Educação ambiental por meio do programa "Embrapa & Escola".

EVINCI. Resumo

Control of friction forces with stationary wave piezoelectric actuator

"In the field of the research on piezoelectric motors, the control of friction forces by ultrasonic waves was studied mainly from an experimental point of view [1]. The principle of friction force reduction by imposed mechanical vibrations in unlubricated contacts was recently studied in order to reduce the friction losses in an internal combustion engine with Langevin type actuators [2]. This article deals with the advantages of flexural stationary wave piezoelectric actuators in the control of the friction forces thanks to their high pressures generated at high frequencies (>10 Khz). The use of specific contact geometry which is defined by the Hertz theory associated with partial slip contact conditions, allows optimizing the lubrication effect. In the case of piezoelectric torque limiter application, the design and the numerical simulation of dedicated piezoelectric actuator are compared. In agreement with the contact modeling, the characterization of the complete actuator on mechanical test bench validates the ""torque limiter"" function and the optimization of lubrication principle with dedicated contact geometry

Control of friction forces with stationary wave piezoelectric actuator

"In the field of the research on piezoelectric motors, the control of friction forces by ultrasonic waves was studied mainly from an experimental point of view [1]. The principle of friction force reduction by imposed mechanical vibrations in unlubricated contacts was recently studied in order to reduce the friction losses in an internal combustion engine with Langevin type actuators [2]. This article deals with the advantages of flexural stationary wave piezoelectric actuators in the control of the friction forces thanks to their high pressures generated at high frequencies (>10 Khz). The use of specific contact geometry which is defined by the Hertz theory associated with partial slip contact conditions, allows optimizing the lubrication effect. In the case of piezoelectric torque limiter application, the design and the numerical simulation of dedicated piezoelectric actuator are compared. In agreement with the contact modeling, the characterization of the complete actuator on mechanical test bench validates the ""torque limiter"" function and the optimization of lubrication principle with dedicated contact geometry

On de-bunking “Fake News” in the post-truth era : how to reduce statistical error in research

The authors note with alarm that statistical noise caused by statistical incompetence is beginning to creep into research on cost overrun in public investment projects, contaminating research with work that does not meet basic standards of validity and reliability. The paper gives examples of such work and proposes three heuristics to root out the problem. First, researchers who are not statisticians, or do not have a strong background in statistics, should abstain from doing statistical analysis, and instead rely on more experienced colleagues, preferably professional statisticians. Second, journal referees should clearly state their level of statistical proficiency to journal editors, so these can set the right referee team. Finally, journal editors should make sure that at least one referee is capable of reviewing the statistical and methodological aspects of a paper. The work under review would have benefitted from observing these simple heuristics, as would any work based on statistical analysis.Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Transport and Logistic

Quasiparticle interfacial level alignment of highly hybridized frontier levels: H2_2O on TiO2_2(110)

Knowledge of the frontier levels' alignment prior to photo-irradiation is necessary to achieve a complete quantitative description of H$_2$O photocatalysis on TiO$_2$(110). Although H$_2$O on rutile TiO$_2$(110) has been thoroughly studied both experimentally and theoretically, a quantitative value for the energy of the highest H$_2$O occupied levels is still lacking. For experiment, this is due to the H$_2$O levels being obscured by hybridization with TiO$_2$(110) levels in the difference spectra obtained via ultraviolet photoemission spectroscopy (UPS). For theory, this is due to inherent difficulties in properly describing many-body effects at the H$_2$O-TiO$_2$(110) interface. Using the projected density of states (DOS) from state-of-the-art quasiparticle (QP) $G_0W_0$, we disentangle the adsorbate and surface contributions to the complex UPS spectra of H$_2$O on TiO$_2$(110). We perform this separation as a function of H$_2$O coverage and dissociation on stoichiometric and reduced surfaces. Due to hybridization with the TiO$_2$(110) surface, the H$_2$O 3a$_1$ and 1b$_1$ levels are broadened into several peaks between 5 and 1 eV below the TiO$_2$(110) valence band maximum (VBM). These peaks have both intermolecular and interfacial bonding and antibonding character. We find the highest occupied levels of H$_2$O adsorbed intact and dissociated on stoichiometric TiO$_2$(110) are 1.1 and 0.9 eV below the VBM. We also find a similar energy of 1.1 eV for the highest occupied levels of H$_2$O when adsorbed dissociatively on a bridging O vacancy of the reduced surface. In both cases, these energies are significantly higher (by 0.6 to 2.6 eV) than those estimated from UPS difference spectra, which are inconclusive in this energy region. Finally, we apply self-consistent QP$GW$ (scQP$GW$1) to obtain the ionization potential of the H$_2$O-TiO$_2$(110) interface.Comment: 12 pages, 12 figures, 1 tabl

Impact of amendments on the physical properties of soil under tropical long-term no till conditions

Tropical regions have been considered the world's primary agricultural frontier; however, some physico-chemical deficiencies, such as low soil organic matter content, poor soil structure, high erodibility, soil acidity, and aluminum toxicity, have affected their productive capacity. Lime and gypsum are commonly used to improve soil chemical fertility, but no information exists about the long-term effects of these products on the physical attributes and C protection mechanisms of highly weathered Oxisols. A field trial was conducted in a sandy clay loam (kaolinitic, thermic Typic Haplorthox) under a no-tillage system for 12 years. The trial consisted of four treatments: a control with no soil amendment application, the application of 2.1 Mg ha-1 phosphogypsum, the application of 2.0 Mg ha-1 lime, and the application of lime + phosphogypsum (2.0 + 2.1 Mg ha-1, respectively). Since the experiment was established in 2002, the rates have been applied three times (2002, 2004, and 2010). Surface liming effectively increased water-stable aggregates > 2.0 mm at a depth of up to 0.2 m; however, the association with phosphogypsum was considered a good strategy to improve the macroaggregate stability in subsoil layers (0.20 to 0.40 m). Consequently, both soil amendments applied together increased the mean weight diameter (MWD) and geometric mean diameter (GMD) in all soil layers, with increases of up to 118 and 89%, respectively, according to the soil layer. The formation and stabilization of larger aggregates contributed to a higher accumulation of total organic carbon (TOC) on these structures. In addition to TOC, the MWD and aggregate stability index were positively correlated with Ca2+ and Mg2+ levels and base saturation. Consequently, the increase observed in the aggregate size class resulted in a better organization of soil particles, increasing the macroporosity and reducing the soil bulk density and penetration resistance. Therefore, adequate soil chemical management plays a fundamental role in improving the soil's physical attributes in tropical areas under conservative management and highly affected by compaction caused by intensive farming