1,962 research outputs found
Alignment positioning mechanism
An alignment positioning mechanism for correcting and compensating for misalignment of structures to be coupled is disclosed. The mechanism comprises a power screw with a base portion and a threaded shank portion. A mounting fixture is provided for rigidly coupling said base portion to the mounting interface of a supporting structure with the axis of the screw perpendicular thereto. A traveling ball nut threaded on the power screw is formed with an external annular arcuate surface configured in the form of a spherical segment and enclosed by a ball nut housing with a conforming arcuate surface for permitting gimballed motion thereon. The ball nut housing is provided with a mounting surface which is positionable in cooperable engagement with the mounting interface of a primary structure to be coupled to the supporting structure. Cooperative means are provided on the ball nut and ball nut housing, respectively, for positioning the ball nut and ball nut housing in relative gimballed position within a predetermined range of relative angular relationship whereby severe structural stresses due to unequal loadings and undesirable bending moments on the mechanism are avoided
Sterically Congested 2,6-Disubstituted Anilines from Direct C−N Bond Formation at an Iodine(III) Center
2,6-Disubstituted anilines are readily prepared from the direct reaction between amides and diaryliodonium salts. As demonstrated for 24 different examples, the reaction is of unusually broad scope with respect to the sterically congested arene and the nitrogen source, occurs without the requirement for any additional promoter, and proceeds through a direct reductive elimination at the iodine(III) center. The efficiency of the coupling procedure is further demonstrated within the short synthesis of a chemerin binding inhibitor
Comparison of the biotypes of Yersinia enterocolitica isolated from pigs, cattle and sheep at slaughter and from humans with yersiniosis in Great Britain during 1999-2000
Aims: To investigate the relationship between livestock carriage of Yersinia enterocolitica and human disease. The biotypes/serotypes of strains recovered from the faeces of pigs, cattle and sheep at slaughter during a national survey in Great Britain in 1999-2000, were compared with those of strains isolated from human cases of yersiniosis during the same period. Methods and Results: The faecal carriage of Y. enterocolitica by cattle, sheep and pigs at slaughter was 6.3, 10.7 and 26.1%, respectively. Yersinia enterocolitica biotype (BT) 1a was the most frequently isolated biotype from livestock (58%) and was the predominant biotype (53%) isolated from human cases over the same period. The main recognized pathogenic Y. enterocolitica biotype isolated from livestock was BT3 (O:5,27) (35% of sheep, 22% of pigs and 4% of cattle) but this biotype was not detected in any of the human isolates investigated. The major pathogenic biotypes of strains isolated from humans were BT3 (O:9) (24%) and BT4 (O:3) (19%) whereas of the veterinary isolates investigated, only pigs (11%) carried BT3 (O:9) strains. Conclusions: Because of significant overlaps in phenotypes of the veterinary and human strains it is not possible to comment on the correlation between host and pathogenicity, especially of biotype 1a. Significance and Impact of the Study: The data suggest that further investigations using methods with greater discriminatory power are required. However the data also suggests that pigs may be the primary reservoir for human pathogenic Y. enterocolitica infection
One-step determination of total iron using deferiprone or kojic acid as colorimetric reagents
The role of iron, one of the most common metals in the environment, is fundamental in many biological and geochemical processes, which determine its availability in the two main oxidation states Fe2+ and Fe3+. Its relevance in the environment, industrial applications, and human physiology, as well as in many other fields has constantly encouraged the development of analytical techniques for its accurate determination. Spectrophotometric methods are those most frequently applied for iron determination in real samples, with specific reagents for the two existing oxidation state right now. In the present work, two low-cost, non-toxic, colorimetric reagents are proposed: deferiprone and kojic acid. These compounds present peculiar features, in particular the formation of 1:3 complexes with Fe3+ of extremely high stability and absorptivity in a wide operative pH range. In this study, we show that both reagents can be used to measure the total iron content. Actually, the extremely low redox potential characterizing the FeL3 complexes permits to determine the total concentration of iron independently from the starting oxidation state, and assures the complete oxidation in presence of oxygen of any amount of Fe2+ to Fe3+ complexes. These features constitute a novelty in the analytical determination of total iron not requiring any pretreatment of the sample, contrary to the methods in use, devoted either to Fe3+ or to Fe2+, necessitating awkward and error generating oxidative or reductive processes. The analytical performance of the proposed spectrophotometric method has been evaluated for the full compliance with the Lambert-Beer law, the operative range of iron concentration, the influence of pH, and the interfering effects of other metal ions. Finally, it has been validated in terms of LoD, LoQ, linearity, precision, and trueness, and has been tested on total iron determination in natural water certified material and in two biological reference materials, human urine and serum
Double-Tuned Birdcage Radio Frequency Coil for 7 T MRI: Optimization, Construction and Workbench Validation
The aim of the present study is the optimization, construction, and workbench validation of a double-tuned 1H- 23Na volume radio frequency (RF) coil suitable for human head imaging at
7 T, based on the birdcage geometry. The birdcage-like design which is considered is the four-ring model, in which two standard birdcage-like structures with the same diameters are nested along the longitudinal axis. Simulations based on Maxwell’s equations are performed to evaluate the RF magnetic field homogeneity and the RF coil efficiency varying the coil geometrical parameters. The RF magnetic field homogeneity is evaluated both on the transverse (z = 0) and longitudinal (y = 0) planes without performing the impedance matching procedure, so that the RF coil symmetry is not perturbed by the matching network. The RF coil efficiency is instead dependent on the effective coil input RF power, and it is evaluated after matching the coil, so that the reflected power is minimized, assuming that the stimulation power is totally delivered to the RF coil. Considering the simulation results and the target application, the useful RF coil geometrical parameters are fixed. The four-ring model, which showed the best performances, has been built and tested on a workbench, using a cylindrical phantom filled with a 0.05 M saline solution as load. This provides the first example of a four-ring realization intended 1H- 23Na for human head imaging at 7 T
As(III, V) Uptake from Nanostructured Iron Oxides and Oxyhydroxides: The Complex Interplay between Sorbent Surface Chemistry and Arsenic Equilibria
Iron oxides/oxyhydroxides, namely maghemite, iron oxide-silica composite, akaganeite, and ferrihydrite, are studied for AsV and AsIII removal from water in the pH range 2–8. All sorbents were characterized for their structural, morphological, textural, and surface charge properties. The same experimental conditions for the batch tests permitted a direct comparison among the sorbents, particularly between the oxyhydroxides, known to be among the most promising As-removers but hardly compared in the literature. The tests revealed akaganeite to perform better in the whole pH range for AsV (max 89 mg g−1 at pH0 3) but to be also efficient toward AsIII (max 91 mg g−1 at pH0 3– 8), for which the best sorbent was ferrihydrite (max 144 mg g−1 at pH0 8). Moreover, the study of the sorbents’ surface chemistry under contact with arsenic and arsenic-free solutions allowed the understanding of its role in the arsenic uptake through electrophoretic light scattering and pH measurements. Indeed, the sorbent’s ability to modify the starting pH was a crucial step in determining the removal of performances. The AsV initial concentration, contact time, ionic strength, and presence of competitors were also studied for akaganeite, the most promising remover, at pH0 3 and 8 to deepen the uptake mechanism
A family of kojic acid derivatives aimed to remediation of Pb2+ and Cd2+
The present work analyzes the complex formation ability towards Pb2+ and Cd2+ of a series of kojic acid derivatives that join the chelating properties of the pyrone molecules and those of polyamines, with the aim of evaluating how the different effects of oxygen and nitrogen coordinating groups act on the stability of metal complexes. Experimental research is carried out using potentiometric and spectrophotometric techniques supported by 1H and 13C NMR spectroscopy and DFT calculations. Actually, a different coordination mechanism toward Pb2+ and Cd2+ was proved: in the case of Pb2+, coordination takes place exclusively via the oxygen atoms, while the contribute of the nitrogen atoms appears relevant in the case of Cd2+. Lead complexes of all the studied ligands are characterized by significantly stronger stability than those of cadmium. Finally, on the basis of the measured complex formation stabilities, some of the proposed molecules seems promising effective ligands for lead and cadmium ion decorporation from polluted soils or waste waters
Intrauterine versus post-mortem magnetic resonance in second trimester termination of pregnancy for central nervous system abnormalities
Objective: To evaluate if limiting factors of intrauterine magnetic resonance imaging (iuMRI) performed in the early second trimester of pregnancy (19\u201323 weeks) affect its accuracy in comparison to post-mortem MRI (pmMRI) in fetuses that underwent termination of pregnancy (TOP) for central nervous system (CNS) defects. Study design: This is a secondary analysis of a 10 years prospective observational study. Cases of TOP < 23 weeks for CNS malformation that had undergone neurosonography (NSG), iuMRI, pmMRI and autopsy were included. The agreement between iuMRI and pmMRI was calculated. The autopsy represented the gold-standard. Results: Overall, 143 TOPs for fetal congenital anomaly underwent the post-mortem diagnostic protocol. Of these, 31 cases underwent iuMRI and pmMRI for CNS abnormality. Three cases were excluded due to brain autolysis at autopsy. Corpus callosum defects were the most represented (16/28; 57 %). In only one case of posterior fossa defect, pmMRI identified the presence of vermian hypoplasia not diagnosed at iuMRI. In 2 cases (7%), iuMRI added clinically relevant additional findings to NSG, that were posteriorly confirmed by pmMRI. Conclusions: The study shows that, at 19\u201323 weeks and for CNS defects, limiting factors that might influence the performance of iuMRI have little influence on iuMRI accuracy. This finding is particularly important for professionals who work in countries with legal bound for TOP in the early second trimester
- …