Curved grating fabrication techniques for concentric-circle grating, surface-emitting semiconductor lasers

We describe the fabrication and operational characteristics of a novel, surface-emitting semiconductor laser that makes use of a concentric-circle grating to both define its resonant cavity and to provide surface emission. A properly fabricated circular grating causes the laser to operate in radially inward- and outward-going circular waves in the waveguide, thus, introducing the circular symmetry needed for the laser to emit a beam with a circular cross-section. The basic circular-grating-resonator concept can be implemented in any materials system; an AlGaAs/GaAs graded-index, separate confinement heterostructure (GRINSCH), single-quantum-well (SQW) semiconductor laser, grown by molecular beam epitaxy (MBE), was used for the experiments discussed here. Each concentric-circle grating was fabricated on the surface of the AlGaAs/GaAs semiconductor laser. The circular pattern was first defined by electron-beam (e-beam) lithography in a layer of polymethylmethacrylate (PMMA) and subsequently etched into the semiconductor surface using chemically-assisted (chlorine) ion-beam etching (CAIBE). We consider issues that affect the fabrication and quality of the gratings. These issues include grating design requirements, data representation of the grating pattern, and e-beam scan method. We provide examples of how these techniques can be implemented and their impact on the resulting laser performance. A comparison is made of the results obtained using two fundamentally different electron-beam writing systems. Circular gratings with period lambda = 0.25 microns and overall diameters ranging from 80 microns to 500 microns were fabricated. We also report our successful demonstration of an optically pumped, concentric-circle grating, semiconductor laser that emits a beam with a far-field divergence angle that is less than one degree. The emission spectrum is quite narrow (less than 0.1 nm) and is centered at wavelength lambda = 0.8175 microns

Shapes, contact angles, and line tensions of droplets on cylinders

Using an interface displacement model we calculate the shapes of nanometer-size liquid droplets on homogeneous cylindrical surfaces. We determine effective contact angles and line tensions, the latter defined as excess free energies per unit length associated with the two contact lines at the ends of the droplet. The dependences of these quantities on the cylinder radius and on the volume of the droplets are analyzed.Comment: 26 pages, RevTeX, 10 Figure

Harmful Algal Blooms and their impacts on shellfish mariculture follow regionally distinct patterns of water circulation in the western English Channel during the 2018 heatwave

Harmful algal blooms (HABs) can have severe ecological, societal and economic impacts upon marine ecosystems, human health and the seafood industry. We evaluated changes in marine plankton communities with prevailing physico-chemical conditions throughout an exceptionally warm summer (2018), to elucidate key factors governing HABs and their impacts on shellfish mariculture in the western English Channel. Despite warm, stable weather conditions and widespread seasonal stratification throughout the summer, divergent plankton community compositions were observed at two rope-grown mussel (Mytilus edulis) farms (St Austell Bay and Lyme Bay) and a long-term ecological research LTER site (Plymouth L4). There were significant differences between sites in the abundances of HAB species, including Dinophysis spp. and Karenia mikimotoi, whose cell counts bloomed in excess of UK Food Standards Agency (FSA) advisory ‘trigger’ levels at Plymouth L4 and St Austell Bay, but not at the Lyme Bay site. The K. mikimotoi bloom occurred over two weeks in August and comprised up to 88% of the standing phytoplankton biomass in St Austell Bay. Dinophysis spp. also bloomed here from May to September, constituting up to 28% of phytoplankton biomass. This protracted bloom resulted in concentrations of Dinophysis toxins 1 & 2 and pectenotoxins and okadaic acid in shellfish, which closed shellfish harvesting operations on farms located in St Austell Bay, and other shellfish sites in the west of the western English Channel (but not in the east of the region). Inter-site differences in the abundances of these and other HAB species were associated with variations in water circulation and co-occurring phytoplankton and zooplankton communities. Furthermore, plankton monitoring data obtained from the L4 site over the past 3 decades showed HAB species (including Dinophysis spp.) with abundances commonly occurring above advisory trigger levels during warmer periods, such as that coinciding with our study. Under projected climate warming these blooms are likely to continue to be governed by regionally distinct patterns of water circulation, which need to be taken into account in marine spatial planning, when assessing the suitability of new shellfish mariculture site

The bactericidal effect of dendritic copper microparticles, contained in an alginate matrix, on Escherichia coli.

Although the bactericidal effect of copper has been known for centuries, there is a current resurgence of interest in the use of this element as an antimicrobial agent. During this study the use of dendritic copper microparticles embedded in an alginate matrix as a rapid method for the deactivation of Escherichia coli ATCC 11775 was investigated. The copper/alginate produced a decrease in the minimum inhibitory concentration from free copper powder dispersed in the media from 0.25 to 0.065 mg/ml. Beads loaded with 4% Cu deactivated 99.97% of bacteria after 90 minutes, compared to a 44.2% reduction in viability in the equivalent free copper powder treatment. There was no observed loss in the efficacy of this method with increasing bacterial loading up to 10(6) cells/ml, however only 88.2% of E. coli were deactivated after 90 minutes at a loading of 10(8) cells/ml. The efficacy of this method was highly dependent on the oxygen content of the media, with a 4.01% increase in viable bacteria observed under anoxic conditions compared to a >99% reduction in bacterial viability in oxygen tensions above 50% of saturation. Scanning electron micrographs (SEM) of the beads indicated that the dendritic copper particles sit as discrete clusters within a layered alginate matrix, and that the external surface of the beads has a scale-like appearance with dendritic copper particles extruding. E. coli cells visualised using SEM indicated a loss of cellular integrity upon Cu bead treatment with obvious visible blebbing. This study indicates the use of microscale dendritic particles of Cu embedded in an alginate matrix to effectively deactivate E. coli cells and opens the possibility of their application within effective water treatment processes, especially in high particulate waste streams where conventional methods, such as UV treatment or chlorination, are ineffective or inappropriate

High-Frequency (>100 GHz) and High-Speed (<1 ps) Electronic Devices

Contains an introduction, reports on three research projects and a list of publications.Advanced Research Projects Agency Contract MDA972-90-C-0021National Aeronautics and Space Administration Grant NAG2-693National Aeronautics and Space Administration Contract 959705National Science Foundation/MRSEC Grant DMR 94-00334MIT Lincoln Laboratory Advanced Concept Program Contract BX-5464MIT Research Laboratory of Electronics Postdoctoral FellowshipRome Air Force Laboratory Graduate FellowshipU.S. Army Research Office Grant DAAL03-92-G-0251Hertz Foundation FellowshipU.S. Army Research Office/ASSERT Grant DAAH04-94-G-016

Poloxamer-based thermoresponsive ketorolac tromethamine in situ gel preparations : design, characterisation, toxicity and transcorneal permeation studies

This study was aimed at preparing, characterising and evaluating in situ gel formulations based on a blend of two hydrophilic polymers i.e. poloxamer 407 (P407) and poloxamer 188 (P188) for a sustained ocular delivery of ketorolac tromethamine (KT). Drug-polymer interaction studies were performed using {DSC} and FT-IR. The gelation temperature (Tsol-gel), gelation time, rheological behaviour, mucoadhesive characteristics of these gels, transcorneal permeation and ocular irritation as well as toxicity was investigated. {DSC} and FT-IR studies revealed that there may be electrostatic interactions between the drug and the polymers used. {P188} modified the Tsol/gel of {P407} bringing it close to eye temperature (35°C) compared with the formulation containing {P407} alone. Moreover, gels that comprised {P407} and {P188} exhibited a pseudoplastic behaviour at different concentrations. Furthermore, mucoadhesion study using mucin discs showed that in situ gel formulations have good mucoadhesive characteristics upon increasing the concentration of P407. When comparing formulations {PP11} and PP12, the work of adhesion decreased significantly (P &lt; 0.001) from 377.9 ± 7.79 mN.mm to 272.3 ± 6.11 mN.mm. In vitro release and ex vivo permeation experiments indicated that the in situ gels were able to prolong and control {KT} release as only 48 of the {KT} released within 12 h. In addition, the HET-CAM and {BCOP} tests confirmed the non-irritancy of {KT} loaded in situ gels, and HET-CAM test demonstrated the ability of ocular protection against strongly irritant substances. {MTT} assay on primary corneal epithelial cells revealed that in situ gel formulations loaded with {KT} showed reasonable and acceptable percent cell viability compared with control samples

Real patient learning integrated in a preclinical block musculoskeletal disorders. Does it make a difference?

Although musculoskeletal disorders are the most common reason for general practitioner visits, training did not keep pace. Implementation of learning from patients with rheumatologic disorders linked together with the teaching of theoretical knowledge in the preclinical medical education might be an important step forward in the improvement of quality of care for these patients. The Leiden Medical School curriculum has implemented two non-obligatory real patient learning (RPL) practicals integrated within the preclinical block musculoskeletal disorders. This study investigates the educational effectiveness of the practicals, the expectations students have of RPL, and students’ satisfaction. Participants’ grades on the end-of-block test served as the test results of the educational effectiveness of the practicals and were compared with those of the non-participants. Qualitative data was collected by means of questionnaires generated by focus groups. The participants in practicals scored significantly higher at the end-of-block test. The expected effects of the contact with real patients concerned positive effects on cognition and skills. ‘Contextualizing of the theory’, ‘better memorizing of clinical pictures’, and ‘understanding of the impact of the disease’ were the most frequently mentioned effects of the practicals. Overall, the participants were (very) enthusiastic about this educational format. The RPL practicals integrated within a preclinical block musculoskeletal disorders are a valuable addition to the Leiden medical curriculum. This relatively limited intervention exhibits a strong effect on students’ performance in tests. Future research should be directed towards the long-term effects of this intervention

Pain relief in labour: a qualitative study to determine how to support women to make decisions about pain relief in labour

Background Engagement in decision making is a key priority of modern healthcare. Women are encouraged to make decisions about pain relief in labour in the ante-natal period based upon their expectations of what labour pain will be like. Many women find this planning difficult. The aim of this qualitative study was to explore how women can be better supported in preparing for, and making, decisions during pregnancy and labour regarding pain management. Methods Semi-structured interviews were conducted with 13 primiparous and 10 multiparous women at 36 weeks of pregnancy and again within six weeks postnatally. Data collection and analysis occurred concurrently to identify key themes. Results Three main themes emerged from the data. Firstly, during pregnancy women expressed a degree of uncertainty about the level of pain they would experience in labour and the effect of different methods of pain relief. Secondly, women reflected on how decisions had been made regarding pain management in labour and the degree to which they had felt comfortable making these decisions. Finally, women discussed their perceived levels of control, both desired and experienced, over both their bodies and the decisions they were making. Conclusion This study suggests that the current approach of antenatal preparation in the NHS, of asking women to make decisions antenatally for pain relief in labour, needs reviewing. It would be more beneficial to concentrate efforts on better informing women and on engaging them in discussions around their values, expectations and preferences and how these affect each specific choice rather than expecting them to make to make firm decisions in advance of such an unpredictable event as labour