Training Practices of Academy Rugby League and their alignment to Physical Qualities deemed important for Current and Future Performance

This study aimed to investigate rugby league coaches’ perceptions of physical qualities for current and future performance, while also establishing the training practices of Under-16 and Under-19 players. Twenty-four practitioners (rugby coach, strength and conditioning coach) working within nine Super League clubs completed a questionnaire. The questionnaire required practitioners to rank eleven physical qualities (i.e., strength, power, acceleration, maximum speed, aerobic endurance, change of direction, agility, height, body mass, lean mass and fat mass) by importance for current performance, future performance and career longevity according to playing position (forwards, backs, hookers & halves). Practitioners were asked to provide detail on the frequency and duration of each type of training session completed during a typical week throughout each phase of the season; pre-season, in-season (early), in-season (mid), and in-season (late). Typically, practitioners ranked strength, power and acceleration qualities highest, and endurance and anthropometric qualities lowest. The importance of physical qualities varied according to each playing level and position. Training practices of U16 and U19 players differed during each phase of the season, with U19 players undertaking greater training volumes than U16s players. Overall, the physical qualities coaches perceived as most important were not reflected within their training practices. Rugby league practitioners can use this information as a reference source to design long term athletic development plans, prescribe training and during player development procedures. Moreover, these data can inform and improve training practices while influencing the design of pre-season preparatory phases and in-season periods

Top secret training data? External training loads of a cup winning English Super League rugby league team

This study quantified the field-based external training loads of professional rugby league players using global positioning systems technology across a playing season. Eleven professional rugby league players were monitored during all field-based training activities during the 2014 Super League season. Training sessions undertaken in preseason (n = 211 observations), early (n = 194 observations), middle (n = 171 observations) and late (n = 206 observations) phases of the in-season were averaged for each player and used in the analyses. Large reductions in external training loads between preseason and in-season periods were observed. Within season, a decrease in intensity (relative distance, absolute and relative total-HSR) with a limited change in training duration was observed. These data provide a useful reference for coaches working with similar cohorts, while future research should quantify the adequacy of the training loads reported, considering impact on performance and injury

A digitally driven manufacturing process for high resolution patterning of cell formations

This paper presents the engineering and validation of an enabling technology that facilitates new capabilities in in vitro cell models for high-throughput screening and tissue engineering applications. This is conducted through a computerized system that allows the design and deposition of high-fidelity microscale patterned coatings that selectively alter the chemical and topographical properties of cell culturing surfaces. Significantly, compared to alternative methods for microscale surface patterning, this is a digitally controlled and automated process thereby allowing scientists to rapidly create and explore an almost infinite range of cell culture patterns. This new capability is experimentally validated across six different cell lines demonstrating how the precise microscale deposition of these patterned coatings can influence spatiotemporal growth and movement of endothelial, fibroblast, neuronal and macrophage cells. To further demonstrate this platform, more complex patterns are then created and shown to guide the behavioral response of colorectal carcinoma cells

High resolution mapping of a novel late blight resistance gene Rpi-avll, from the wild Bolivian species Solanum avilesii

Both Mexico and South America are rich in Solanum species that might be valuable sources of resistance (R) genes to late blight (Phytophthora infestans). Here, we focus on an R gene present in the diploid Bolivian species S. avilesii. The genotype carrying the R gene was resistant to eight out of 10 Phytophthora isolates of various provenances. The identification of a resistant phenotype and the generation of a segregating population allowed the mapping of a single dominant R gene, Rpi-avl1, which is located in an R gene cluster on chromosome 11. This R gene cluster is considered as an R gene “hot spot”, containing R genes to at least five different pathogens. High resolution mapping of the Rpi-avl1 gene revealed a marker co-segregating in 3890 F1 individuals, which may be used for marker assisted selection in breeding programs and for further cloning of Rpi-avl

Influenza pandemic preparedness: motivation for protection among small and medium businesses in Australia

<p>Abstract</p> <p>Background</p> <p>Community-wide preparedness for pandemic influenza is an issue that has featured prominently in the recent news media, and is currently a priority for health authorities in many countries. The small and medium business sector is a major provider of private sector employment in Australia, yet we have little information about the preparedness of this sector for pandemic influenza. This study aimed to investigate the association between individual perceptions and preparedness for pandemic influenza among small and medium business owners and managers.</p> <p>Methods</p> <p>Semi-structured face-to-face interviews were conducted with 201 small and medium business owners or managers in New South Wales and Western Australia. Eligible small or medium businesses were defined as those that had less than 200 employees. Binomial logistic regression analysis was used to identify the predictors of having considered the impact of, having a plan for, and needing help to prepare for pandemic influenza.</p> <p>Results</p> <p>Approximately 6 per cent of participants reported that their business had a plan for pandemic influenza, 39 per cent reported that they had not thought at all about the impact of pandemic influenza on their business, and over 60 per cent stated that they required help to prepare for a pandemic. Beliefs about the severity of pandemic influenza and the ability to respond were significant independent predictors of having a plan for pandemic influenza, and the perception of the risk of pandemic influenza was the most important predictor of both having considered the impact of, and needing help to prepare for a pandemic.</p> <p>Conclusion</p> <p>Our findings suggest that small and medium businesses in Australia are not currently well prepared for pandemic influenza. We found that beliefs about the risk, severity, and the ability to respond effectively to the threat of pandemic influenza are important predictors of preparedness. Campaigns targeting small and medium businesses should emphasise the severity of the consequences to their businesses if a pandemic were to occur, and, at the same time, reassure them that there are effective strategies capable of being implemented by small and medium businesses to deal with a pandemic.</p

Addition of serum-containing medium to cerebrospinal fluid prevents cellular loss over time

Immediately after sampling, leukocyte counts in native cerebrospinal fluid (CSF) start to decrease rapidly. As the time lapse between CSF collection to analysis is not routinely registered, the clinical significance of decreasing cell counts in native CSF is not known. Earlier data suggest that addition of serum-containing medium to CSF directly after sampling prevents this rapid decrease in leukocyte counts and, thus, may improve the accuracy of CSF cell counting and cell characterization. Here, we prospectively examined the effect of storage time after lumbar puncture on counts of leukocytes and their major subsets in both native CSF and after immediate addition of serum-containing medium, measured by flow cytometry and microscopy. We collected CSF samples of 69 patients in tubes with and tubes without serum-containing medium and determined counts of leukocytes and subsets at 30 minutes, 1 hour, and 5 hours after sampling. Compared to cell counts at 30 minutes, no significant decrease in cell number was observed in CSF with serum-containing medium 1 and 5 hours after sampling, except for the granulocytes at 1 hour. In native CSF, approximately 50% of leukocytes and all their subsets were lost after 1 hour, both in flow cytometric and microscopic counting. In 6/7 (86%) samples with mild pleocytosis (5–15 × 106 leukocytes/l), native CSF at 1 hour was incorrectly diagnosed as normocellular. In conclusion, addition of serum-containing medium to CSF directly after sampling prevents cell loss and allows longer preservation of CSF cells prior to analysis, both for microscopic and flow cytometric enumeration. We suggest that this protocol results in more accurate CSF cell counts and may prevent incorrect conclusions based on underestimated CSF cell counts

Digital LED Pixels: Instructions for use and a characterization of their properties

This article details how to control light emitting diodes (LEDs) using an ordinary desktop computer. By combining digitally addressable LEDs with an off-the-shelf microcontroller (Arduino), multiple LEDs can be controlled independently and with a high degree of temporal, chromatic, and luminance precision. The proposed solution is safe (can be powered by a 5-V battery), tested (has been used in published research), inexpensive (∼ $60 +$2 per LED), highly interoperable (can be controlled by any type of computer/operating system via a USB or Bluetooth connection), requires no prior knowledge of electrical engineering (components simply require plugging together), and uses widely available components for which established help forums already exist. Matlab code is provided, including a ‘minimal working example’ of use suitable for use by beginners. Properties of the recommended LEDs are also characterized, including their response time, luminance profile, and color gamut. Based on these, it is shown that the LEDs are highly stable in terms of both luminance and chromaticity, and do not suffer from issues of warm-up, chromatic shift, and slow response times associated with traditional CRT and LCD monitor technology

Adverse Events of Extracorporeal Ultrasound-Guided High Intensity Focused Ultrasound Therapy

High-intensity focused ultrasound (HIFU) is considered to be an alternative to surgery. Extracorporeal ultrasound-guided HIFU (USgFU) has been clinically used to treat solid tumors. Preliminary trials in a small sample of a Western population suggested that this modality was safe. Most trials are performed in China thereby providing comprehensive data for understanding the safety profile. The aim of this study was to evaluate adverse events of USgFU therapy.Clinical data were searched in 2 Chinese databases. Adverse events of USgFU were summarized and compared with those of magnetic resonance-guided HIFU (MRgFU; for uterine, bone or breast tumor) and transrectal ultrasound-guided HIFU (for prostate cancer or benign prostate hyperplasia). USgFU treatment was performed using 7 types of device. Side effects were evaluated in 13262 cases. There were fewer adverse events in benign lesions than in malignant lesions (11.81% vs. 21.65%, p<0.0001). Rates of adverse events greatly varied between the disease types (0-280%, p<0.0001) and between the applied HIFU devices in both malignant (10.58-44.38%, p<0.0001) and benign lesions (1.67-17.57%, p<0.0001). Chronological analysis did not demonstrate a decrease in the rate of adverse events. Based upon evaluable adverse events, incidences in USgFU were consistent with those in MRgFU or transrectal HIFU. Some side effects frequently occurred following transrectal HIFU were not reported in USgFU. Several events including intrahepatic metastasis, intraoperative high fever, and occlusions of the superior mesenteric artery should be of particular concern because they have not been previously noted. The types of adverse events suggested that they were ultrasonic lesions.The frequency of adverse events depended on the location of the lesion and the type of HIFU device; however, side effects of USgFU were not yet understood. USgFU did not decrease the incidence of adverse events compared with MRgFU

Seismically induced landslide hazard and exposure modelling in Southern California based on the 1994 Northridge, California earthquake event

Quantitative modelling of landslide hazard, as opposed to landslide susceptibility, as a function of the earthquake trigger is vital in understanding and assessing future potential exposure to landsliding. Logistic regression analysis is a method commonly used to assess susceptibility to landsliding; however, estimating probability of landslide hazard as a result of an earthquake trigger is rarely undertaken. This paper utilises a very detailed landslide inventory map and a comprehensive dataset on peak ground acceleration for the 1994 Mw6.7 Northridge earthquake event to fit a landslide hazard logistic regression model. The model demonstrates a high success rate for estimating probability of landslides as a result of earthquake shaking. Seven earthquake magnitude scenarios were simulated using the Open Source Seismic Hazard Analysis (OpenSHA) application to simulate peak ground acceleration, a covariate of landsliding, for each event. The exposure of assets such as population, housing and roads to high levels of shaking and high probabilities of landsliding was estimated for each scenario. There has been urban development in the Northridge region since 1994, leading to an increase in prospective exposure of assets to the earthquake and landslide hazards in the event of a potential future earthquake. As the earthquake scenario magnitude increases, the impact from earthquake shaking initially increases then quickly levels out, but potential losses from landslides increase at a rapid rate. The modelling approach, as well as the specific model, developed in this paper can be used to estimate landslide probabilities as a result of an earthquake event for any scenario where the peak ground acceleration variable is available