T Dependence of the Mechanical Properties on the Microstructural Parameters of WC-Co

Abstract The effect of binder content and WC grain size on the mechanical properties is widely investigated in literature. An increase in binder amount and WC grain size leads to a decrease in hardness and an increase in fracture toughness. Actually, these correlations are related to the influence of binder content and WC grain size through the contiguity and mean binder free path, which are the microstructural parameters that affect the mechanical properties. The aim of this study is to verify the dependence of the two microstructural parameters that govern the WCCo mechanical behaviour, namely the contiguity and mean binder free path, on the mechanical properties of an extended range of WC-Co samples, which differ in terms of Co content and tungsten carbide grain size

Electrophoretic Deposition of WS2 Flakes on Nanoholes Arrays—Role of Used Suspension Medium

Here we optimized the electrophoretic deposition process for the fabrication of WS2 plasmonic nanohole integrated structures. We showed how the conditions used for site-selective deposition influenced the properties of the deposited flakes. In particular, we investigated the effect of different suspension buffers used during the deposition both in the efficiency of the process and in the stability of WS2 flakes, which were deposited on an ordered arrays of plasmonic nanostructures. We observed that a proper buffer can significantly facilitate the deposition process, keeping the material stable with respect to oxidation and contamination. Moreover, the integrated plasmonic structures that can be prepared with this process can be applied to enhanced spectroscopies and for the preparation of 2D nanopores

Simbol-X Hard X-ray Focusing Mirrors: Results Obtained During the Phase A Study

Simbol-X will push grazing incidence imaging up to 80 keV, providing a strong improvement both in sensitivity and angular resolution compared to all instruments that have operated so far above 10 keV. The superb hard X-ray imaging capability will be guaranteed by a mirror module of 100 electroformed Nickel shells with a multilayer reflecting coating. Here we will describe the technogical development and solutions adopted for the fabrication of the mirror module, that must guarantee an Half Energy Width (HEW) better than 20 arcsec from 0.5 up to 30 keV and a goal of 40 arcsec at 60 keV. During the phase A, terminated at the end of 2008, we have developed three engineering models with two, two and three shells, respectively. The most critical aspects in the development of the Simbol-X mirrors are i) the production of the 100 mandrels with very good surface quality within the timeline of the mission; ii) the replication of shells that must be very thin (a factor of 2 thinner than those of XMM-Newton) and still have very good image quality up to 80 keV; iii) the development of an integration process that allows us to integrate these very thin mirrors maintaining their intrinsic good image quality. The Phase A study has shown that we can fabricate the mandrels with the needed quality and that we have developed a valid integration process. The shells that we have produced so far have a quite good image quality, e.g. HEW <~30 arcsec at 30 keV, and effective area. However, we still need to make some improvements to reach the requirements. We will briefly present these results and discuss the possible improvements that we will investigate during phase B.Comment: 6 pages, 3 figures, invited talk at the conference "2nd International Simbol-X Symposium", Paris, 2-5 december, 200

Bio-Assisted Tailored Synthesis of Plasmonic Silver Nanorings and Site-Selective Deposition on Graphene Arrays

The spontaneous interaction between noble metals and biological scaffolds enables simple and cost-effective synthesis of nanomaterials with unique features. Here, plasmonic silver nanorings are synthesized on a ring-like protein, i.e., a peroxiredoxin (PRX), and used to assemble large arrays of functional nanostructures. The PRX drives the seeding growth of metal silver under wet reducing conditions, yielding nanorings with outer and inner diameters down to 28 and 3 nm, respectively. The obtained hybrid nanostructures are selectively deposited onto a solid-state 2D membrane made of graphene in order to prepare plasmonic nanopores. In particular, the interaction between the graphene and the PRX allows for the simple preparation of ordered arrays of plasmonic nanorings on a 2D-material membrane. This fabrication process can be finalized by drilling a nanometer scale pore in the middle of the ring. Fluorescence spectroscopic measurements in combination with numerical simulations demonstrate the plasmonic effects induced in the metallic nanoring cavity. The prepared nanopores represent one of the first examples of hybrid plasmonic nanopore structures integrated on a 2D-material membrane. The diameter of the nanopore and the atomically thick substrate make this proof-of-concept approach particularly interesting for nanopore-based technologies and applications such as next-generation sequencing and single-molecule detection

Drusen-like Deposits in Young Adults Diagnosed with Systemic Lupus Erythematosus

PURPOSE: To determine the prevalence of drusen-like deposits (DLDs) and choroidal changes in patients with Systemic Lupus Erythematosus (SLE), with or without glomerulonephritis. To correlate ocular findings with systemic features. DESIGN: Case-control study METHODS: Sixty patients with SLE (18-55 years; 30 with and 30 without SLE-related glomerulonephritis) and 60 age and gender matched healthy controls were enrolled. All patients underwent non-invasive, multimodal imaging that included fundus photography, near-infrared reflectance, blue autofluorescence, blue reflectance, and spectral-domain optical coherence tomography (SD-OCT). Images were analyzed for the prevalence of DLDs. Distribution, size, and number of DLDs were measured. Correlations between ocular findings and systemic features were analyzed. Subfoveal choroidal thickness (SCT) was measured using the SD-OCT. RESULTS: Drusen-like deposits were detected in 40% of SLE subjects and 3.33% of controls (P3 quadrants (P<0.001, P=0.03, P=0.009, respectively). Subfoveal choroidal thickness was greater in patients with SLE (P=0.002). CONCLUSIONS: Drusen-like deposits in patients with SLE were independent of renal disease and were best detected with SD-OCT. Lupus-related glomerulonephritis was associated with more fundus abnormalities and a screening SD-OCT should be considered in all patients with SLE. Drusen like deposits in the absence of glomerulonephritis may support the recent proposal that complement alteration is the primary cause for these lesions

Hybrid Metal-Dielectric Plasmonic Zero Mode Waveguide for Enhanced Single Molecule Detection

We fabricated hybrid metal-dielectric nanoantennas and measured their optical response at three different wavelengths. The nanostructure is fabricated on a bilayer film formed by the sequential deposition of silicon and gold on a transparent substrate. The optical characterization is done via fluorescence measurements. We characterized the fluorescence enhancement, as well as the lifetime and detection volume reduction for each wavelength. We observe that the hybrid metal-dielectric nanoantennas behave as enhanced Zero Mode Waveguides in the near-infrared spectral region. Their detection volume is such that they can perform enhanced single-molecule detection at tens of microM. However, a wavelength blue-shift of 40 nm dramatically decreases the performance of the nanoantennas. We compared their behavior with that of a golden ZMW, and we verified that the dielectric silicon layer improves the design. We interpreted the experimental observations with the help of numerical simulations. In addition, the simulations showed that the field enhancement of the structure highly depends on the incoming beam: tightly focused beams yield lower field enhancements than plane-waves

Mirrors for space telescopes: degradation issues

Mirrors are a subset of optical components essential for the success of current and future space missions. Most of the telescopes for space programs ranging from Earth Observation to Astrophysics and covering all the electromagnetic spectrum from X-rays to Far-Infrared are based on reflective optics. Mirrors operate in diverse and harsh environments that range from Low-Earth Orbit, to interplanetary orbits and the deep space. The operational life of space observatories spans from minutes (sounding rockets) to decades (large observatories), and the performance of the mirrors within the optical system is susceptible to degrade, which results in a transient optical efficiency of the instrument. The degradation that occurs in space environments depends on the operational life on the orbital properties of the space mission, and it reduces the total system throughput and hence compromises the science return. Therefore, the knowledge of potential degradation physical mechanisms, how they affect mirror performance, and how to prevent it, is of paramount importance to ensure the long-term success of space telescopes. In this review we report an overview on current mirror technology for space missions with a particular focus on the importance of degradation and radiation resistance of the coating materials. Particular detail will be given to degradation effects on mirrors for the far and extreme UV as in these ranges the degradation is enhanced by the strong absorption of most contaminants

Emerging Approaches to DNA Data Storage: Challenges and Prospects

With the total amount of worldwide data skyrocketing, the global data storage demand is predicted to grow to 1.75 × 1014GB by 2025. Traditional storage methods have difficulties keeping pace given that current storage media have a maximum density of 103GB/mm3. As such, data production will far exceed the capacity of currently available storage methods. The costs of maintaining and transferring data, as well as the limited lifespans and significant data losses associated with current technologies also demand advanced solutions for information storage. Nature offers a powerful alternative through the storage of information that defines living organisms in unique orders of four bases (A, T, C, G) located in molecules called deoxyribonucleic acid (DNA). DNA molecules as information carriers have many advantages over traditional storage media. Their high storage density, potentially low maintenance cost, ease of synthesis, and chemical modification make them an ideal alternative for information storage. To this end, rapid progress has been made over the past decade by exploiting user-defined DNA materials to encode information. In this review, we discuss the most recent advances of DNA-based data storage with a major focus on the challenges that remain in this promising field, including the current intrinsic low speed in data writing and reading and the high cost per byte stored. Alternatively, data storage relying on DNA nanostructures (as opposed to DNA sequence) as well as on other combinations of nanomaterials and biomolecules are proposed with promising technological and economic advantages. In summarizing the advances that have been made and underlining the challenges that remain, we provide a roadmap for the ongoing research in this rapidly growing field, which will enable the development of technological solutions to the global demand for superior storage methodologies