Measurement of Upper Limb Range of Motion Using Wearable Sensors: A Systematic Review.

Background: Wearable sensors are portable measurement tools that are becoming increasingly popular for the measurement of joint angle in the upper limb. With many brands emerging on the market, each with variations in hardware and protocols, evidence to inform selection and application is needed. Therefore, the objectives of this review were related to the use of wearable sensors to calculate upper limb joint angle. We aimed to describe (i) the characteristics of commercial and custom wearable sensors, (ii) the populations for whom researchers have adopted wearable sensors, and (iii) their established psychometric properties. Methods: A systematic review of literature was undertaken using the following data bases: MEDLINE, EMBASE, CINAHL, Web of Science, SPORTDiscus, IEEE, and Scopus. Studies were eligible if they met the following criteria: (i) involved humans and/or robotic devices, (ii) involved the application or simulation of wearable sensors on the upper limb, and (iii) calculated a joint angle. Results: Of 2191 records identified, 66 met the inclusion criteria. Eight studies compared wearable sensors to a robotic device and 22 studies compared to a motion analysis system. Commercial (n = 13) and custom (n = 7) wearable sensors were identified, each with variations in placement, calibration methods, and fusion algorithms, which were demonstrated to influence accuracy. Conclusion: Wearable sensors have potential as viable instruments for measurement of joint angle in the upper limb during active movement. Currently, customised application (i.e. calibration and angle calculation methods) is required to achieve sufficient accuracy (error < 5°). Additional research and standardisation is required to guide clinical application

Comparison of diagnostic tests for the detection of Brucella spp. in camel sera

<p>Abstract</p> <p>Background</p> <p>Brucellosis in livestock causes enormous losses for economies of developing countries and poses a severe health risk to consumers of dairy products. Little information is known especially on camel brucellosis and its impact on human health. For surveillance and control of the disease, sensitive and reliable detection methods are needed. Although serological tests are the mainstay of diagnosis in camel brucellosis, these tests have been directly transposed from cattle without adequate validation. To date, little information on application of real-time PCR for detection of <it>Brucella </it>in camel serum is available. Therefore, this study was performed to compare the diagnostic efficiency of different serological tests and real-time PCR in order to identify the most sensitive, rapid and simple combination of tests for detecting <it>Brucella </it>infection in camels.</p> <p>Findings</p> <p>A total of 895 serum samples collected from apparently healthy Sudanese camels was investigated. Sudan is a well documented endemic region for brucellosis with cases in humans, ruminants, and camels. Rose Bengal Test (RBT), Complement Fixation Test (CFT), Slow Agglutination Test (SAT), Competitive Enzyme Linked Immunosorbant Assay (cELISA) and Fluorescence Polarization Assay (FPA) as well as real-time PCR were used. Our findings revealed that <it>bcsp31 </it>kDa real-time PCR detected <it>Brucella </it>DNA in 84.8% (759/895) of the examined samples, of which 15.5% (118/759) were serologically negative. Our results show no relevant difference in sensitivity between the different serological tests. FPA detected the highest number of positive cases (79.3%) followed by CFT (71.4%), RBT (70.7%), SAT (70.6%) and cELISA (68.8%). A combination of real-time PCR with one of the used serological tests identified brucellosis in more than 99% of the infected animals. 59.7% of the examined samples were positive in all serological tests and real-time PCR. A subpopulation of 6.8% of animals was positive in all serological tests but negative in real-time PCR assays. The high percentage of positive cases in this study does not necessarily reflect the seroprevalence of the disease in the country but might be caused by the fact that the camels were imported from brucellosis infected herds of Sudan, accidentally. Seroprevalence of brucellosis in camels should be examined in confirmatory studies to evaluate the importance of brucellosis in this animal species.</p> <p>Conclusion</p> <p>We suggest combining <it>bcsp31 </it>real-time PCR with either FPA, CFT, RBT or SAT to screen camels for brucellosis.</p

Genetic Polymorphism in a VEGF-Independent Angiogenesis Gene ANGPT1 and Overall Survival of Colorectal Cancer Patients after Surgical Resection

Background The VEGF-independent angiogenic signaling plays an important role in the development of colorectal cancer (CRC). However, its implication in the clinical outcome of CRC has not been reported. This study aimed to investigate the association between genetic variations in several major VEGF-independent signaling pathway genes and the overall survival of CRC patients. Methods Seven single nucleotide polymorphisms (SNPs) in four important VEGF-independent angiogenic genes (ANGPT1, AMOT, DLL4 and ENG) were genotyped in a Chinese population with 408 CRC patients. Results One SNP, rs1954727 in ANGPT1, was significantly associated with CRC overall survival. Compared to patients with the homozygous wild-type genotype of rs1954727, those with heterozygous and homozygous variant genotypes exhibited a favorable overall survival with a hazard ratio (HR) of 0.89 (95% confidence interval [CI] 0.55–1.43, P = 0.623), and 0.32 (95% CI 0.15–0.71, P = 0.005), respectively (P trend = 0.008). In stratified analysis, this association remained significant in patients receiving chemotherapy (P trend = 0.012), but not in those without chemotherapy. We further evaluated the effects of chemotherapy on CRC survival that was stratified by rs1954727 genotypes. We found that chemotherapy resulted in a significantly better overall survival in the CRC patients (HR = 0.44, 95% CI 0.26–0.75, P = 0.002), which was especially prominent in those patients with the heterozygous genotype of rs1954727 (HR = 0.45, 95%CI 0.22–0.92, P = 0.028). Conclusion Our data suggest that rs1954727 in ANGPT1 gene might be a prognostic biomarker for the overall survival of CRC patients, especially in those receiving chemotherapy, a finding that warrants validation in larger independent populations

Overview of biologically digested leachate treatment using adsorption

Biological process is effective in treating most biodegradable organic matter present in leachate; however, a significant amount of ammonia, metals and refractory organic compounds may still remain in this biologically digested leachate. This effluent cannot be released to receiving bodies until the discharge limit is met. Several physical/chemical processes have been practiced as post-treatment to remove the remaining pollutants including coagulation–flocculation, oxidation and adsorption. Adsorption is often applied in leachate treatment as it enhances removal of refractory organic compounds. This chapter will focus on works related to adsorption as one of the commonly used methods to treat biologically digested leachate further down to acceptable discharge limit

Overview of biologically digested leachate treatment using adsorption

Biological process is effective in treating most biodegradable organic matter present in leachate; however, a significant amount of ammonia, metals and refractory organic compounds may still remain in this biologically digested leachate. This effluent cannot be released to receiving bodies until the discharge limit is met. Several physical/chemical processes have been practiced as post-treatment to remove the remaining pollutants including coagulation–flocculation, oxidation and adsorption. Adsorption is often applied in leachate treatment as it enhances removal of refractory organic compounds. This chapter will focus on works related to adsorption as one of the commonly used methods to treat biologically digested leachate further down to acceptable discharge limit

A study on energy and environmental management techniques used in petroleum process industries

Petroleum process industries are one of the most energy- and emission-intensive sectors throughout the world. There are natural gas processing plant, crude oil and condensate fractionation plant, liquefied natural gas plant, liquefied petroleum gas plant, etc. that create environmental pollution by processing and handling of petroleum products. The study critically reviewed and discussed the energy and environmental management including pollution control of petroleum process industries of Bangladesh. They produce both gaseous (process gas, waste gas, etc.) and liquid (produced water, waste oil, grease, etc.) pollutants. The study found that the liquid pollutant like waste water is more hazardous and its treatment process is highly complicated due to its higher salinity, more corrosivity and grease-containing characteristics. As part of energy management, the rational use of energy and energy flow diagram of the petroleum industry is presented. Finally, a time frame measure which can be implemented in order to save energy is outlined. The study concluded that the rational use of energy and proper environmental management are essential for achieving energy and environmental sustainability of process industries. © 2018, Springer International Publishing AG, part of Springer Nature