Common variants of the TCF7L2 gene are associated with increased risk of type 2 diabetes mellitus in a UK-resident South Asian population

Background Recent studies have implicated variants of the transcription factor 7-like 2 (TCF7L2) gene in genetic susceptibility to type 2 diabetes mellitus in several different populations. The aim of this study was to determine whether variants of this gene are also risk factors for type 2 diabetes development in a UK-resident South Asian cohort of Punjabi ancestry. Methods We genotyped four single nucleotide polymorphisms (SNPs) of TCF7L2 (rs7901695, rs7903146, rs11196205 and rs12255372) in 831 subjects with diabetes and 437 control subjects. Results The minor allele of each variant was significantly associated with type 2 diabetes; the greatest risk of developing the disease was conferred by rs7903146, with an allelic odds ratio (OR) of 1.31 (95% CI: 1.11 – 1.56, p = 1.96 × 10-3). For each variant, disease risk associated with homozygosity for the minor allele was greater than that for heterozygotes, with the exception of rs12255372. To determine the effect on the observed associations of including young control subjects in our data set, we reanalysed the data using subsets of the control group defined by different minimum age thresholds. Increasing the minimum age of our control subjects resulted in a corresponding increase in OR for all variants of the gene (p ≤ 1.04 × 10-7). Conclusion Our results support recent findings that TCF7L2 is an important genetic risk factor for the development of type 2 diabetes in multiple ethnic groups

Engineering nanoscale hypersonic phonon transport

Controlling the vibrations in solids is crucial to tailor their mechanical properties and their interaction with light. Thermal vibrations represent a source of noise and dephasing for many physical processes at the quantum level. One strategy to avoid these vibrations is to structure a solid such that it possesses a phononic stop band, i.e., a frequency range over which there are no available mechanical modes. Here, we demonstrate the complete absence of mechanical vibrations at room temperature over a broad spectral window, with a 5.3 GHz wide band gap centered at 8.4 GHz in a patterned silicon nanostructure membrane measured using Brillouin light scattering spectroscopy. By constructing a line-defect waveguide, we directly measure GHz localized modes at room temperature. Our experimental results of thermally excited guided mechanical modes at GHz frequencies provides an eficient platform for photon-phonon integration with applications in optomechanics and signal processing transduction

Vertical cavity lasers for optical interconnects

Vertical-cavity surface-emitting lasers are generating much interest due to their geometric suitability for two-dimensional array fabrication and their potential for achieving ultra-low thresholds. Here we report on optically- and electrically-pumped microlaser devices. having transverse dimensions of a few microns and active material lengths of a few hundred A. The very small volumes are a key factor in achieving low thresholds. So far however surface recombination has prevented us from achieving thresholds much below 1 mA

Effect of pretreatment with low-frequency ultrasound on quality parameters in gulupa (Passiflora edulis sims) pulp

The Gulupa (Passiflora edulis f. edulis Sims) is an expression of South America’s tropics’ biodiversity, and a source of B vitamins and amino acids. It is a climacteric export fruit for which it is necessary to incorporate emerging technologies for its conservation and transport. This work investigated the effect of ultrasound on gulupa pulp and verified the stability of the characters of interest in the shelf life of 20 days. Six treatments and a control sample were used, evaluated in triplicate, and varied in frequency (30 and 40 kHz) with an exposure time of 10, 20, and 30 min. A statistical analysis of unidirectional variances and Dunnett’s test was used. It was found that the ultrasound treatments did not affect the pH or the titratable acidity. Soluble solid results presented a significant increase (p < 0.05) (from 13.4 to 14.8% w/v) in the antioxidant capacity (from 1.13 to 1.54 µmol Trolox Equivalent (TE)/g by the ABTS•+ (2,2’-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) Cationic Radical Assay and from 3.3 to 3.7 µmol TE/g by the DPPH· (2,2-diphenyl-1-picrilhydrazil) Radical Scavenging Assay). During the shelf life, ascorbic acid was the parameter that varied most (p < 0.05). It decreased from 42.7 to 21.6 mg ascorbic acid/100 g of pulp in the control sample. However, a smaller decrease was observed (23.8–24.5 mg ascorbic acid/100 g of pulp) in the 40 kHz treatments. The smallest global color difference (∆E) for the control was found in the 40 kHz treatment at 30 min through the entire shelf life (day 0 to 20). Ultrasound treatment offers a new strategy to improve and extend the shelf life of chilled gulupa pulp

Tunable anisotropy in inverse opals and emerging optical properties

Using self-assembly, nanoscale materials can be fabricated from the bottom up. Opals and inverse opals are examples of self-assembled nanomaterials made from crystallizing colloidal particles. As self-assembly requires a high level of control, it is challenging to use building blocks with anisotropic geometry to form complex opals, which limits the realizable structures. Typically, spherical colloids are employed as building blocks, leading to symmetric, isotropic superstructures. However, a significantly richer palette of directionally dependent properties are expected if less symmetric, anisotropic structures can be created, especially originating from the assembly of regular, spherical particles. Here we show a simple method to introduce anisotropy into inverse opals by subjecting them to a post-assembly thermal treatment that results in directional shrinkage of the silica matrix caused by condensation of partially hydrated sol-gel silica structures. In this way, we can tailor the shape of the pores, and the anisotropy of the final inverse opal preserves the order and uniformity of the self-assembled structure, while completely avoiding the need to synthesize complex oval-shaped particles and crystallize them into such target geometries. Detailed X-ray photoelectron spectroscopy (XPS) and infrared (IR) spectroscopy studies clearly identify increasing degrees of sol-gel condensation in confinement as a mechanism for the structure change. A computer simulation of structure changes resulting from the condensation-induced shrinkage further confirmed this mechanism. As an example of property changes induced by the introduction of anisotropy, we characterized the optical spectra of the anisotropic inverse opals and found that the optical properties can be controlled in a precise way using calcination temperature

Extension of Type 2 Diabetes Genome-Wide Association Scan Results in the Diabetes Prevention Program

OBJECTIVE— Genome-wide association scans (GWASs) have identified novel diabetes-associated genes. We evaluated how these variants impact diabetes incidence, quantitative glycemic traits, and response to preventive interventions in 3,548 subjects at high risk of type 2 diabetes enrolled in the Diabetes Prevention Program (DPP), which examined the effects of lifestyle intervention, metformin, and troglitazone versus placebo

Non SUSY Unification in Left-Right Models

We explore in a model independent way the possibility of achieving the non supersymmetric gauge coupling unification within left-right symmetric models, with the minimal particle content at the left-right mass scale which could be as low as 1 TeV in a variety of models, and with a unification scale M in the range $10^5$ GeV $< M< 10^{17.7}$ GeV.Comment: 18 pages, Latex file, uses epsf style, four figures. Submitted for publication to Phys. Rev. D on Oct. 13, 199

Insights Into the Feeding Behaviors and Biomechanics of \u3ci\u3eVarroa destructor\u3c/i\u3e Mites on Honey Bee Pupae Using Electropenetrography and Histology

Feeding behaviors and biomechanics of female Varroa destructor mites are revealed from AC-DC electropenetrography (EPG) recordings of mites feeding from Apis mellifera honey bee pupae and histology of mite internal ingestion apparatus. EPG signals characteristic of arthropod suction feeding (ingestion) were identified for mites that fed on pupae during overnight recordings. Ingestion by these mites was confirmed afterwards by observing internally fluorescent microbeads previously injected into their hosts. Micrographs of internal ingestion apparatus illustrate the connection between a gnathosomal tube and a pharyngeal lumen, which is surrounded by alternating dilator and constrictor muscles. Inspection of EPG signals showed the muscularized mite pharyngeal pump operates at a mean repetition rate of 4.5 cycles/s to ingest host fluids. Separate feeding events observed for mites numbered between 23 and 33 over approximately 16 h of recording, with each event lasting ~10 s. Feeding events were each separated by ~2 min. Consecutive feeding events separated by either locomotion or prolonged periods of quiescence were grouped into feeding bouts, which ranged in number from one to six. Statistical analyses of EPG data revealed that feeding events were prolonged for mites having lower pharyngeal pump frequencies, and mites having prolonged feeding events went unfed for significantly more time between feeding events. These results suggest that mites may adjust behaviors to meet limitations of their feeding apparatus to acquire similar amounts of food. Data reported here help to provide a more robust view of Varroa mite feeding than those previously reported and are both reminiscent of, as well as distinct from, some other acarines and fluid-feeding insects