Engineering the Cambrian explosion: the earliest bioturbators as ecosystem engineers

By applying modern biological criteria to trace fossil types and assessing burrow morphology, complexity, depth, potential burrow function and the likelihood of bioirrigation, we assign ecosystem engineering impact (EEI) values to the key ichnotaxa in the lowermost Cambrian (Fortunian). Surface traces such as Monomorphichnus have minimal impact on sediment properties and have very low EEI values; quasi-infaunal traces of organisms that were surficial modifiers or biodiffusors, such as Planolites, have moderate EEI values; and deeper infaunal, gallery biodiffusive or upward-conveying/downward-conveying traces, such as Teichichnus and Gyrolithes, have the highest EEI values. The key Cambrian ichnotaxon Treptichnus pedum has a moderate to high EEI value, depending on its functional interpretation. Most of the major functional groups of modern bioturbators are found to have evolved during the earliest Cambrian, including burrow types that are highly likely to have been bioirrigated. In fine-grained (or microbially bound) sedimentary environments, trace-makers of bioirrigated burrows would have had a particularly significant impact, generating advective fluid flow within the sediment for the first time, in marked contrast with the otherwise diffusive porewater systems of the Proterozoic. This innovation is likely to have created significant ecospace and engineered fundamentally new infaunal environments for macrobiotic and microbiotic organisms alike

Life in the slip lane: the effect of molecular level friction on algal adhesion

The settlement and adhesion of Navicula perminuta and Ulva linza to methyl-terminated alkanethiol self-assembled monolayers (SAMs) of increasing chain length has been investigated. Organisms were allowed to settle onto the monolayers and were subsequently exposed to hydrodynamic shear stress in order to determine their adhesion strength. Results show that as the SAM structure changes from amorphous to crystalline (C14), there is a marked change in the adhesion of N. perminuta and U. linza. Given that the SAMs in the series all exhibit similar contact angle behaviour and surface energy, it is hypothesized that the lubricity of the surface plays a role in determining the surface adhesion

Modelling the potential of integrated vegetation bands (IVB) to retain stormwater runoff on steep hillslopes of Southeast Queensland, Australia

Rainfall intensity is predicted to increase under a changing climate, leading to increased risks of hillslope erosion, downstream sedimentation and flooding. For many catchments used for grazing and agricultural land uses, it will become increasingly important to maintain ecohydrological functioning despite climatic extremes. One means to achieve this is through strategic reforestation using locally endemic species, in spatial configurations that effectively intercept, retain or and redistribute overland flows. This paper adopts a modelling approach for investigating the potential of one such design termed “integrated vegetation bands” (IVB), to increase the retention of runoff across steep hillslopes, particularly in the sub-tropics where rainstorms are becoming increasingly intense. A spatially distributed simulation model (MIKE-SHE) was applied to a steep, grazed catchment (Maronghi Creek catchment, Southeast Queensland, Australia) to compare stormwater runoff characteristics between: (1) the existing pasture land cover; and (2) a series of hypothetical IVB added across this pasture land. The IVB were approximately 20 m wide, and configured at 5% gradient towards ridgelines. Results for estimates of overland flow depth and infiltration (spatial), and accumulative water balance (temporal), confirm that the area of hillslope retaining > 10 mm/day more runoff increased by 22% under IVB compared to the pasture land use. Excluding the IVB themselves, the area of hillslope where runoff retention increased was 11%. During the most intense rainfall, IVB held up to 25% greater water depth and had 10% greater infiltration at the hillslope scale. At the sub-catchment scale, discharge decreased by 7% and infiltration increased by 23%. The findings for sub-tropical landscapes presented here are consistent with studies conducted in temperate regions. Based on the results of this preliminary modelling work, the IVB concept has been established as a paired-catchment field trial in a high rainfall catchment in Southeast Queensland, Australia

Blending Landsat and MODIS Data to Generate Multispectral Indices: A Comparison of “Index-then-Blend” and “Blend-then-Index” Approaches

The objective of this paper was to evaluate the accuracy of two advanced blending algorithms, Spatial and Temporal Adaptive Reflectance Fusion Model (STARFM) and Enhanced Spatial and Temporal Adaptive Reflectance Fusion Model (ESTARFM) to downscale Moderate Resolution Imaging Spectroradiometer (MODIS) indices to the spatial resolution of Landsat. We tested two approaches: (i) "Index-then-Blend" (IB); and (ii) "Blend-then-Index" (BI) when simulating nine indices, which are widely used for vegetation studies, environmental moisture assessment and standing water identification. Landsat-like indices, generated using both IB and BI, were simulated on 45 dates in total from three sites. The outputs were then compared with indices calculated from observed Landsat data and pixel-to-pixel accuracy of each simulation was assessed by calculating the: (i) bias; (ii) R; and (iii) Root Mean Square Deviation (RMSD). The IB approach produced higher accuracies than the BI approach for both blending algorithms for all nine indices at all three sites. We also found that the relative performance of the STARFM and ESTARFM algorithms depended on the spatial and temporal variances of the Landsat-MODIS input indices. Our study suggests that the IB approach should be implemented for blending of environmental indices, as it was: (i) less computationally expensive due to blending single indices rather than multiple bands; (ii) more accurate due to less error propagation; and (iii) less sensitive to the choice of algorithm

Escola de Belas Artes e Indústrias do Paraná : o projeto de ensino de artes e ofícios de Antônio Mariano de Lima - Curitiba, 1886-1902

Orientadora: Serlei Maria Fischer RanziDissertação (mestrado) - Universidade Federal do Paraná, Setor de Educação, Programa de Pós-Graduação em Educação. Defesa: Curitiba, 2004Inclui bibliografi

Surface modification of hydrophobic polymers for improvement of endothelial cell-surface interactions

The aim of this study is to improve the interaction of endothelial cells with polymers used in vascular prostheses. Polytetrafluoroethylene (PTFE; Teflon) films were treated by means of nitrogen and oxygen plasmas. Depending on the plasma exposure time, modified PTFE surfaces showed water-contact angles of 15¿58° versus 96° for unmodified PTFE. Electron spectroscopy in chemical analysis (ESCA) measurements revealed incorporation of both nitrogenand oxygen-containing groups into the PTFE surfaces, dependent on the plasma composition and exposure time. In-vitro biological evaluation of unmodified and modified PTFE surfaces showed that human endothelial cells, seeded from 20% human serum-containing culture medium, adhered well on to modified PTFE surfaces, but not on to unmodified films. Adhesion of endothelial cells on to expanded PTFE graft material (Gore-Tex) was also stimulated by plasma treatment of this substrate. On plasma-treated expanded PTFE, the adhering endothelial cells formed a monolayer, which covered the textured surface. The latter observation is important in view of the hemocompatibility of vascular grafts seeded with endothelial cells before implantation

Nano-scale superhydrophobicity: suppression of protein adsorption and promotion of flow-induced detachment

Wall adsorption is a common problem in microfluidic devices, particularly when proteins are used. Here we show how superhydrophobic surfaces can be used to reduce protein adsorption and to promote desorption. Hydrophobic surfaces, both smooth and having high surface roughness of varying length scales (to generate superhydrophobicity), were incubated in protein solution. The samples were then exposed to flow shear in a device designed to simulate a microfluidic environment. Results show that a similar amount of protein adsorbed onto smooth and nanometer-scale rough surfaces, although a greater amount was found to adsorb onto superhydrophobic surfaces with micrometer scale roughness. Exposure to flow shear removed a considerably larger proportion of adsorbed protein from the superhydrophobic surfaces than from the smooth ones, with almost all of the protein being removed from some nanoscale surfaces. This type of surface may therefore be useful in environments, such as microfluidics, where protein sticking is a problem and fluid flow is present. Possible mechanisms that explain the behaviour are discussed, including decreased contact between protein and surface and greater shear stress due to interfacial slip between the superhydrophobic surface and the liquid

Toxic metal enrichment and boating intensity: sediment records of antifoulant copper in shallow lakes of eastern England

Tributyltin (TBT), an aqueous biocide derived from antifouling paint pollution, is known to have impacted coastal marine ecosystems, and has been reported in the sediment of the Norfolk and Suffolk Broads, a network of rivers and shallow lakes in eastern England. In the marine environment, the 1987 TBT ban has resulted in expanded use of alternative biocides, raising the question of whether these products too have impacted the Broads ecosystem and freshwaters in general. Here we examine the lake sediment record in the Norfolk and Suffolk Broads for contamination by copper (Cu) (as an active biocide agent) and zinc (Zn) (as a component of booster biocides), to assess their occurrence and potential for causing environmental harm in freshwater ecosystems. We find that, after the introduction of leisure boating, there is a statistically significant difference in Cu enrichment between heavily and lightly boated sites, while no such difference exists prior to this time. At the heavily boated sites the onset of Cu enrichment coincides with a period of rapid increase in leisure boating. Such enrichment is maintained to the present day, with some evidence of continued increase. We conclude that Cu-based antifouling has measurably contaminated lakes exposed to boating, at concentrations high enough to cause ecological harm. Similar findings can be expected at other boated freshwater ecosystems elsewhere in the world