2,865 research outputs found
The electrorheology of suspensions consisting of Na-Fluorohectorite synthetic clay particles in silicon oil
Under application of an electric field greater than a triggering electric
field kV/mm, suspensions obtained by dispersing particles of the
synthetic clay fluoro-hectorite in a silicon oil, aggregate into chain- and/or
column-like structures parallel to the applied electric field. This
micro-structuring results in a transition in the suspensions' rheological
behavior, from a Newtonian-like behavior to a shear-thinning rheology with a
significant yield stress. This behavior is studied as a function of particle
volume fraction and strength of the applied electric field, . The steady
shear flow curves are observed to scale onto a master curve with respect to
, in a manner similar to what was recently found for suspensions of laponite
clay [42]. In the case of Na-fluorohectorite, the corresponding dynamic yield
stress is demonstrated to scale with respect to as a power law with an
exponent , while the static yield stress inferred from
constant shear stress tests exhibits a similar behavior with . The suspensions are also studied in the framework of thixotropic fluids:
the bifurcation in the rheology behavior when letting the system flow and
evolve under a constant applied shear stress is characterized, and a
bifurcation yield stress, estimated as the applied shear stress at which
viscosity bifurcation occurs, is measured to scale as with to 0.6. All measured yield stresses increase with the particle
fraction of the suspension. For the static yield stress, a scaling law
, with , is found. The results are found to be
reasonably consistent with each other. Their similarities with-, and
discrepancies to- results obtained on laponite-oil suspensions are discussed
Nonlinear ER effects in an ac applied field
The electric field used in most electrorheological (ER) experiments is
usually quite high, and nonlinear ER effects have been theoretically predicted
and experimentally measured recently. A direct method of measuring the
nonlinear ER effects is to examine the frequency dependence of the same
effects. For a sinusoidal applied field, we calculate the ac response which
generally includes higher harmonics. In is work, we develop a multiple image
formula, and calculate the total dipole moments of a pair of dielectric
spheres, embedded in a nonlinear host. The higher harmonics due to the
nonlinearity are calculated systematically.Comment: Presented at Conference on Computational Physics (CCP2000), held at
Gold Coast, Australia from 3-8, December 200
Sharp transition towards shared vocabularies in multi-agent systems
What processes can explain how very large populations are able to converge on
the use of a particular word or grammatical construction without global
coordination? Answering this question helps to understand why new language
constructs usually propagate along an S-shaped curve with a rather sudden
transition towards global agreement. It also helps to analyze and design new
technologies that support or orchestrate self-organizing communication systems,
such as recent social tagging systems for the web. The article introduces and
studies a microscopic model of communicating autonomous agents performing
language games without any central control. We show that the system undergoes a
disorder/order transition, going trough a sharp symmetry breaking process to
reach a shared set of conventions. Before the transition, the system builds up
non-trivial scale-invariant correlations, for instance in the distribution of
competing synonyms, which display a Zipf-like law. These correlations make the
system ready for the transition towards shared conventions, which, observed on
the time-scale of collective behaviors, becomes sharper and sharper with system
size. This surprising result not only explains why human language can scale up
to very large populations but also suggests ways to optimize artificial
semiotic dynamics.Comment: 12 pages, 4 figure
Polarization Issues with High Power Injection and Low Power Emission in Fusion Experiments
All tokamak experiments using ECCD require setting of the beam elliptical polarization for proper coupling to the plasma. This is done either in the matching optics unit (MOU) at the output of the gyrotron, or in a couple of miter bends of the transmission line. Similarly, oblique ECE receivers require selection of the correct elliptical polarization to provide localized measurements. For the TCV tokamak at the CRPP, gyrotron and oblique-ECE polarizers are characterized during either high- or low- power testing of equipment: for the gyrotrons the behaviour is determined at a single frequency, but for the oblique-ECE the broadband response is needed. These characteristics are included in the calibration database and used during subsequent analysis of the power coupling to, or from, the sources (gyrotron, plasma, or low power transmitting antenna). A more detailed characterization has been carried out (at low power) with the MOU for the EU, 170GHz, 2MW, gyrotron prototype for ITER. This paper discusses the methodology and results of these measurements, as well as a review of nearly a decade's worth of experimental data from the 6 gyrotron, 3MW, 82.6GHz TCV system. In particular, the consistency between the calibrations and the subsequent data from tokamak experiments is analysed
Kalman filter density reconstruction in ICRH discharges on ASDEX Upgrade
Plasma density is one of the key quantities that need to be controlled in real-time as it scales directly with fusion power and, if left uncontrolled, density limits can be reached leading to a disruption. On ASDEX Upgrade (AUG), the real-time measurements are the line-integrated density, measured by the interferometers, and the average density derived from the bremsstrahlung measured by spectroscopy. For control, these measurements are used to reconstruct the radial density profile using an extended Kalman filter (EKF). However, in discharges where ion cyclotron resonance heating (ICRH) is used, the measurements from the interferometers are corrupted and the reconstructed density is false. In this paper, the existing EKF implementation is improved, implemented and experimentally verified on AUG. The new EKF includes a new particle transport model in the prediction model RAPDENS as well as a new representation of ionization and recombination. Furthermore, an algorithm was introduced that is capable of detecting the corrupt diagnostics; this algorithm is based on the rate of change of the innovation residual. The changes to the RAPDENS observer resulted in better density reconstruction in ICRH discharges where corrupt measurement occur. The new version has been implemented on the real-time control system at AUG and functions properly in ICRH discharges.</p
Fast polarizers installation for ECRH and ECE in TCV
We report on the installation of fast polarizers for ECRH injection and ECE diagnostics, in the TCV tokamak. The main goal is to change the polarization during a plasma shot and react to changing conditions such as: plasma current and position, ECRH injection angles as well as ECE oblique observation angle and correlation ECE frequency. This will allow tracking of plasma variations, find optimum parameters to maximize ECRH absorption and improve the quality and consistency of ECE measurements. The polarization is varied using two fast polarizers, from General Atomics, positioned either in the evacuated transmission line for ECRH, or in a similar non-evacuated line near a real-time moveable directional antenna for ECE. A programmable driver is used to control a servo-motor and allows three operation modes during a plasma shot: fixed angle position, pre-programmed reference waveform and following of a real-time reference waveform. Preliminary tests of the motor controller achieved an 8 Hz bandwidth for a 4 +/-degrees amplitude motion and a 2.2 Hz bandwidth for a +/- 4 degrees amplitude motion. The fast polarizers are presently in the ECE system and the control hardware is being installed. (C) 2011 Elsevier B.V. All rights reserved
- …