410 research outputs found
Diffusion Flame Stabilization
Diffusion flames are commonly used for industrial burners in furnaces and flares. Oxygen/fuel burners are usually diffusion burners, primarily for safety reasons, to prevent flashback and explosion in a potentially dangerous system. Furthermore, in most fires, condensed materials pyrolyze, vaporize, and burn in air as diffusion flames. As a result of the interaction of a diffusion flame with burner or condensed-fuel surfaces, a quenched space is formed, thus leaving a diffusion flame edge, which plays an important role in flame holding in combustion systems and fire spread through condensed fuels. Despite a long history of jet diffusion flame studies, lifting/blowoff mechanisms have not yet been fully understood, compared to those of premixed flames. In this study, the structure and stability of diffusion flames of gaseous hydrocarbon fuels in coflowing air at normal earth gravity have been investigated experimentally and computationally. Measurements of the critical mean jet velocity (U(sub jc)) of methane, ethane, or propane at lifting or blowoff were made as a function of the coflowing air velocity (U(sub a)) using a tube burner (i.d.: 2.87 mm) (Fig. 1, left). By using a computational fluid dynamics code with 33 species and 112 elementary reaction steps, the internal chemical-kinetic structures of the stabilizing region of methane and propane flames were investigated (Fig. 1, right). A peak reactivity spot, i.e., reaction kernel, is formed in the flame stabilizing region due to back-diffusion of heat and radical species against an oxygen-rich incoming flow, thus holding the trailing diffusion flame. The simulated flame base moved downstream under flow conditions close to the measured stability limit
Combustion Characteristics in a Non-Premixed Cool-Flame Regime of n-Heptane in Microgravity
A series of distinct phenomena have recently been observed in single-fuel-droplet combustion tests performed on the International Space Station (ISS). This study attempts to simulate the observed flame behavior numerically using a gaseous n-heptane fuel source in zero gravity and a time-dependent axisymmetric (2D) code, which includes a detailed reaction mechanism (127 species and 1130 reactions), diffusive transport, and a radiation model (for CH4, CO, CO2, H2O, and soot). The calculated combustion characteristics depend strongly on the air velocity around the fuel source. In a near-quiescent air environment (< or = 2 mm/s), with a sufficiently large fuel injection velocity (1 cm/s), a growing spherical diffusion flame extinguishes at 1200 K due to radiative heat losses. This is typically followed by a transition to the low-temperature (cool-flame) regime with a reaction zone (at 700 K) in close proximity to the fuel source. The 'cool flame' regime is formed due to the negative temperature coefficient in the low-temperature chemistry. After a relatively long period (18 s) of the cool flame regime, a flash re-ignition occurs, associated with flame-edge propagation and subsequent extinction of the re-ignited flame. In a low-speed (3 mm/s) airstream (which simulates the slight droplet movement), the diffusion flame is enhanced upstream and experiences a local extinction downstream at 1200 K, followed by steady flame pulsations (0.4 Hz). At higher air velocities (4-10 mm/s), the locally extinguished flame becomes steady state. The present axisymmetric computational approach helps in revealing the non-premixed 'cool flame' structure and 2D flame-flow interactions observed in recent microgravity droplet combustion experiments
Hidden Symmetry Protection and Topology in Surface Maxwell Waves
Since the latter half of the 20th century, the use of metal in optics has
become a promising plasmonics field for controlling light at a deep
subwavelength scale. Surface plasmon polaritons localized on metal surfaces are
crucial in plasmonics. However, despite the long history of plasmonics, the
underlying mechanism producing the surface waves is not fully understood. This
study unveils the hidden symmetry protection that ensures the existence of
degenerated electric zero modes. These zero modes are identified as physical
origins of surface plasmon polaritons, and similar zero modes can be directly
excited at a temporal boundary. In real space, the zero modes possess
vector-field rotation related to surface impedance. Focusing on the surface
impedance, we prove the bulk-edge correspondence, which guarantees the
existence of surface plasmon polaritons even with nonuniformity. Lastly, we
extract the underlying physics in the topological transition between metal and
dielectric material using a minimal circuit model with duality. The transition
is considered the crossover between electric and magnetic zero modes.Comment: 26 pages, 19 figures, minor correction
Notch1 and Notch3 Instructively Restrict bFGF-Responsive Multipotent Neural Progenitor Cells to an Astroglial Fate
AbstractNotch1 has been shown to induce glia in the peripheral nervous system. However, it has not been known whether Notch can direct commitment to glia from multipotent progenitors of the central nervous system. Here we present evidence that activated Notch1 and Notch3 promotes the differentiation of astroglia from the rat adult hippocampus-derived multipotent progenitors (AHPs). Quantitative clonal analysis indicates that the action of Notch is likely to be instructive. Transient activation of Notch can direct commitment of AHPs irreversibly to astroglia. Astroglial induction by Notch signaling was shown to be independent of STAT3, which is a key regulatory transcriptional factor when ciliary neurotrophic factor (CNTF) induces astroglia. These data suggest that Notch provides a CNTF-independent instructive signal of astroglia differentiation in CNS multipotent progenitor cells
- …