Measurements of Pilot Time Delay as Influenced by Controller Characteristics and Vehicles Time Delays

A study to measure and compare pilot time delay when using a space shuttle rotational hand controller and a more conventional control stick was conducted at NASA Ames Research Center's Dryden Flight Research Facility. The space shuttle controller has a palm pivot in the pitch axis. The more conventional controller used was a general-purpose engineering simulator stick that has a pivot length between that of a typical aircraft center stick and a sidestick. Measurements of the pilot's effective time delay were obtained through a first-order, closed-loop, compensatory tracking task in pitch. The tasks were implemented through a space shuttle cockpit simulator and a critical task tester device. The study consisted of 450 data runs with four test pilots and one nonpilot, and used three control stick configurations and two system delays. Results showed that the heavier conventional stick had the lowest pilot effective time delays associated with it, whereas the shuttle and light conventional sticks each had similar higher pilot time delay characteristics. It was also determined that each control stick showed an increase in pilot time delay when the total system delay was increased

Dynamic Identification as a Tool to Constrain Numerical Models for Structural Analysis of Historical Buildings

Operational modal analysis (OMA), also known as output-only or ambient vibration test (AVT), has become in last decades a powerful approach for a wide range of applications in the field of civil engineering. When historical structures are investigated this approach is particularly appealing avoiding shaking the structure artificially. This paper discusses the assessment of the dynamic behavior of the Baptistery of San Giovanni in Firenze (Italy). Based on experimental results obtained through a temporary network of seismic sensors, the enhanced frequency domain decomposition (EFDD) technique is employed to evaluate frequencies and mode shapes. These modal parameters are subsequently used to calibrate a 3D finite element (FE) model of the Baptistery. Genetic algorithm (GA) technique is employed for calibration, thus allowing to obtain an accurate and robust numerical model. To verify the effects introduced by the number of identified modal parameters on the model updating procedure several analyses are in addition performed. This paper, providing an illustrative case study in the field of health monitoring of monumental structures, confirms that the OMA technique is able to derive effective information on the dynamic behavior of historical buildings, which in turn is useful to tune reliable and robust numerical models to be employed for structural analysis

Are sleep problems related to psychological distress in healthy aging during the covid-19 pandemic? A review

The SARS-CoV-2 pandemic, characterized by home confinement and other restrictive measures to reduce the spread of the infection, led to significant changes in people’s habits and lifestyle. One of the most common problems is the worsening of sleep quality or quantity, which could have negative effects on psychological wellbeing, particularly in older adults. The purposes of the present literature review considering healthy aging subjects are (a) to examine the existing research on sleep alterations during the current pandemic and (b) to highlight possible relationships between sleep problems and psychological distress. A systematic search strategy was implemented according to PRISMA guidelines in the international literature online databases, up to 1 July 2021. After identification and screening phases, 11 articles were included in this review. The studies found possible associations between sleep problems and mood changes—particularly in terms of depression and anxiety. In addition, altered sleep patterns seemed to be related to changes in individual aspects, lifestyle, and attitudes adopted by older adults during the COVID-19 lockdown. Thus, the pandemic could affect the sleep and psychological wellbeing of the older population, even in healthy aging

Complete (k,3)-arcs from quartic curves

Complete (Formula presented.) -arcs in projective planes over finite fields are the geometric counterpart of linear non-extendible Near MDS codes of length (Formula presented.) and dimension (Formula presented.). A class of infinite families of complete (Formula presented.) -arcs in (Formula presented.) is constructed, for (Formula presented.) a power of an odd prime (Formula presented.). The order of magnitude of (Formula presented.) is smaller than (Formula presented.). This property significantly distinguishes the complete (Formula presented.) -arcs of this paper from the previously known infinite families, whose size differs from (Formula presented.) by at most (Formula presented.)

Analytical and numerical seismic assessment of heritage masonry towers

Abstract The new Italian building code, published in 2018 [MIT in NTC 2018: D.M. del Ministero delle Infrastrutture e dei trasporti del 17/01/2018. Aggiornamento delle Norme Tecniche per le Costruzioni (in Italian), 2018], explicitly refers to the Italian “Guidelines for the assessment and mitigation of the seismic risk of the cultural heritage” [PCM in DPCM 2011: Direttiva del Presidente del Consiglio dei Ministri per valutazione e riduzione del rischio sismico del patrimonio culturale con riferimento alle norme tecniche per le costruzioni, G.U. n. 47 (in Italian), 2011] as a reliable source of guidance that can be employed for the vulnerability assessment of heritage buildings under seismic loads. According to these guidelines, three evaluation levels are introduced to analyse and assess the seismic capacity of historic masonry structures, namely: (1) simplified global static analyses; (2) kinematic analyses based on local collapse mechanisms, (3) detailed global analyses. Because of the complexity and the large variety of existing masonry typologies, which makes it particularly problematic to adopt a unique procedure for all existing structures, the guidelines provide different simplified analysis approaches for different structural configurations, e.g. churches, palaces, towers. Among the existing typologies of masonry structures there considered, this work aims to deepen validity, effectiveness and scope of application of the Italian guidelines with respect to heritage masonry towers. The three evaluation levels proposed by the guidelines are here compared by discussing the seismic risk assessment of a representative masonry tower: the Cugnanesi tower located in San Gimignano (Italy). The results show that global failure modes due to local stress concentrations cannot be identified if only simplified static and kinematic analyses are performed. Detailed global analyses are in fact generally needed for a reliable prediction of the seismic performance of such structures.</jats:p

Study of RPC gas mixtures for the ARGO-YBJ experiment

The ARGO-YBJ experiment consists of a RPC carpet to be operated at the Yangbajing laboratory (Tibet, P.R. China), 4300 m a.s.l., and devoted to the detection of showers initiated by photon primaries in the energy range 100 GeV - 20 TeV. The measurement technique, namely the timing on the shower front with a few tens of particles, requires RPC operation with 1 ns time resolution, low strip multiplicity, high efficiency and low single counting rate. We have tested RPCs with many gas mixtures, at sea level, in order to optimize these parameters. The results of this study are reported.Comment: 6 pages, 3 figures. To be published in Nucl. Instr. Meth. A, talk given at the "5th International Workshop on RPCs and Related Detectors", Bari (Italy) 199

Grading evolution of an artificial granular material from medium to high stress under one-dimensional compression

This contribution presents the results of an experimental investigation of the mechanical behaviour of granular materials with crushable grains under one-dimensional compression at medium to high stress. The material used for the experimental work is a Light Expanded Clay Aggregate (LECA) whose grains break at relatively low stress. Reconstituted samples were prepared with different initial grain size distributions and their evolution observed under one-dimensional compression. The grain size distributions before and after testing were used to calibrate a bimodal model obtained from the superposition of two Weibull functions. The observed evolution of the micro and macro diameters on loading are linked to the characteristics of the one-dimensional compressibility curve obtained under displacement controlled conditions, such as its shape and two characteristic stress values, namely the pre-consolidation stress and the stress corresponding to the point of inflection

Impact of Dietary Fiber on Inflammation and Insulin Resistance in Older Patients: A Narrative Review

The beneficial impact of dietary fiber on the prevention and management of several chronic conditions associated with aging, including diabetes, neurodegenerative, cardiovascular diseases, and cancer, is well-known. High fiber intake has been associated with reduced inflammatory mediators counteracting the low-grade chronic inflammation typical of older age. In addition, dietary fiber improves postprandial glucose response and insulin resistance. In contrast, during acute diseases, its effects on insulin resistance and modulation of immune response are unclear. The aim of this narrative is to summarize the evidence for the potential impact of dietary fiber on inflammation and insulin resistance in older adults, with a particular focus on those acutely ill. Available evidence suggests that dietary fiber has the potential to counteract acute inflammation and to improve metabolic health. In addition, modulation of gut microbiota composition may contribute to improved immune function, particularly in the setting of aging-associated dysbiosis. This phenomenon has relevant implications in those acutely ill, in whom dysbiosis can be exacerbated. Our review leads to the conclusion that dietary interventions based on fiber manipulation could exploit its beneficial effects on inflammation and insulin resistance, if conducted from a precision nutrition perspective. This could also be true for the acutely ill patient, even though strong evidence is lacking