Combination of polymeric superplasticizers, water repellents and pozzolanic agents to improve air lime-based grouts for historic masonry repair

This paper presents the experimental procedure to develop air lime-based injection grouts including polymeric superplasticizers, a water repellent agent and pozzolanic agents as additives. Research focuses on the development of grouts to improve various characteristics simultaneously combining different additions and admixtures. Aiming to improve the injectability of the grouts, in this study different polymeric superplasticizers were added, namely polycarboxylated-ether derivative (PCE), polynaphthalene sulfonate (PNS) and condensate of melamine-formaldehyde sulfonate (SMFC). Sodium oleate was also used as a water repellent agent to reduce the water absorption. The enhancement of the strength and setting time was intended by using microsilica and metakaolin as pozzolanic mineral additions. Compatibility between the different admixtures and action mechanism of the different polymers were studied by means of zeta potential and adsorption isotherms measurements. Diverse grout mixtures were produced and investigated assessing their injectability, fluidity, stability, compressive strength, hydrophobicity and durability. This research leads to several suitable mixtures produced by using more than one component to enhance efficiency and to provide better performance of grouts. According to the results, the grout composed of air lime, metakaolin, sodium oleate and PCE was found the most effective composition improving the mechanical strength, injectability and hydrophobicity

Morteros de relleno para restauración de patrimonio cultural, con base cal con adición puzolánica y diversos aditivos

Los morteros de relleno o inyección, especialmente destinados a reparación de cavidades y defectos de albañilería, deben fluir adecuadamente en estado fresco y combinar resistencia y durabilidad. Para conseguir algunas de estas características pueden utilizarse aditivos químicos: superplastificantes, para mejorar la fluidez; adiciones puzolánicas, para conseguir resistencias adecuadas en ambientes con limitado acceso de CO2 y una mejora de la durabilidad; e hidrofugantes, de manera que, sin perjudicar la permeabilidad de estos materiales al vapor de agua, se evite la penetración de agua por capilaridad mejorando la durabilidad. Sin embargo, en la mayor parte de los casos, toda la información disponible se circunscribe al efecto de un único aditivo, sin contemplar el posible efecto conjunto o incluso sinérgico de las combinaciones más interesantes de dos o más aditivos y/o adiciones puzolánicas. El estudio de las sinergias entre estos componentes ofrece posibilidades muy interesantes de avance científico-técnico. Precisamente este es el objetivo del trabajo: diseño de nuevos morteros de inyección de cal que puedan ser utilizados para la restauración del Patrimonio Edificado mediante combinación adecuada de aditivos superplastificantes (éteres de policarboxilato, condensados de naftaleno-formaldehído, sulfonato de melamina y ácido poliacrílico), hidrofugante (oleato sódico) y adiciones minerales puzolánicas (microsílice y metacaolín)

Cardiotrophin-1 promotes a high survival rate in rabbits with lethal fulminant hepatitis of viral origin

Rabbit hemorrhagic disease virus (RHDV) causes lethal fulminant hepatitis closely resembling acute liver failure (ALF) in humans. In this study, we investigated whether cardiotrophin-1 (CT-1), a cytokine with hepatoprotective properties, could attenuate liver damage and prolong survival in virus-induced ALF. Twenty-four rabbits were infected with 2 × 10(4) hemagglutination units of RHDV. Twelve received five doses of CT-1 (100 μg/kg) starting at 12 h postinfection (hpi) (the first three doses every 6 h and then two additional doses at 48 and 72 hpi), while the rest received saline. The animals were analyzed for survival, serum biochemistry, and viral load. Another cohort (n = 22) was infected and treated similarly, but animals were sacrificed at 30 and 36 hpi to analyze liver histology, viral load, and the expression of factors implicated in liver damage and repair. All infected rabbits that received saline died by 60 hpi, while 67% of the CT-1-treated animals survived until the end of the study. Treated animals showed improved liver function and histology, while the viral loads were similar. In the livers of CT-1-treated rabbits we observed reduction of oxidative stress, diminished PARP1/2 and JNK activation, and decreased inflammatory reaction, as reflected by reduced expression of tumor necrosis factor alpha, interleukin-1β, Toll-like receptor 4, VCAM-1, and MMP-9. In addition, CT-1-treated rabbits exhibited marked upregulation of TIMP-1 and increased expression of cytoprotective and proregenerative growth factors, including platelet-derived growth factor B, epidermal growth factor, platelet-derived growth factor receptor β, and c-Met. In conclusion, in a lethal form of acute viral hepatitis, CT-1 increases animal survival by attenuating inflammation and activating cytoprotective mechanisms, thus representing a promising therapy for ALF of viral origin

Possible metabolic interplay between quality of life and fecal microbiota in a presenior population: Preliminary results

Objectives: The number of people aged 60 y is increasing worldwide, so establishing a relationship between lifestyle and health-associated factors, such as gut microbiota in an older population, is important. This study aimed to characterize the gut microbiota of a presenior population, and analyze the association between some bacteria and quality of life with the Short Form (SF) 36 questionnaire. Methods: Participants were adult men and women ages 50 to 80 y (n = 74). In addition to the SF-36 question- naire, fecal samples were collected in cryotubes, and 16S RNA gene sequencing was performed to character- ize microbial features. Participants were classified into two groups according to SF-36 punctuation. Linear and logistic regression models were performed to assess the possible association between any bacterial bowl and SF-36 score. Receiver operating characteristics curves were fitted to define the relative diagnostic strength of different bacterial taxa for the correct determination of quality of life. Results: A positive relationship was established between SF-36 score and Actinobacteria (P = 0.0310; R = 0.2510) compared with Peptostreptococcaceae (P = 0.0259; R = 0.2589), which increased with decreasing quality of life. Logistic regressions models and receiver operating characteristics curves showed that the rela- tive abundance of Actinobacteria and Peptostreptococcaceae may be useful to predict quality of life in a prese- nior population (area under the curve: 0.71). Conclusions: Quality of life may be associated with the relative abundance of certain bacteria, especially Acti- nobacteria and Peptostreptococcaceae, which may have a specific effect on certain markers and health care, which is important to improve quality of life in older populations

Active photocatalytic-superhydrophobic coating with TiO2-ZnO nano-heterostructures for lime mortars

Nano-heterostructures of TiO2-ZnO (50:50 and 10:90) were obtained by Flame Spray Pyrolisis as photocatalytic agents with expanded sensitivity towards solar light, instead of the restricted UV dependence of the pure TiO2 or ZnO. A superhydrophobic medium was simultaneously prepared and photocatalytic nanoparticles were added to obtain active coatings to be applied onto hardened surfaces of lime rendering and masonry mortars and stones. The coatings were expected to prevent the water absorption of the substrates and the subsequent degradation effects as well as to act as self-cleaning materials, reducing the dirt deposition and the biological colonization. Dispersions were applied onto the surface of lime mortars and siliceous stone. Measurements of the photocatalytic oxidation activity of the coatings were carried out by means of the NO degradation, showing a very good efficiency of the nanoparticles even at long term tests (values of NO oxidation of ca. 35 %). Water contact angle assessment evidenced a strong hydrophobization of the treated surfaces, with WCA values higher than 140°. The results proved the synergistic effect of these coatings with respect to the durability of the treated substrates

Lime-based rendering mortars with photocatalytic and hydrophobic agents: assessment of the water repellency and biocide effect

Different rendering mortars were prepared by mixing air lime and air lime-pozzolanic nanosilica with TiO2 and sodium oleate as, respectively, photocatalytic and water repellent agents, added in bulk. The aim of the work was to design and obtain new rendering mortars with improved durability focusing in the reduction of the water absorption of these materials and in their self-cleaning and biocide effect. To achieve a better distribution of the TiO2 particles, which was expected to enhance their efficiency, different dispersing agents were also incorporated to the fresh mixtures. Four diverse polycarboxylate ethers superplasticizers and a poly-naphthalene-sulfonate were tested. Workability and fluidity of the fresh rendering mortars were determined to guarantee the applicability of the final products. Water contact angle was monitored with the aim of assessing the hydrophobicity of the mortars lent by the water repeller. The biocide effect was studied by means of the culture of a strain of Pseudomonas fluorescens. The colonization of the mortars’ surface was analyzed by determining the number of colonies forming units (CFU) after several days subjecting the samples to suitable T and RH conditions. At the same time, the surface of the mortars was irradiated with solar light to activate the photocatalyst. Results showed the efficiency of the sodium oleate in reducing the water uptake of the rendering mortars. Good compatibility between the water repellent agent, the pozzolanic additive and some of the polycarboxylate superplasticizers was observed. The presence of the photocatalyst was found to be very effective in preventing microbiological colonization

Influence of two polymer-based superplasticizers (poly-naphthalene sulfonate, PNS, and lignosulfonate, LS) on compressive and flexural strength, freeze-thaw, and sulphate attack resistance of lime-metakaolin grouts

A new range of grouts prepared by air lime and metakaolin (MK) as a pozzolanic admixture has been obtained by using as dispersing agents two polymers, namely poly-naphthalene sulfonate (PNS) and lignosulfonate (LS), with the aim of improving the fluidity of the fresh grouts. Fluidity and setting times of the grouts were assessed. Differences in the molecular architecture and in the anionic charge density explained the different adsorption of the polymers and the different performance. The higher anionic charge of PNS and its linear shape explained its better adsorption and effectiveness. The pozzolanic reaction was favoured in grouts with PNS, achieving the highest values of compressive strength (4.8 MPa after 182 curing days). The addition of PNS on lime grouts slightly decreased the frost resistance of the grouts (from 24 freeze-thaw cycles for the polymer-free samples to 19 or 20 cycles with 0.5 or 1 wt % of PNS). After the magnesium sulphate attack, grouts were altered by decalcification of hydrated phases and by formation of hexahydrite and gypsum. A protective role of portlandite against magnesium sulphate attack was clearly identified. Accordingly, the polymer LS, which preserves a significant amount of Ca(OH)2, could be an alternative for the obtaining of grouts requiring high sulphate attack resistance

Hydrophobized lime grouts prepared with microsilica and superplasticizers

This work reports the obtaining of lime-based grouts as repairing materials. Microsilica was added as pozzolanic additive to enhance the compressive strength of the hardened grouts. Sodium oleate, as water repellent admixture, and different superplasticizers were also incorporated to reduce the water absorption and to enhance the injectability of the grouts. Polycarboxylate ether (PCE), polynaphthalene sulfonate (PNS), melamine sulfonate (MMS) and polyacrylic acid (PA) were tested as plasticizing agents. Regarding the fluidity of the grouts, PCE was seen to improve the injectability, followed by PNS, MMS and PA. However, PCE addition was also accompanied by a severe delay in the setting time. The other three superplasticizers did not provoke significant delays in the hardening of the samples. The water contact angle underwent an increase pointing to an effective hydrophobization of the surface as a consequence of the water repellent admixture. The combination with PCE was the most effective in keeping the water repellency in comparison with the control sample (lime grout + oleate). MMS yielded high compressive strengths and durability of the mortars, in the face of freezing-thawing cycles, was enhanced

Dietary inflammatory index and incidence of cardiovascular disease in the PREDIMED study

Previous studies have reported an association between a more pro-inflammatory diet profile and various chronic metabolic diseases. The Dietary Inflammatory Index (DII) was used to assess the inflammatory potential of nutrients and foods in the context of a dietary pattern. We prospectively examined the association between the DII and the incidence of cardiovascular disease (CVD: myocardial infarction, stroke or cardiovascular death) in the PREDIMED (Prevención con Dieta Mediterránea) study including 7216 high-risk participants. The DII was computed based on a validated 137-item food frequency questionnaire. Multivariate-adjusted hazard ratios (HR) and 95% confidence intervals of CVD risk were computed across quartiles of the DII where the lowest (most anti-inflammatory) quartile is the referent. Risk increased across the quartiles (i.e., with increasing inflammatory potential): HRquartile2 = 1.42 (95%CI = 0.97–2.09); HRquartile3 = 1.85 (1.27–2.71); and HRquartile4 = 1.73 (1.15–2.60). When fit as continuous the multiple-adjusted hazard ratio for each additional standard deviation of the DII was 1.22 (1.06–1.40). Our results provide direct prospective evidence that a pro-inflammatory diet is associated with a higher risk of cardiovascular clinical events

Novel association of the obesity risk-allele near Fas Apoptotic Inhibitory Molecule 2 (FAIM2) gene with heart rate and study of its effects on myocardial infarction in diabetic participants of the PREDIMED trial

BACKGROUND: The Fas apoptotic pathway has been implicated in type 2 diabetes and cardiovascular disease. Although a polymorphism (rs7138803; G > A) near the Fas apoptotic inhibitory molecule 2 (FAIM2) locus has been related to obesity, its association with other cardiovascular risk factors and disease remains uncertain. METHODS: We analyzed the association between the FAIM2-rs7138803 polymorphism and obesity, blood pressure and heart rate in 7,161 participants (48.3% with type 2 diabetes) in the PREDIMED study at baseline. We also explored gene-diet interactions with adherence to the Mediterranean diet (MedDiet) and examined the effects of the polymorphism on cardiovascular disease incidence per diabetes status after a median 4.8-year dietary intervention (MedDiet versus control group) follow-up. RESULTS: We replicated the association between the FAIM2-rs7138803 polymorphism and greater obesity risk (OR: 1.08; 95% CI: 1.01-1.16; P = 0.011; per-A allele). Moreover, we detected novel associations of this polymorphism with higher diastolic blood pressure (DBP) and heart rate at baseline (B = 1.07; 95% CI: 0.97-1.28 bmp in AA vs G-carriers for the whole population), that remained statistically significant even after adjustment for body mass index (P = 0.012) and correction for multiple comparisons. This association was greater and statistically significant in type-2 diabetic subjects (B = 1.44: 95% CI: 0.23-2.56 bmp; P = 0.010 for AA versus G-carriers). Likewise, these findings were also observed longitudinally over 5-year follow-up. Nevertheless, we found no statistically significant gene-diet interactions with MedDiet for this trait. On analyzing myocardial infarction risk, we detected a nominally significant (P = 0.041) association in type-2 diabetic subjects (HR: 1.86; 95% CI:1.03-3.37 for AA versus G-carriers), although this association did not remain statistically significant following correction for multiple comparisons. CONCLUSIONS: We confirmed the FAIM2-rs7138803 relationship with obesity and identified novel and consistent associations with heart rate in particular in type 2 diabetic subjects. Furthermore, our results suggest a possible association of this polymorphism with higher myocardial infarction risk in type-2 diabetic subjects, although this result needs to be replicated as it could represent a false positive