Design, construction, and quality tests of the large Al-alloy mandrels for the CMS coil

The Compact Muon Solenoid (CMS) is one of the general-purpose detectors to be provided for the LHC project at CERN. The design field of the CMS superconducting magnet is 4 T, the magnetic length is 12.5 m and the free bore is 6 m. Almost all large indirectly cooled solenoids constructed to date (e.g., Zeus, Aleph, Delphi, Finuda, Babar) comprise Al-alloy mandrels fabricated by welding together plates bent to the correct radius. The external cylinder of CMS will consist of five modules having an inner diameter of 6.8 m, a thickness of 50 mm and an individual length of 2.5 m. It will be manufactured by bending and welding thick plates (75 mm) of the strain hardened aluminum alloy EN AW-5083-H321. The required high geometrical tolerances and mechanical strength (a yield strength of 209 MPa at 4.2 K) impose a critical appraisal of the design, the fabrication techniques, the welding procedures and the quality controls. The thick flanges at both ends of each module will be fabricated as seamless rolled rings, circumferentially welded to the body of the modules. The developed procedures and manufacturing methods will be validated by the construction of a prototype mandrel of full diameter and reduced length (670 mm). (7 refs)

Population of high-spin isomeric states following fragmentation of 238 U

Isomeric ratios have been determined for 23 metastable states identified in A?200 nuclei from Pt to Rn near the valley of stability following fragmentation of 238U. This includes high-spin states with angular momenta ranging from (39/2) to 25. The experimental results are discussed together with those of similar experiments performed in this mass region. Isomeric ratios are compared with theoretical predictions where the angular momentum of the fragment arises purely due to the angular momentum of nucleons removed from the projectile. The theoretical yield of low-spin states is generally overestimated. In these cases the assumption of 100% feeding of the isomer may require modification. However, the yield of high-spin isomeric states [Im ? (39/2)] is significantly underestimated and highlights the requirement for a more complete theoretical framework in relation to the generation of fragment angular momentum. The enhanced population of high-spin states reported here is advantageous to future studies involving isomeric beams at fragmentation facilities such as the Rikagaku Kenkyusho RI Beam Factory (Japan) and next-generation facilities at the Facility for Antiproton and Ion Research (Germany) and Facility for Rare Isotope Beams (USA). � 2013 American Physical Society

Magnetic coupling to the Advanced Virgo payloads and its impact on the low frequency sensitivity

We study the electromagnetic coupling of the Advanced Virgo (AdV) Input Mirror Payload (IMP) in response to a slowly time-varying magnetic field. As the problem is not amenable to analytical solution, we employ and validate a finite element (FE) analysis approach. The FE model is built to represent as faithfully as possible the real object and it has been validated by comparison with experimental measurements. The intent is to estimate the induced currents and the magnetic field in the neighbourhood of the payload. The procedure found 21 equivalent electrical configurations that are compatible with the measurements. These have been used to compute the magnetic noise contribution to the total AdV strain noise. At the current stage of development AdV seems to be unaffected by magnetic noise, but we foresee a non-negligible coupling once AdV reaches the design sensitivity.Comment: 8 pages, 8 figures, 2 table

Commissioning of the CMS Magnet

CMS (Compact Muon Solenoid) is one of the large experiments for the LHC at CERN. The superconducting magnet for CMS has been designed to reach a 4 T field in a free bore of 6 m diameter and 12.5 m length with a stored energy of 2.6 GJ at full current. The flux is returned through a 10 000 t yoke comprising of five wheels and two end caps composed of three disks each. The magnet was designed to be assembled and tested in a surface hall, prior to be lowered at 90 m below ground, to its final position in the experimental cavern. The distinctive feature of the cold mass is the four-layer winding, made from a reinforced and stabilized NbTi conductor. The design and construction was carried out by CMS participating institutes through technical and contractual endeavors. Among them CEA Saclay, INFN Genova, ETH Zurich, Fermilab, ITEP Moscow, University of Wisconsin and CERN. The construction of the CMS Magnet, and of the coil in particular, has been completed last year. The magnet has just been powered to full field achieving electrical commissioning. After a brief reminder of the design and construction the first results of the commissioning are reported in this paper

Schottky mass measurements of heavy neutron-rich nuclides in the element range 70\leZ \le79 at the ESR

Storage-ring mass spectrometry was applied to neutron-rich $^{197}$Au projectile fragments. Masses of $^{181,183}$Lu, $^{185,186}$Hf, $^{187,188}$Ta, $^{191}$W, and $^{192,193}$Re nuclei were measured for the first time. The uncertainty of previously known masses of $^{189,190}$W and $^{195}$Os nuclei was improved. Observed irregularities on the smooth two-neutron separation energies for Hf and W isotopes are linked to the collectivity phenomena in the corresponding nuclei.Comment: 10 pages, 9 figures, 2 table