1,894 research outputs found
Hierarchical Up/Down Routing Architecture for Ethernet backbones and campus networks
We describe a new layer two distributed and scalable routing architecture. It uses an automatic hierarchical node identifier assignment mechanism associated to the rapid spanning tree protocol. Enhanced up/down mechanisms are used to prohibit some turns at nodes to break cycles, instead of blocking links like the spannning tree protocol does. The protocol performance is similar or better than other turn prohibition algorithms recently proposed with lower complexity O(Nd) and better scalability. Simulations show that the fraction of prohibited turns over random networks is less than 0.2. The effect of root bridge election on the performance of the protocol is limited both in the random and regular networks studied. The use of hierarchical, tree-descriptive addresses simplifies the routing, and avoids the need of all nodes having a global knowleddge of the network topology. Routing frames through the hierarchical tree at very high speed is possible by progressive decoding of frame destination address, without routing tables or port address learning. Coexistence with standard bridges is achieved using combined devices: bridges that forward the frames having global destination MAC addresses as standard bridges and frames with local MAC frames with the proposed protocol.Publicad
Can the life-history strategy explain the success of the exotic trees Ailanthus altissima and Robinia pseudoacacia in Iberian floodplain forests?
Ailanthus altissima and Robina pseudoacacia are two successful invasive species of floodplains in central Spain. We aim to explain their success as invaders in this habitat by exploring their phenological pattern, vegetative and sexual reproductive growth, and allometric relations, comparing them with those of the dominant native tree Populus alba. During a full annual cycle we follow the timing of vegetative growth, flowering, fruit set, leaf abscission and fruit dispersal. Growth was assessed by harvesting two-year old branches at the peaks of vegetative, flower and fruit production and expressing the mass of\ud
current-year leaves, stems, inflorescences and infrutescences per unit of previous-year stem mass. Secondary growth was\ud
assessed as the increment of trunk basal area per previous-year basal area. A. altissima and R. pseudoacacia showed\ud
reproductive traits (late flowering phenology, insect pollination, late and long fruit set period, larger seeds) different from P. alba and other native trees, which may help them to occupy an empty reproductive niche and benefit from a reduced competition for the resources required by reproductive growth. The larger seeds of the invaders may make them less dependent on gaps for seedling establishment. If so, these invaders may benefit from the reduced gap formation rate of flood-regulated rivers of the study region. The two invasive species showed higher gross production than the native, due to the higher size of pre-existing stems rather than to a faster relative growth rate. The latter was only higher in A. altissima for stems, and in R. pseudoacacia for reproductive organs. A. altissima and R. pseudoacacia showed the lowest and highest reproductive/vegetative mass ratio, respectively. Therefore, A. altissima may outcompete native P. alba trees thanks to a high potential to overtop coexisting plants whereas R. pseudoacacia may do so by means of a higher investment in sexual reproduction
ElevationSys
ElevationSys es un sistema de gestión web para el proceso de producción de una empresa de ascensores. El sistema contiene diferentes tipos de usuarios de los departamentos de la empresa y esta administrado por unos flujos con relación de dependencia que van marcando el ritmo del trabajo. Este backOffice está pensado para abarcar todo el procedimiento de la fábrica, desde que se presenta la oferta al cliente hasta que se entrega la máquina.ElevationSys és un sistema de gestió web per al procés de producció d'una empresa d'ascensors. El sistema conté diferents tipus d'usuaris dels departaments de l'empresa i està administrat per uns fluxos en relació de dependència que van marcant el ritme de la feina. Aquest BackOffice està pensat per abastar tot el procedimient de la fàbrica, des que es presenta l'oferta al client fins que es lliura la màquina.ElevationSys is a web management system for the production process of an elevator company. The system contains different types of users from the departments of the company and is administered by a relation of dependence flows that are setting the pace of work. The BackOffice is designed to cover the whole process of the factory, from the offer presented to the client until the machine is delivered
In-situ density estimation by four nondestructive techniques on Norway spruce from built-in wood structures
Needle penetration resistance (NPR), screw withdrawal resistance (SWR), core drilling (CD) and drilling chips extraction (DCE) are nondestructive and semi-destructive techniques used to estimate density in timber structures. In most of the previous studies, these techniques were tested in clear sawn timber and clear specimens. The goal of the present paper is to study the relationship between density and these techniques by means of five different devices in whole pieces of timber from built-in engineering structures, which are from 12 4.5-m long structural timber joists of Norway spruce from a 19th century building in Barcelona (Catalonia, Spain). Although determination coefficients (R2) for density estimation models were lower than those from clear timber, the results obtained confirmed that these four techniques are suitable for in-situ density estimation of woods in buildings. The best results were obtained by CD (the bigger the bit, the higher the correlation), followed by DCE, and SWR. The worst correlation was found for NPR devices, but the results could be probably improved with more measurements.Peer ReviewedPostprint (published version
Open-globe-injury: A single center Spanish retrospective 5-year cohort study.
Purpose:
To review and analyze the epidemiological profile, clinical characteristics and visual outcomes in patients attended for traumatic open globe injury (OGI) at our hospital over a 5-year period.
Design:
Retrospective chart review study.
Methods:
Retrospective analysis of all patients attended at Fundación Jiménez Díaz University Hospital for OGI between 2011 and 2015. Data from 104 patients including demographics, ocular examination, medical and surgical treatment, visual outcomes, and complications were analyzed.
Results:
Most patients were male (79.8%) and the median age at the time of injury was 41 years (interquartile range 31.5–58 years). Work-related accidents represent more than half of the cases and their main mechanism was penetrating trauma or foreign body. This type of accident had good prognosis (median final visual acuity in decimal scale 0.8; interquartile range 0.4–1). Falls were the second most common cause of OGI, predominantly affecting senior women (50%), with a high incidence of ocular rupture (50%) and associating a poor visual prognosis (median final visual acuity 0.01; interquartile range 0–0.5). There was a strong correlation (0.75; p < 0.001) between ocular trauma score (OTS) and final best corrected visual acuity.
Conclusions:
Two different patterns of OGI were identified in our sample. Work-related trauma in young males was the most common form of OGI and was associated with good prognosis. However, falls in senior women were associated with poor prognosis.pre-print484 K
Pandeo simultáneo de pilas de puente: aplicación a un cálculo sísmico tipo push-over de las pilas del puente atirantado de Bucaramanga en Colombia
Se presenta el algoritmo implementado para probar la estabilidad de pilas de puente de forma global, es decir, integradas en la estructura más general del puente. El método planteado constituye una alternativa más general al método habitual de leyes momento-curvatura. Se describe su aplicación al puente atirantado de Bucaramanga de 292 m de luz y pilas de 50 y 70 m de altura (altura total de la torre mayor de 133 m). Su aplicación, considerando confinamiento en determinadas secciones de pilas permite tener en cuenta la generación de rótulas plásticas y demostrar el grado de ductilidad alcanzado en la estructura, constituyendo una aplicación practica del método de calculo sísmico por capacidad o push-over a pilas de puente.The relevance of this article is threefold: 1st It presents in detail the algorithm used to test the stability of bridge piers in a global model, i.e., integrated in the most general structure of the bridge. 2nd The method put forward represents a more general alternative to the commonly used moment-curvature method of sectional analysis for biaxial bending under constant axial force. 3rd It describes the algorithm’s application to a 292 m span cable-stayed bridge with piers of 50 and 70 m in height (total height of the biggest tower 133 m). Its application, considering confinement in some particular cross-sections of piers permits the taking into account of “plastic hinges” phenomena due to earthquakes and demonstrates the degree of ductility achieved in the structure. This constitutes a practical application of the push-over method to bridge piers
Pandeo simultáneo de pilas de puente: aplicación a un cálculo sísmico tipo push-over de las pilas del puente atirantado de Bucaramanga en Colombia
Se presenta el algoritmo implementado para probar la estabilidad de pilas de puente de forma global, es decir, integradas en la estructura más general del puente. El método planteado constituye una alternativa más general al método habitual de leyes momento-curvatura. Se describe su aplicación al puente atirantado de Bucaramanga de 292 m de luz y pilas de 50 y 70 m de altura (altura total de la torre mayor de 133 m). Su aplicación, considerando confinamiento en determinadas secciones de pilas permite tener en cuenta la generación de rótulas plásticas y demostrar el grado de ductilidad alcanzado en la estructura, constituyendo una aplicación practica del método de calculo sísmico por capacidad o push-over a pilas de puente.The relevance of this article is threefold: 1st It presents in detail the algorithm used to test the stability of bridge piers in a global model, i.e., integrated in the most general structure of the bridge. 2nd The method put forward represents a more general alternative to the commonly used moment-curvature method of sectional analysis for biaxial bending under constant axial force. 3rd It describes the algorithm’s application to a 292 m span cable-stayed bridge with piers of 50 and 70 m in height (total height of the biggest tower 133 m). Its application, considering confinement in some particular cross-sections of piers permits the taking into account of “plastic hinges” phenomena due to earthquakes and demonstrates the degree of ductility achieved in the structure. This constitutes a practical application of the push-over method to bridge piers
On the performance of a tunable grating-based high sensitivity unidirectional plasmonic sensor
Optical biosensing is currently an intensively active research area, with an increasing demand of highly selective, sensitivity-enhanced and low-cost devices where different plasmonic approaches have been developed. In this work we propose a tunable optimized grating-based gold metasurface that can act both as a high sensitivity sensor device (up to 1500 nm/RIU) and as an unidirectional plasmon source. The theory behind surface plasmon polariton generation is recalled to thoroughly understand the influence that every parameter of the grating source has on the performance of the proposed device. The results and conclusions discussed here offer a key step toward the design of biosensors based on excitation of surface plasmons polaritons by grating-based structures or in the process of creating new nanophotonic circuit devices.We gratefully acknowledge financial support from Spanish national project INMUNOTERMO (No. PGC2018-096649-B-I). J. G-C. thanks the Ministry of science of Spain for his FPI grant. G. S. thanks the Ministry of education for his collaboration grant and P.A. acknowledges funding for a Ramon y Cajal Fellowship (Grant No. RYC-2016-20831)
Can the life-history strategy explain the success of the exotic trees Ailanthus altissima and Robinia pseudoacacia in Iberian floodplain forests?
Ailanthus altissima and Robina pseudoacacia are two successful invasive species of floodplains in central Spain. We aim to explain their success as invaders in this habitat by exploring their phenological pattern, vegetative and sexual reproductive growth, and allometric relations, comparing them with those of the dominant native tree Populus alba. During a full annual cycle we follow the timing of vegetative growth, flowering, fruit set, leaf abscission and fruit dispersal. Growth was assessed by harvesting two-year old branches at the peaks of vegetative, flower and fruit production and expressing the mass of
current-year leaves, stems, inflorescences and infrutescences per unit of previous-year stem mass. Secondary growth was
assessed as the increment of trunk basal area per previous-year basal area. A. altissima and R. pseudoacacia showed
reproductive traits (late flowering phenology, insect pollination, late and long fruit set period, larger seeds) different from P. alba and other native trees, which may help them to occupy an empty reproductive niche and benefit from a reduced competition for the resources required by reproductive growth. The larger seeds of the invaders may make them less dependent on gaps for seedling establishment. If so, these invaders may benefit from the reduced gap formation rate of flood-regulated rivers of the study region. The two invasive species showed higher gross production than the native, due to the higher size of pre-existing stems rather than to a faster relative growth rate. The latter was only higher in A. altissima for stems, and in R. pseudoacacia for reproductive organs. A. altissima and R. pseudoacacia showed the lowest and highest reproductive/vegetative mass ratio, respectively. Therefore, A. altissima may outcompete native P. alba trees thanks to a high potential to overtop coexisting plants whereas R. pseudoacacia may do so by means of a higher investment in sexual reproduction
- …