98 research outputs found

    Effect of different disinfecting procedures on the hardness and color stability of two maxillofacial elastomers over time

    Get PDF
    Objective Disinfection procedures often cause deterioration in a maxillofacial prosthesis. Color and hardness alterations could lead to a replacement of the prosthesis. Material and Methods An experimental chlorinated polyethylene (CPE) and a commercial polydimethyl siloxane (PDMS) sample were treated with four different disinfection procedures for a period which simulates 1 year of clinical service. The applied disinfection procedures included microwave exposure and immersion in three solutions, sodium hypochlorite, neutral soap and a commercial disinfecting soap. Shore A hardness (∆H) and color differences (∆E) were determined before and after each procedure. All data were analyzed by Two Way Analysis of Variance (ANOVA) and Tukey's post hoc tests at a level of α=0.05. Results The samples presented significant alterations in color and hardness after the different disinfection treatments. The color differences (∆E) were at least eye detectable in all cases and clinically unacceptable in most of the cases, with values ranging from 1.51 to 4.15 and from 1.54 to 5.92 for the PDMS and CPE material, respectively. Hardness was decreased after all the disinfection procedures in the PDMS, while for the CPE, a decrement was observed after disinfection with sodium hypochlorite and neutral soap and an increment after microwave exposure and the disinfection with a commercial antimicrobial agent. The PDMS samples presented greater alterations in color and hardness after disinfection with sodium hypochlorite solution, while the microwave exposure caused negligible effects. The CPE samples were affected most after disinfection when treated with neutral soap, and more slightly when disinfected with sodium hypochlorite solution. Conclusions The disinfection procedures caused alterations in color and hardness of the examined materials. The most suitable disinfection procedure for the PDMS material is microwave exposure, while disinfection with sodium hypochlorite solution is not recommended. The CPE material is suggested to be disinfected with sodium hypochlorite solution and the use of neutral soap is not recommended. Comparing the two materials, the PDMS material is most color stable, while the CPE material presented fewer changes in hardness

    Materials Science

    Full text link
    Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/67251/2/10.1177_00220345830620051601.pd

    Rape with Extreme Violence: The New Pathology in South Kivu, Democratic Republic of Congo

    Get PDF
    Cathy Nangini and Denis Mukwege describe their work at the Panzi Hospital in the Democratic Republic of Congo, which treats women victims of rape with extreme violence that are often perpetrated at the hands of armed groups

    Mosquito Net Use in an Artisanal East African Fishery

    Get PDF
    Widespread, anecdotal reports of the use of bed nets designed for malaria control (“mosquito nets”) in artisanal fisheries have led to concern from health and natural resource management sectors. However, mosquito net fishing (MNF) may play an important role in the livelihoods of artisanal fishers, an aspect not yet investigated. At a coastal Kenyan site among Giriama fishers, nearly half of homesteads interviewed used mosquito nets as fishing gear, targeting juvenile fish and prawns for subsistence and sale. The majority of mosquito net (MN) fishers here were men, suggesting that the assumption that MNF is a female activity is not valid in this case. However, MN use for fishing at this site is unlikely to impact malaria protection as fishers used old or surplus nets. Respondents perceived both positive aspects of MNF (e.g., food and income) and negative aspects (e.g., impact on fishery). As mosquito nets are widely available, they may enable new entrants to access fisheries. There is a critical need to review current management responses, which predominately focus on banning the practice, and instead promote integrated strategies for sustainable livelihoods

    Review of Dental Impression Materials

    Full text link
    Major advances in impression materials and their application have occurred during the last decade, with greater emphasis being placed on rubber impression materials than on dental compound, zinc oxide-eugenol, and agar and alginate. Of particular interest has been the effect of disinfection solutions on the qualities of impressions and the biocompatibility of impression materials. The principal advance in hydrocolloids has been the introduction of the agar/alginate impression technique, which has simplified the procedure and improved the quality of gypsum dies compared with those prepared in alginate impressions. The tear strength of some alginates has been improved, and some have been formulated so that the powder is dustless, thus reducing the health hazard as a result of patient inhalation of dust during the dispensing process. Polyether and silicone impression materials have been modified so that the working time, viscosity, and flexibility of the polyethers have been improved and, with the introduction of addition silicones, their accuracy has become exceptional. Although the early addition silicones liberated hydrogen after setting, thus delaying the pouring of models and dies, most addition silicones have been improved so that no hydrogen is released and dies can be poured immediately. The introduction of automatic mixing systems for addition silicones has simplified their manipulation, has reduced the number of voids in impressions, and has reduced the amount of material wasted. The incorporation of surfactants into addition silicones has made them hydrophilic, with wetting properties similar to those of polyethers, and has made pouring bubble-free gypsum dies easier. This review is confined to published and unpublished information of the past decade. It will also suggest trends that should be anticipated in the near future based on this information. The review will not present information developed before 1975, which is available in several textbooks on dental materials by Craig (1985a), Phillips (1982), and Williams and Cunningham (1979).Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/66604/2/10.1177_08959374880020012001.pd

    Sociocultural and epidemiological aspects of HIV/AIDS in Mozambique

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>A legacy of colonial rule coupled with a devastating 16-year civil war through 1992 left Mozambique economically impoverished just as the human immunodeficiency virus (HIV) epidemic swept over southern Africa in the late 1980s. The crumbling Mozambican health care system was wholly inadequate to support the need for new chronic disease services for people with the acquired immunodeficiency syndrome (AIDS).</p> <p>Methods</p> <p>To review the unique challenges faced by Mozambique as they have attempted to stem the HIV epidemic, we undertook a systematic literature review through multiple search engines (PubMed, Google Scholar™, SSRN, AnthropologyPlus, AnthroSource) using Mozambique as a required keyword. We searched for any articles that included the required keyword as well as the terms 'HIV' and/or 'AIDS', 'prevalence', 'behaviors', 'knowledge', 'attitudes', 'perceptions', 'prevention', 'gender', drugs, alcohol, and/or 'health care infrastructure'.</p> <p>Results</p> <p>UNAIDS 2008 prevalence estimates ranked Mozambique as the 8<sup>th </sup>most HIV-afflicted nation globally. In 2007, measured HIV prevalence in 36 antenatal clinic sites ranged from 3% to 35%; the national estimate of was 16%. Evidence suggests that the Mozambican HIV epidemic is characterized by a preponderance of heterosexual infections, among the world's most severe health worker shortages, relatively poor knowledge of HIV/AIDS in the general population, and lagging access to HIV preventive and therapeutic services compared to counterpart nations in southern Africa. Poor education systems, high levels of poverty and gender inequality further exacerbate HIV incidence.</p> <p>Conclusions</p> <p>Recommendations to reduce HIV incidence and AIDS mortality rates in Mozambique include: health system strengthening, rural outreach to increase testing and linkage to care, education about risk reduction and drug adherence, and partnerships with traditional healers and midwives to effect a lessening of stigma.</p
    corecore