721 research outputs found
Extremely large scale simulation of a Kardar-Parisi-Zhang model using graphics cards
The octahedron model introduced recently has been implemented onto graphics
cards, which permits extremely large scale simulations via binary lattice gases
and bit coded algorithms. We confirm scaling behaviour belonging to the 2d
Kardar-Parisi-Zhang universality class and find a surface growth exponent:
beta=0.2415(15) on 2^17 x 2^17 systems, ruling out beta=1/4 suggested by field
theory. The maximum speed-up with respect to a single CPU is 240. The steady
state has been analysed by finite size scaling and a growth exponent
alpha=0.393(4) is found. Correction to scaling exponents are computed and the
power-spectrum density of the steady state is determined. We calculate the
universal scaling functions, cumulants and show that the limit distribution can
be obtained by the sizes considered. We provide numerical fitting for the small
and large tail behaviour of the steady state scaling function of the interface
width.Comment: 7 pages, 8 figures, slightly modified, accepted version for PR
Community Policing: Broken Windows, Community Building, and Satisfaction with the Police
The concept of community policing dominates the law enforcement profession today. One would be hard pressed to find an advertisement for a police chief’s position that does not require a thorough understanding of this method of policing. Like the Kansas City preventive patrol experiment and the Rand report on the criminal investigation process, the call for community policing has led to dramatic changes in the way that police carry out their responsibilities. In spite of its popularity, there have been a number of challenges to community policing from social scientists who are particularly concerned about the ‘broken windows’ model of policing. These challenges have not been received well by the law enforcement community, which argues that sociologists are wedded to the idea that crime is caused by the structural features of capitalist society, including economic injustice, racism, and poverty. The purpose of this article is to bridge the gap between these two positions. Yes, there is a place for community policing, and, yes, social problems do contribute to crime. The article starts by reviewing the development of community policing in the United States. An analysis of the theoretical constructs that support community policing then follows. Finally, we argue that there is sound theoretical evidence to support community policing, particularly those programmes that improve citizen satisfaction with the manner in which police carry out their responsibilities
A Mechanism to Produce the Small Dust Observed in Protoplanetary Disks
Small (sub)-micron dust is present over the entire lifetime of protoplanetary
disks. As aggregation readily depletes small particles, one explanation might
be that dust is continuously generated by larger bodies in the midplane and
transported to the surface of the disks. In general, in a first step of this
scenario, the larger bodies have to be destroyed again and different mechanisms
exist with the potential to accomplish this. Possible destructive mechanisms
are fragmentation in collisions, erosion by gas drag or light induced erosion.
In laboratory experiments we find that the latter, light induced erosion by
Knudsen compression and photophoresis, can provide small particles. It might be
a preferred candidate as the dust is released into a low particle density
region. The working principle of this mechanism prevents or decreases the
likelihood for instant re-accretion or re-growth of large dense aggregates.
Provided that there is a particle lift, e.g. turbulence, these particles might
readily reach the surface of the disk.Comment: 7 pages, 6 figure
Crossing barriers in planetesimal formation: The growth of mm-dust aggregates with large constituent grains
Collisions of mm-size dust aggregates play a crucial role in the early phases
of planet formation. We developed a laboratory setup to observe collisions of
dust aggregates levitating at mbar pressures and elevated temperatures of 800
K. We report on collisions between basalt dust aggregates of from 0.3 to 5 mm
in size at velocities between 0.1 and 15 cm/s. Individual grains are smaller
than 25 \mum in size. We find that for all impact energies in the studied range
sticking occurs at a probability of 32.1 \pm 2.5% on average. In general, the
sticking probability decreases with increasing impact parameter. The sticking
probability increases with energy density (impact energy per contact area). We
also observe collisions of aggregates that were formed by a previous sticking
of two larger aggregates. Partners of these aggregates can be detached by a
second collision with a probability of on average 19.8 \pm 4.0%. The measured
accretion efficiencies are remarkably high compared to other experimental
results. We attribute this to the rel. large dust grains used in our
experiments, which make aggregates more susceptible to restructuring and energy
dissipation. Collisional hardening by compaction might not occur as the
aggregates are already very compact with only 54 \pm 1% porosity. The
disassembly of previously grown aggregates in collisions might stall further
aggregate growth. However, owing to the levitation technique and the limited
data statistics, no conclusive statement about this aspect can yet be given. We
find that the detachment efficiency decreases with increasing velocities and
accretion dominates in the higher velocity range. For high accretion
efficiencies, our experiments suggest that continued growth in the mm-range
with larger constituent grains would be a viable way to produce larger
aggregates, which might in turn form the seeds to proceed to growing
planetesimals.Comment: 9 pages, 20 figure
Crossing barriers in planetesimal formation: The growth of mm-dust aggregates with large constituent grains
Collisions of mm-size dust aggregates play a crucial role in the early phases of planet formation. It is for example currently unclear whether there is a bouncing barrier where millimeter aggregates no longer grow by sticking. We developed a laboratory setup that allowed us to observe collisions of dust aggregates levitating at mbar pressures and elevated temperatures of 800 K. We report on collisions between basalt dust aggregates of from 0.3 to 5 mm in size at velocities between 0.1 and 15 cm/s. Individual grains are smaller than 25 μm in size. We find that for all impact energies in the studied range sticking occurs at a probability of 32.1 ± 2.5% on average. In general, the sticking probability decreases with increasing impact parameter. The sticking probability increases with energy density (impact energy per contact area). We also observe collisions of aggregates that were formed by a previous sticking of two larger aggregates. Partners of these aggregates can be detached by a second collision with a probability of on average 19.8 ± 4.0%. The measured accretion efficiencies are remarkably high compared to other experimental results. We attribute this to the relatively large dust grains used in our experiments, which make aggregates more susceptible to restructuring and energy dissipation. Collisional hardening by compaction might not occur as the aggregates are already very compact with only 54 ± 1% porosity. The disassembly of previously grown aggregates in collisions might stall further aggregate growth. However, owing to the levitation technique and the limited data statistics, no conclusive statement about this aspect can yet be given. We find that the detachment efficiency decreases with increasing velocities and accretion dominates in the higher velocity range. For high accretion efficiencies, our experiments suggest that continued growth in the mm-range with larger constituent grains would be a viable way to produce larger aggregates, which might in turn form the seeds to proceed to growing planetesimals. © 2012 ESO
Comparison of Different Parallel Implementations of the 2+1-Dimensional KPZ Model and the 3-Dimensional KMC Model
We show that efficient simulations of the Kardar-Parisi-Zhang interface
growth in 2 + 1 dimensions and of the 3-dimensional Kinetic Monte Carlo of
thermally activated diffusion can be realized both on GPUs and modern CPUs. In
this article we present results of different implementations on GPUs using CUDA
and OpenCL and also on CPUs using OpenCL and MPI. We investigate the runtime
and scaling behavior on different architectures to find optimal solutions for
solving current simulation problems in the field of statistical physics and
materials science.Comment: 14 pages, 8 figures, to be published in a forthcoming EPJST special
issue on "Computer simulations on GPU
Reconstructing Velocities of Migrating Birds from Weather Radar – A Case Study in Computational Sustainability
Bird migration occurs at the largest of global scales, but monitoring such movements can be challenging. In the US there is an operational network of weather radars providing freely accessible data for monitoring meteorological phenomena in the atmosphere. Individual radars are sensitive enough to detect birds, and can provide insight into migratory behaviors of birds at scales that are not possible using other sensors. Archived data from the WSR-88D network of US weather radars hold valuable and detailed information about the continent-scale migratory movements of birds over the last 20 years. However, significant technical challenges must be overcome to understand this information and harness its potential for science and conservation. We describe recent work on an AI system to quantify bird migration using radar data, which is part of the larger BirdCast project to model and forecast bird migration at large scales using radar, weather, and citizen science data
Calcium Channel Blocker D-\u3cem\u3ecis\u3c/em\u3e-Diltiazem Does Not Slow Retinal Degeneration in the \u3cem\u3ePDE6B\u3c/em\u3e Mutant \u3cem\u3ercd1\u3c/em\u3e Canine Model of Retinitis Pigmentosa
Purpose: D-cis-diltiazem, a calcium channel blocker, has been reported to enhance photoreceptor survival in the rd mouse, a model of retinitis pigmentosa (RP) resulting from mutation of the PDE6B gene. We tested the hypothesis that diltiazem treatment would similarly rescue the canine rcd1 model of RP, which is also caused by a null mutation in the PDE6B gene.
Methods: D-cis-diltiazem was delivered orally twice daily to rcd1 affected dogs beginning at 4 weeks of age; untreated age-matched rcd1 dogs served as controls. At 14 weeks, electroretinograms (ERG) were performed on all animals; 14 dogs were euthanized at this age, and 2 dogs at 25 weeks of age. Eyes were enucleated, fixed, and processed for routine histological examination.
Results: No significant differences were found in ERG or histopathologic parameters between diltiazem-treated and untreated rcd1 dogs. Neither rcd1 group showed a rod b-wave; ERGs evoked by single white flashes (dark- or light-adapted) and flicker were also identical between groups. Similarly, treated and untreated animals did not differ in the degree of preservation of the photoreceptor layer, confirmed in cell counts within the outer nuclear layer.
Conclusions: Treatment of rcd1 affected dogs with D-cis-diltiazem did not modify the photoreceptor disease when results were assessed using either ERG or histopathologic criteria. The positive photoreceptor-rescue effect of calcium channel blockers reported in the rd mouse was thus not generalizable to another species with retinal degeneration due to mutation in the PDE6B gene. Caution needs to be exerted in extrapolation to the comparable human forms of RP
Aging of the (2+1)-dimensional Kardar-Parisi-Zhang model
Extended dynamical simulations have been performed on a 2+1 dimensional
driven dimer lattice gas model to estimate ageing properties. The
auto-correlation and the auto-response functions are determined and the
corresponding scaling exponents are tabulated. Since this model can be mapped
onto the 2+1 dimensional Kardar-Parisi-Zhang surface growth model, our results
contribute to the understanding of the universality class of that basic system.Comment: 6 pages, 5 figs, 1 table, accepted version in PR
- …