertension (PAH), and (c) is associated with functional capacity. We performed a retrospective cohort study of patients with PAH (n = 70) and HFpEF-PH (n = 86), which was further dichotomized by diastolic pressure gradient (DPG) into isolated post-capillary PH (DPG \u3c 7 mmHg; Ipc-PH, n = 54), and combined post- and pre-capillary PH (DPG ≥ 7 mm Hg; Cpc-PH, n = 32). Of the 156 patients, 146 had measurable RVOT-VTI or PASP and were included in further analysis. RVOT-VTI/PASP correlated with invasive PAC overall (ρ = 0.61, P \u3c 0.001) and for the PAH (ρ = 0.38, P = 0.002) and HFpEF-PH (ρ = 0.63, P \u3c 0.001) groups individually. RVOT-VTI/PASP differed significantly across the PH spectrum (PAH: 0.13 [0.010-0.25] vs. Cpc-PH: 0.20 [0.12-0.25] vs. Ipc-PH: 0.35 [0.22-0.44]; P \u3c 0.001), distinguished HFpEF-PH from PAH (AUC = 0.72, 95% CI = 0.63-0.81) and Cpc-PH from Ipc-PH (AUC = 0.78, 95% CI = 0.68-0.88), and remained independently predictive of 6-min walk distance after multivariate analysis (standardized β-coefficient = 27.7, 95% CI = 9.2-46.3; P = 0.004). Echocardiographic RVOT-VTI/PASP is a novel non-invasive metric of PAC that differs across the spectrum of PH. It distinguishes the degree of pre-capillary disease within HFpEF-PH and is predictive of functional capacity

Effect of stall base type on herd health, costs, and producer satisfaction

The objective of this field study was to compare effect of stall base on herd health, stall maintenance, bedding cost, and producer satisfaction. Ninety-one dairies visited during a 4-mo period starting October 14, 2005 included 33 rubber-filled mattress (RFM), 27 sand, and 31 waterbed (WB) dairies. In this study, percent culled was higher for RFM (P = 0.001) and sand (P = 0.06) than WB stall base dairies. Percent of cows in fourth lactation or greater was higher on WB than either RFM (P = 0.01) or sand (P = 0.02) dairies. There was no difference between base types for production or somatic cell count. Bedding cost per bed per week was WB ($0.73), RFM ($0.89), and sand ($0.97). Sand beds were bedded less frequently (P = 0.01). Comparisons between RFM and sand indicate higher satisfaction for RFM regarding manure management (P \u3c 0.0001) and higher satisfaction with sand for cow comfort (P \u3c 0.0001). Producers with WB were more satisfied with base life (P \u3c 0.000 1) and cow comfort (P \u3c 0.000 1) than those with RFM. Producers with WB were more satisfied with cow longevity (P \u3c 0.0001) as compared to RFM. Length of sand stall was correlated with longevity (0.56, P = 0.01) while percent of mature cows was greater on dairies that provided WBs (P = 0.02). This data indicates that WB may be a viable option for cows and producers, when good quality sand is unavailable or handling sand-laden manure is not feasible

The welfare of water buffaloes during the slaughter process: a review

This paper reviews the scientific literature on water buffalo welfare in all stages of the live animal supply chain from the farm gate to slaughter (loading/unloading, markets, transportation, handling, lairage, stunning and slaughter) with the objective of identifying risk factors and potential mitigation strategies. Although in some countries legislation exists to protect the welfare of farm animals during transport and killing, the handling practices used to load and unload buffaloes and move them in livestock markets and abattoirs are often harsh. This is frequently due to inadequate equipment designed principally for cattle, and the fact that water buffaloes are considered more temperamental than cattle. Additionally, more reactive animals have increased stress responses to handling, which can lead to more negative human interventions with increased numbers of skin lesions and bruises to the carcasses. During transport, buffaloes may suffer periods of thermal stress due to overstocking, inadequate ventilation and because in many tropical climates trips are made during the hottest time of the day. The anatomical and physiological characteristics of water buffalo make them particularly susceptible to thermal stress in the absence of water for wallowing. Although water buffaloes belong to the same Bovidae family as domestic cattle, certain anatomical features of the head make effective stunning very problematic. Buffaloes have extensive sinuses and frontal bones, meaning that the penetrating captive bolt devices recommended for cattle may prove ineffective in reliably inducing unconsciousness. There is a need for further development of procedures, stunning positions and appropriate devices to improve the efficiency of buffalo stunning. Finally, in many parts of the world where buffalo are routinely slaughtered in basic conditions without prior stunning. Slaughter without stunning can result in pain and stress associated with delays in the time to loss of consciousness, pain from the cutting of the neck and potential distress associated with aspiration of blood into the respiratory tract. Specific legislation, guidelines and handler/stockman/operator training programmes should be developed to improve the welfare of buffaloes during all ante mortem stages of loading, unloading, handling, stunning and slaughter

Influence of Free-Stall Base on Tarsal Joint Lesions and Hygiene in Dairy Cows

The objective was to quantify the incidence of tarsal lesions and level of hygiene by stall bed type. Cows were scored on 100 dairies from Wisconsin, Minnesota, Indiana, Iowa, and New York in the fall and winter. Thirty-eight dairies used rubber-filled mattresses (RFM), 27 had sand beds, 29 had waterbeds, and 6 used compost packs (CPk). Stocking density, stall dimensions, bedding amount, bedding frequency, and type of bedding were recorded. One pen of early-lactation multiparous cows on each dairy was scored based on injury of the tarsal joints at the lateral and medial surfaces and tuber calcis at the dorsal, lateral, and medial surfaces. A tarsal score of 1 represented hair loss, 2 was moderate, and 3 indicated severe swelling. Differences between bed types in the percentages of cows with lesions were tested with one-way ANOVA by lesion severity and incidence, with farm as the experimental unit. Cows on sand beds or waterbeds had fewer lesion scores of 1, 2, and 3 than those on RFM. The percentages of score 1 were 54.6 ± 4.4 (RFM), 22.5 ± 4.7 (sand), and 29.8 ± 4.3 (waterbed), whereas the percentages of score 2 were 14.0 ± 1.4, 2.3 ± 1.5, and 5.0 ± 1.4, and of score 3 were 3.0 ± 0.4, 0.2 ± 0.4, and 0.4 ± 0.4. Cows on CPk had no lesions. Hygiene scores ranged from 1 to 5, with 1 being clean and 5 soiled. The percentages of hygiene score 1 were 0 (compost), 0.4 (RFM), 0.4 (sand), and 0.4 (waterbeds); those with score 2 were 79.0, 84.0 ± 0.01, 73.2 ± 0.01, and 80.4 ± 0.01; with score 3 were 20.3, 15.2 ± 0.01, 23.8 ± 0.01, and 18.6 ± 0.01; with score 4 were 0.8, 0.005 ± 0.001, 0.006 ± 0.001, and 0.025 ± 0.003; and with score 5 was 0 for all bed types. Cows on RFM and waterbeds had improved hygiene compared with cows on sand beds. There was no difference in somatic cell count (SCC) by bed type. The percentage of cows in fourth lactation or greater on waterbeds (19.8 ± 1.8) was greater than those on RFM (13.3 ± 1.6) or on sand (13.5 ± 1.8). The percentage culled was lower for cows on waterbeds than on RFM (22.8 ± 1.5 vs. 29.4 ± 1.4). Score 3 tarsal lesions were correlated (r = 0.60) with SCC. The length of the sand bed was correlated with a greater percentage of mature cows. The SCC was correlated with the percentage of cows reported lame on the day of the visit (r = 0.45) and with neck rail height (r = −0.26). On dairies with RFM, severe lesions (r = 0.60), death losses (r = 0.52), and percentage of the herd reported lame on the day of the visit (r = 0.52) were all correlated with the SCC. Dairies with higher percentages of lesions had higher SCC, death losses, lameness, and culling rates. Adding bedding several times per week may reduce the incidence of lesions