53 research outputs found
ANNINE-6plus, a voltage-sensitive dye with good solubility, strong membrane binding and high sensitivity
We present a novel voltage-sensitive hemicyanine dye ANNINE-6plus and describe its synthesis, its properties and its voltage-sensitivity in neurons. The dye ANNINE-6plus is a salt with a double positively charged chromophore and two bromide counterions. It is derived from the zwitterionic dye ANNINE-6. While ANNINE-6 is insoluble in water, ANNINE-6plus exhibits a high solubility of around 1 mM. Nonetheless, it displays a strong binding to lipid membranes. In contrast to ANNINE-6, the novel dye can be used to stain cells from aqueous solution without surfactants or organic solvents. In neuronal membranes, ANNINE-6plus exhibits the same molecular Stark effect as ANNINE-6. As a consequence, a high voltage-sensitivity is achieved with illumination and detection in the red end of the excitation and emission spectra, respectively. ANNINE-6plus will be particularly useful for sensitive optical recording of neuronal excitation when organic solvents and surfactants must be avoided as with intracellular or extracellular staining of brain tissue
Image informatics strategies for deciphering neuronal network connectivity
Brain function relies on an intricate network of highly dynamic neuronal connections that rewires dramatically under the impulse of various external cues and pathological conditions. Among the neuronal structures that show morphologi- cal plasticity are neurites, synapses, dendritic spines and even nuclei. This structural remodelling is directly connected with functional changes such as intercellular com- munication and the associated calcium-bursting behaviour. In vitro cultured neu- ronal networks are valuable models for studying these morpho-functional changes. Owing to the automation and standardisation of both image acquisition and image analysis, it has become possible to extract statistically relevant readout from such networks. Here, we focus on the current state-of-the-art in image informatics that enables quantitative microscopic interrogation of neuronal networks. We describe the major correlates of neuronal connectivity and present workflows for analysing them. Finally, we provide an outlook on the challenges that remain to be addressed, and discuss how imaging algorithms can be extended beyond in vitro imaging studies
Primer to Voltage Imaging With ANNINE Dyes and Two-Photon Microscopy
ANNINE-6 and ANNINE-6plus are voltage-sensitive dyes that when combined with two-photon microscopy are ideal for recording of neuronal voltages in vivo, in both bulk loaded tissue and the dendrites of single neurons. Here, we describe in detail but for a broad audience the voltage sensing mechanism of fast voltage-sensitive dyes, with a focus on ANNINE dyes, and how voltage imaging can be optimized with one-photon and two-photon excitation. Under optimized imaging conditions the key strengths of ANNINE dyes are their high sensitivity (0.5%/mV), neglectable bleaching and phototoxicity, a linear response to membrane potential, and a temporal resolution which is faster than the optical imaging devices currently used in neurobiology (order of nanoseconds). ANNINE dyes in combination with two-photon microscopy allow depth-resolved voltage imaging in bulk loaded tissue to study average membrane voltage oscillations and sensory responses. Alternatively, if ANNINE-6plus is applied internally, supra and sub threshold voltage changes can be recorded from dendrites of single neurons in awake animals. Interestingly, in our experience ANNINE-6plus labeling is impressively stable in vivo, such that voltage imaging from single Purkinje neuron dendrites can be performed for 2 weeks after a single electroporation of the neuron. Finally, to maximize their potential for neuroscience studies, voltage imaging with ANNINE dyes and two-photon microscopy can be combined with electrophysiological recording, calcium imaging, and/or pharmacology, even in awake animals
A Compact Multiphoton 3D Imaging System for Recording Fast Neuronal Activity
We constructed a simple and compact imaging system designed specifically for the recording of fast neuronal activity in a 3D volume. The system uses an Yb:KYW femtosecond laser we designed for use with acousto-optic deflection. An integrated two-axis acousto-optic deflector, driven by digitally synthesized signals, can target locations in three dimensions. Data acquisition and the control of scanning are performed by a LeCroy digital oscilloscope. The total cost of construction was one order of magnitude lower than that of a typical Ti:sapphire system. The entire imaging apparatus, including the laser, fits comfortably onto a small rig for electrophysiology. Despite the low cost and simplicity, the convergence of several new technologies allowed us to achieve the following capabilities: i) full-frame acquisition at video rates suitable for patch clamping; ii) random access in under ten microseconds with dwelling ability in the nominal focal plane; iii) three-dimensional random access with the ability to perform fast volume sweeps at kilohertz rates; and iv) fluorescence lifetime imaging. We demonstrate the ability to record action potentials with high temporal resolution using intracellularly loaded potentiometric dye di-2-ANEPEQ. Our design proffers easy integration with electrophysiology and promises a more widespread adoption of functional two-photon imaging as a tool for the study of neuronal activity. The software and firmware we developed is available for download at http://neurospy.org/ under an open source license
Low-Cost Optical Mapping Systems for Panoramic Imaging of Complex Arrhythmias and Drug-Action in Translational Heart Models
Panoramic optical mapping is the primary method for imaging electrophysiological activity from the entire outer surface of Langendorff-perfused hearts. To date, it is the only method of simultaneously measuring multiple key electrophysiological parameters, such as transmembrane voltage and intracellular free calcium, at high spatial and temporal resolution. Despite the impact it has already had on the fields of cardiac arrhythmias and whole-heart computational modeling, present-day system designs precludes its adoption by the broader cardiovascular research community because of their high costs. Taking advantage of recent technological advances, we developed and validated low-cost optical mapping systems for panoramic imaging using Langendorff-perfused pig hearts, a clinically-relevant model in basic research and bioengineering. By significantly lowering financial thresholds, this powerful cardiac electrophysiology imaging modality may gain wider use in research and, even, teaching laboratories, which we substantiated using the lower-cost Langendorff-perfused rabbit heart model
Membrane potential induced by external electric field pulses can be followed with a potentiometric dye.
A potential-sensitive dye was recently used to measure the spatial variation in the membrane potential induced by an externally applied electric field. In this work, we demonstrate that the time course of these induced potentials can also be followed. Two experimental systems were explored. Dye fluorescence from HeLa cells could be modulated by a train of field pulses; the relative fluorescence change measured with a lock-in amplifier was linear with the field and similar to the fluorescence responses obtained in the static measurements. A model membrane system consisting of a hemispherical bilayer allowed convenient measurement of the dye absorbance change as a function of the bathing solution conductivity. The charging time of the membrane was inversely related to the aqueous conductance as predicted by the theoretical solution to Laplace's equation
Conference Report: 10th Annual University of Wisconsin Land O’Lakes Bioanalytical Conference
Measuring the effect of structural connectivity on the water dynamics in heterogeneous porous media using speedy neutron tomography
The temporal and spatial distribution of water within a porous medium is affected by the medium's structure, i.e., the spatial arrangement of its constituents. To analyze structural effects on the fluid dynamics, we measured the 3D water content distribution in a heterogeneous sand column during two drainage-wetting cycles using neutron transmission tomography. The sample with a volume of 105 cm(3) contained 101 cubes of fine and 49 cubes of coarse sand with particles ranging from 0.01 to 0.05 and 0.03 to 0.09 cm, respectively. The pressure at the lower boundary was determined by the water reservoir positioned between 7 and 39 cm below the top of the column. The duration of one complete 3D scanning with a spatial resolution of 127 gm was 56 s. The signal to noise ratio of the measurements was low due to the short exposure time in the neutron beam, but it was possible to quantify the water content in the individual cubes and hence the effect of structure on macroscopic water distribution. Continuous structures of coarse sand drained faster than coarse sand without connection to the upper boundary. During the initial wetting phase, cubes of coarse sand material completely embedded in the fine material remained water unsaturated due to air entrapment. The effect of the coarse sand connectivity was analyzed in two-dimensional numerical simulations based on Richards equation. In contrast to the measurements, no effect of structure connectivity was found. The coarse sand cubes embedded within the fine matrix drain as quickly as the coarse sand cubes arranged in a continuous channel due to the model assumption of a continuous air phase. (C) 2008 Elsevier Ltd. All rights reserved
- …