629 research outputs found
Recommended from our members
Shipping container response to three severe railway accident scenarios
The probability of damage and the potential resulting hazards are analyzed for a representative rail shipping container for three severe rail accident scenarios. The scenarios are: (1) the rupture of closure bolts and resulting opening of closure lid due to a severe impact, (2) the puncture of container by an impacting rail-car coupler, and (3) the yielding of container due to side impact on a rigid uneven surface. The analysis results indicate that scenario 2 is a physically unreasonable event while the probabilities of a significant loss of containment in scenarios 1 and 3 are extremely small. Before assessing the potential risk for the last two scenarios, the uncertainties in predicting complex phenomena for rare, high- consequence hazards needs to be addressed using a rigorous methodology
Laser ablation loading of a radiofrequency ion trap
The production of ions via laser ablation for the loading of radiofrequency
(RF) ion traps is investigated using a nitrogen laser with a maximum pulse
energy of 0.17 mJ and a peak intensity of about 250 MW/cm^2. A time-of-flight
mass spectrometer is used to measure the ion yield and the distribution of the
charge states. Singly charged ions of elements that are presently considered
for the use in optical clocks or quantum logic applications could be produced
from metallic samples at a rate of the order of magnitude 10^5 ions per pulse.
A linear Paul trap was loaded with Th+ ions produced by laser ablation. An
overall ion production and trapping efficiency of 10^-7 to 10^-6 was attained.
For ions injected individually, a dependence of the capture probability on the
phase of the RF field has been predicted. In the experiment this was not
observed, presumably because of collective effects within the ablation plume.Comment: submitted to Appl. Phys. B., special issue on ion trappin
Recommended from our members
Evaluation of impact tests of solid steel billet onto concrete pads, and application to generic ISFSI storage cask for tipover and side drop
Twelve tests were performed at LLNL to assess loading conditions on a spent fuel casts for side drops, end drops and tipover events. The tests were performed with a 1/3-scale model concrete pad to benchmark the structural analysis code DYNA3D. The side drop and tipover test results are discussed in this report. The billet and test pad were modified with DYNA3D using material properties and techniques used in earlier tests. The peak or maximum deceleration test results were compared to the simulated analytical results. It was concluded that an analytical model based on DYNA3D code and has been adequately benchmarked for this type of application. A generic or represented cask was modified with the DYNA3D code and evaluated for ISFSI side drop and tipover events. The analytical method can be applied to similar casks to estimate impact loads on storage casks resulting from low-velocity side or tip impacts onto concrete storage pads
Recommended from our members
Summary and evaluation of steel billet testing
Tests were performed at Sandia National Laboratories (SNL) and Lawrence Livermore National Laboratory (LLNL) to assess loading conditions on a spent fuel storage cask for end drops, side drops and tipover events. The tests were performed with a 1/3-scale model billet and a 1/3-scale model concrete pad, and included a variety of substrate materials. A NUREG/CR report was prepared for the Nuclear Regulatory Commission (NRC) and provides a summary and an evaluation of all the billet testing conducted. This paper provides a description of the testing and analysis method, and a summary of the results. A generic or representative cask was modeled with the benchmarked finite element analysis approach and evaluated for ISFSI end and side drops and tipover events. The analytical method can be applied to similar casks to estimate deceleration loads on storage casks resulting from low-velocity drop or tipover impacts onto concrete storage pads
Non-destructive, dynamic detectors for Bose-Einstein condensates
We propose and analyze a series of non-destructive, dynamic detectors for
Bose-Einstein condensates based on photo-detectors operating at the shot noise
limit. These detectors are compatible with real time feedback to the
condensate. The signal to noise ratio of different detection schemes are
compared subject to the constraint of minimal heating due to photon absorption
and spontaneous emission. This constraint leads to different optimal operating
points for interference-based schemes. We find the somewhat counter-intuitive
result that without the presence of a cavity, interferometry causes as much
destruction as absorption for optically thin clouds. For optically thick
clouds, cavity-free interferometry is superior to absorption, but it still
cannot be made arbitrarily non-destructive . We propose a cavity-based
measurement of atomic density which can in principle be made arbitrarily
non-destructive for a given signal to noise ratio
Supersymmetric effects in top quark decay into polarized W-boson
We investigate the one-loop supersymmetric QCD (SUSY-QCD) and electroweak
(SUSY-EW) corrections to the top quark decay into a b-quark and a longitudinal
or transverse W-boson. The corrections are presented in terms of the
longitudinal ratio \Gamma(t-->W_L b)/\Gamma(t--> W b) and the transverse ratio
\Gamma(t-->W_- b)/\Gamma(t--> W b). In most of the parameter space, both
SUSY-QCD and SUSY-EW corrections to these ratios are found to be less than 1%
in magnitude and they tend to have opposite signs. The corrections to the total
width \Gamma(t-->W b) are also presented for comparison with the existing
results in the literature. We find that our SUSY-EW corrections to the total
width differ significantly from previous studies: the previous studies give a
large correction of more than 10% in magnitude for a large part of the
parameter space while our results reach only few percent at most.Comment: Version in PRD (explanation and refs added
Protecting the primordial baryon asymmetry in the seesaw model compatible with WMAP and KamLAND
We require that the primordial baryon asymmetry is not washed out in the
seesaw model compatible with the recent results of WMAP and the neutrino
oscillation experiments including the first results of KamLAND. We find that
only the case of the normal neutrino mass hierarchy with an approximate
-symmetry satisfies the requirement. We further derive, depending on the
signs of neutrino mass eigenvalues, three types of neutrino mass matrixes,
where the values of each element are rather precisely fixed.Comment: 21pages; added reference
PREDICTING THE SUMMER TEMPERATURE OF SMALL STREAMS IN SOUTHWESTERN WISCONSIN 1
One of the biggest challenges in managing cold water streams in the Midwest is understanding how stream temperature is controlled by the complex interactions among meteorologic processes, channel geometry, and ground water inflow. Inflow of cold ground water, shade provided by riparian vegetation, and channel width are the most important factors controlling summer stream temperatures. A simple screening model was used to quantitatively evaluate the importance of these factors and guide management decisions. The model uses an analytical solution to the heat transport equation to predict steady-state temperature throughout a stream reach. The model matches field data from four streams in southwestern Wisconsin quite well (typically within 1°C) and helps explain the observed warming and cooling trends along each stream reach. The distribution of ground water inflow throughout a stream reach has an important influence on stream temperature, and springs are especially effective at providing thermal refuge for fish. Although simple, this model provides insight into the importance of ground water and the impact different management strategies, such as planting trees to increase shade, may have on summer stream temperature.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/74032/1/j.1752-1688.2005.tb03714.x.pd
Functional diversity of chemokines and chemokine receptors in response to viral infection of the central nervous system.
Encounters with neurotropic viruses result in varied outcomes ranging from encephalitis, paralytic poliomyelitis or other serious consequences to relatively benign infection. One of the principal factors that control the outcome of infection is the localized tissue response and subsequent immune response directed against the invading toxic agent. It is the role of the immune system to contain and control the spread of virus infection in the central nervous system (CNS), and paradoxically, this response may also be pathologic. Chemokines are potent proinflammatory molecules whose expression within virally infected tissues is often associated with protection and/or pathology which correlates with migration and accumulation of immune cells. Indeed, studies with a neurotropic murine coronavirus, mouse hepatitis virus (MHV), have provided important insight into the functional roles of chemokines and chemokine receptors in participating in various aspects of host defense as well as disease development within the CNS. This chapter will highlight recent discoveries that have provided insight into the diverse biologic roles of chemokines and their receptors in coordinating immune responses following viral infection of the CNS
All-particle cosmic ray energy spectrum measured with 26 IceTop stations
We report on a measurement of the cosmic ray energy spectrum with the IceTop
air shower array, the surface component of the IceCube Neutrino Observatory at
the South Pole. The data used in this analysis were taken between June and
October, 2007, with 26 surface stations operational at that time, corresponding
to about one third of the final array. The fiducial area used in this analysis
was 0.122 km^2. The analysis investigated the energy spectrum from 1 to 100 PeV
measured for three different zenith angle ranges between 0{\deg} and 46{\deg}.
Because of the isotropy of cosmic rays in this energy range the spectra from
all zenith angle intervals have to agree. The cosmic-ray energy spectrum was
determined under different assumptions on the primary mass composition. Good
agreement of spectra in the three zenith angle ranges was found for the
assumption of pure proton and a simple two-component model. For zenith angles
{\theta} < 30{\deg}, where the mass dependence is smallest, the knee in the
cosmic ray energy spectrum was observed between 3.5 and 4.32 PeV, depending on
composition assumption. Spectral indices above the knee range from -3.08 to
-3.11 depending on primary mass composition assumption. Moreover, an indication
of a flattening of the spectrum above 22 PeV were observed.Comment: 38 pages, 17 figure
- âŠ