42,743 research outputs found
Hypersonic cruise aircraft propulsion integration study, volume 1
A hypersonic cruise transport conceptual design is described. The integration of the subsonic, supersonic, and hypersonic propulsion systems with the aerodynamic design of the airframe is emphasized. An evaluation of various configurations of aircraft and propulsion integration concepts, and selection and refinement of a final design are given. This configuration was used as a baseline to compare two propulsion concepts - one using a fixed geometry dual combustion mode scramjet and the other a variable geometry ramjet engine. Both concepts used turbojet engines for takeoff, landing and acceleration to supersonic speed
Study of active cooling for supersonic transports
The potential benefits of using the fuel heat sink of hydrogen fueled supersonic transports for cooling large portions of the aircraft wing and fuselage are examined. The heat transfer would be accomplished by using an intermediate fluid such as an ethylene glycol-water solution. Some of the advantages of the system are: (1) reduced costs by using aluminum in place of titanium, (2) reduced cabin heat loads, and (3) more favorable environmental conditions for the aircraft systems. A liquid hydrogen fueled, Mach 2.7 supersonic transport aircraft design was used for the reference uncooled vehicle. The cooled aircraft designs were analyzed to determine their heat sink capability, the extent and location of feasible cooled surfaces, and the coolant passage size and spacing
Minimum energy, liquid hydrogen supersonic cruise vehicle study
The potential was examined of hydrogen-fueled supersonic vehicles designed for cruise at Mach 2.7 and at Mach 2.2. The aerodynamic, weight, and propulsion characteristics of a previously established design of a LH2 fueled, Mach 2.7 supersonic cruise vehicle (SCV) were critically reviewed and updated. The design of a Mach 2.2 SCV was established on a corresponding basis. These baseline designs were then studied to determine the potential of minimizing energy expenditure in performing their design mission, and to explore the effect of fuel price and noise restriction on their design and operating performance. The baseline designs of LH2 fueled aircraft were than compared with equivalent designs of jet A (conventional hydrocarbon) fueled SCV's. Use of liquid hydrogen for fuel for the subject aircraft provides significant advantages in performance, cost, noise, pollution, sonic boom, and energy utilization
Study of LH2 fueled subsonic passenger transport aircraft
The potential of using liquid hydrogen as fuel in subsonic transport aircraft was investigated to explore an expanded matrix of passenger aircraft sizes. Aircraft capable of carrying 130 passengers 2,780 km (1500 n.mi.); 200 passengers 5,560 km (3000 n.mi.); and 400 passengers on a 9,265 km (5000 n.mi.) radius mission, were designed parametrically. Both liquid hydrogen and conventionally fueled versions were generated for each payload/range in order that comparisons could be made. Aircraft in each mission category were compared on the basis of weight, size, cost, energy utilization, and noise
Angle-of-attack analysis of a spinning slender cone with slight aerodynamic and mass asymmetries /reentry F/
Angle of attack analysis of spinning slender reentry cone with slight aerodynamic and mass asymmetrie
Investigation of conventional and Super-X divertor configurations of MAST Upgrade using SOLPS
One of the first studies of MAST Upgrade divertor configurations with
SOLPS5.0 are presented. We focus on understanding main prospects associated
with the novel geometry of the Super-X divertor (SXD). This includes a
discussion of the effect of magnetic flux expansion and volumetric power losses
on the reduction of target power loads, the effect of divertor geometry on the
divertor closure and distribution of neutral species and radiation in the
divertor, the role of the connection length in broadening the target wetted
area. A comparison in conditions typical for MAST inter-ELM H-mode plasmas
confirms improved performance of the Super-X topology resulting in
significantly better divertor closure with respect to neutrals (the atomic flux
from the target increased by a factor of 6, but the atomic flux from the
divertor to the upper SOL reduced by a factor of 2), increased radiation volume
and increased total power loss (a factor of 2) and a reduction of target power
loads through both magnetic flux expansion and larger volumetric power loss in
the divertor (a factor of 5-10 in attached plasmas). The reduction of the
target power load by SXD further increases with collisionality (high density or
detached regimes) thanks to larger importance of volumetric power losses. It is
found that a cold divertor plasma leads to stronger parallel temperature
gradients in the SOL which drive more parallel heat flux, meaning that the
effectiveness of perpendicular transport in spreading the power at the target
can be reduced, and this needs to be taken into account in any optimisation.Comment: 32 pages, 23 figures. This is an author-created, un-copyedited
version of an article accepted for publication in PPCF. IOP Publishing Ltd
and IAEA are not responsible for any errors or omissions in this version of
the manuscript or any version derived from i
Operating experiences of retardant bombers during firefighting operations
Data are presented on operational practices and maneuver accelerations experienced by two Douglas DC-6B airplanes converted to retardant bombers and used in firefighting operations. The data cover two fire seasons in the mountainous regions of the northwestern United States
Lewis Research Center spin rig and its use in vibration analysis of rotating systems
The Lewis Research Center spin rig was constructed to provide experimental evaluation of analysis methods developed under the NASA Engine Structural Dynamics Program. Rotors up to 51 cm (20 in.) in diameter can be spun to 16,000 rpm in vacuum by an air motor. Vibration forcing functions are provided by shakers that apply oscillatory axial forces or transverse moments to the shaft, by a natural whirling of the shaft, and by an air jet. Blade vibration is detected by strain gages and optical blade-tip motion sensors. A variety of analogy and digital processing equipment is used to display and analyze the signals. Results obtained from two rotors are discussed. A 56-blade compressor disk was used to check proper operation of the entire spin rig system. A special two-blade rotor was designed and used to hold flat and twisted plates at various setting and sweep angles. Accurate Southwell coefficients have been obtained for several modes of a flat plate oriented parallel to the plane of rotation
Strong coupling of magnons in a YIG sphere to photons in a planar superconducting resonator in the quantum limit
We report measurements of a superconducting coplanar waveguide resonator
(CPWR) coupled to a sphere of yttrium-iron garnet. The non-uniform CPWR field
allows us to excite various magnon modes in the sphere. Mode frequencies and
relative coupling strengths are consistent with theory. Strong coupling is
observed to several modes even with, on average, less than one excitation
present in the CPWR. The time response to square pulses shows oscillations at
the mode splitting frequency. These results indicate the feasibility of
combining magnonic and planar superconducting quantum devices.Comment: 5 pages, 4 figure
Performance of high-altitude, long-endurance, turboprop airplanes using conventional or cryogenic fuels
An analytical study has been conducted to evaluate the potential endurance of remotely piloted, low speed, high altitude, long endurance airplanes designed with 1990 technology. The baseline configuration was a propeller driven, sailplane like airplane powered by turbine engines that used JP-7, liquid methane, or liquid hydrogen as fuel. Endurance was measured as the time spent between 60,000 feet and an engine limited maximum altitude of 70,000 feet. Performance was calculated for a baseline vehicle and for configurations derived by varying aerodynamic, structural or propulsion parameters. Endurance is maximized by reducing wing loading and engine size. The level of maximum endurance for a given wing loading is virtually the same for all three fuels. Constraints due to winds aloft and propulsion system scaling produce maximum endurance values of 71 hours for JP-7 fuel, 70 hours for liquid methane, and 65 hours for liquid hydrogen. Endurance is shown to be strongly effected by structural weight fraction, specific fuel consumption, and fuel load. Listings of the computer program used in this study and sample cases are included in the report
- …