CARACTERIZAÇÃO DO PANICUM MAXIMUM PARA PRODUÇÃO DE ETANOL DE 2º GERAÇÃO

O Panicum Maximum cv. Colonião (capim-colonião), é considerado em meio a cultura de cana-de-açúcar uma planta daninha devido a concorrência pelos recursos do meio, principalmente água, luz e nutrientes, liberando substâncias alelopáticas, atuando como hospedeiro de pragas e doenças comuns à cultura e interferindo nas práticas de colheita. Sem alto valor agregado e podendo diminuir o uso de herbicidas pensou-se na produção de etanol a partir do Panicum. O objetivo desde projeto perfaz toda a cadeia sucroalcooleira de produção de etanol, desde o plantio e cultivo do Panicum, passando pela rota processual de produção de etanol de 1ª ou 2ª geração até a avaliação dos parâmetros físico-químicos do etanol, como controle de qualidade do produto acabado. Até o  momento realizou-se as seguintes etapas: plantio do Panicum e testou-se com amostras do mesmo colhido na cidade de Matão a produção de etanol de 1° geração. PALAVRAS-CHAVE: Produção de etanol, 1° Geração, 2° Geração, Capim colonião.

Biodiesel Processing Using Sodium and Potassium Geopolymer Powders as Heterogeneous Catalysts

This work investigates the catalytic activity of geopolymers produced using two different alkali components (sodium or potassium) and four treatment temperatures (110 to 700 \ub0C) for the methyl transesterification of soybean oil. The geopolymers were prepared with metakaolin as an aluminosilicate source and alkaline activating solutions containing either sodium or potassium in the same molar oxide proportions. The potassium-based formulation displayed a higher specific surface area and lower average pore size (28.64-62.54 m\ub2/g; 9 nm) than the sodium formulation (6.34-32.62 m\ub2/g; 17 nm). The reduction in specific surface area (SSA) after the heat treatment was more severe for the sodium formulation due to the higher thermal shrinkage. The catalytic activity of the geopolymer powders was compared under the same reactional conditions (70-75 \ub0C, 150% methanol excess, 4 h reaction) and same weight amounts (3% to oil). The differences in performance were attributed to the influences of sodium and potassium on the geopolymerization process and to the accessibility of the reactants to the catalytic sites. The Na-based geopolymers performed better, with FAME contents in the biodiesel phase of 85.1% and 89.9% for samples treated at 500 and 300 \ub0C, respectively. These results are competitive in comparison with most heterogeneous base catalysts reported in the literature, considering the very mild conditions of temperature, excess methanol and catalyst amount and the short time spent in reactions

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Evaluation of pH, available chlorine content, and antibacterial activity of endodontic irrigants and their combinations against Enterococcus faecalis

Objectives. The objectives of this study were to evaluate pH, available chlorine content, and antibacterial activity of endodontic irrigants and their combinations.Study design. The pH and chlorine content of sodium hypochlorite (NaOCl) were analyzed pure and in combination with 10% citric acid (CA) and apple vinegar (AV). The antibacterial effect of the following solutions was measured by direct contact test against Enterococcus faecalis: 2.5% NaOCl, 2.5% NaOCl + 10% CA (7:3), 2.5% NaOCl + AV (5:5), 10% CA, and AV. Sterile saline was used as control. The colony-forming units were determined by serial decimal dilutions.Results. The combination of 2.5% NaOCl with CA or AV lowered the pH and the chlorine content. NaOCl, alone or in combination was able to eliminate E. faecalis in 30 seconds, and CA, after 10 minutes. AV promoted reduction (32.2%) after 10 minutes.Conclusions. NaOCl with acidic solutions lowered the pH and the chlorine content, but did not alter its antibacterial effect. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2011; 112:132-135

Catalytic Transformation of Triglycerides to Biodiesel with SiO₂-SO₃H and Quaternary Ammonium Salts in Toluene or DMSO

SiO2-SO3H, with a surface area of 115 m2·g−1, pore volumes of 0.38 cm3·g−1 and 1.32 mmol H+/g, was used as a transesterification catalyst. Triglycerides of waste cooking oil reacted with methanol in refluxing toluene to yield mixtures of diglycerides, monoglycerides and fatty acid methyl esters (FAMEs) in the presence of 20% (w/w) catalyst/oil using the hydrophilic sulfonated silica (SiO2-SO3H) catalyst alone or with the addition of 10% (w/w) co-catalyst/oil [(Bun4N)(BF4) or Aliquat 336]. The addition of the ammonium salts to the catalyst lead to a decrease in the amounts of diglycerides in the products, but the concentrations of monoglycerides increased. Mixtures of (Bun4N)(BF4)/catalyst were superior to catalyst alone or Aliquat 336/catalyst for promoting the production of mixtures with high concentrations of FAMEs. The same experiments were repeated using DMSO as the solvent. The use of the more polar solvent resulted in excellent conversion of the triglycerides to FAME esters with all three-catalyst media. A simplified mechanism is presented to account for the experimental results

Bioenergia: desenvolvimento, pesquisa e inovação

Com 27 trabalhos produzidos por pesquisadores do Instituto de Pesquisa em Bioenergia (Bioen), da Unesp, este livro oferece uma ampla visão sobre as áreas que compõem o segmento. Seu principal objetivo é contribuir para melhorar a compreensão dos vários aspectos da bioenergia, em especial no Brasil, que figura entre os países com maior nível de desenvolvimento tecnológico no setor. Os artigos abordam uma série abrangente de questões relacionadas à bioenergia, como a construção genética das plantas de cana-de-açúcar visando ao aumento de produtividade, a disseminação de sementes para estimular a propagação de espécies com potencial energético, etapas de produção de bioenergia, usos do combustível e seus efeitos nos diversos tipos de motores. Agrupados por assunto, os textos estão distribuídos em cinco partes: Biomassa para bioenergia; Produção de biocombustíveis; Utilização de bioenergia; Biorrefinaria, alcoolquímica e oleoquímica e Sustentabilidade dos biocombustíveis