1,432 research outputs found

    Operational modal analysis for the characterization of ancient water towers in Pompeii

    Get PDF
    In the framework of an investigation campaign carried out in June 2015 by the authors on four ancient water towers (10\u201320 BC) in the archaeological site of Pompeii, modal analysis and output-only identification techniques were employed to extract the dynamic properties in order to assess structural vulnerabilities and support numerical model updating. The four investigated towers (selected among the fourteen present within the archaeological site) are free-standing structures at least 6 m tall, belonging to the Castellum Aquae, i.e. the ancient aqueducts system of the city. During the Roman Age, until the destruction of Pompeii due to the volcanic eruption in 79 AD, water towers provided fresh water to houses, palaces and villas. This particular type of structures are classified as no. 1, 2, 3 and 4 by archaeological literature: no. 1 and 4 are made of soft stone masonry (tuff, limestone), while no. 2 and 3 are composed by brickwork masonry. The paper reports the outcomes of ambient vibration tests performed on four towers in terms of extracted modal parameters using various operational modal analysis techniques. Obtained data are then used to study numerically the soil-structure interaction problem and implement model updating procedures

    Calibration of the dynamic behaviour of incomplete structures in archeological sites: The case of Villa Diomede portico in Pompeii

    Get PDF
    This paper reports the research activities carried out on Villa Diomede in Pompeii, built during the "Pre-Roman period" (i.e. the 3rd century BC) and discovered between 1771 and 1774 during the archaeological excavations. It is one of the greatest private buildings of Pompeii and it is located on the western corner of the modern archeological site. Three levels compose the building: the ground floor, the lower quadriportico with a square plan and a series of colonnades on the four sides around the inner garden and the cryptoportico. Villa Diomede was damaged by the strong earthquake occurred in AD 63 that caused the collapse of the western pillars of the quadriportico and later damaged after the big eruption of Vesuvius in AD 79. In June 2015 a series of nondestructive tests (NDT) were carried out by the authors in order to obtain information on the state of conservation of the building and to assess its structural behavior. Direct and tomographic sonic pulse velocity tests, ground penetrating radar, endoscopies and operational modal analysis were performed on the remaining structural elements on the two levels of the Villa. The present paper reports the main outcomes and findings of ambient vibration tests implemented to extract the modal parameters in terms of eigenfrequencies, mode shapes and damping ratios. Operational modal analysis and output-only identification techniques were applied to single stone pillars of the quadriportico structure and then to the entire square colonnade of Villa Diomede. Results are then used to study the soil-structure interaction at a local level and extend the gained information for the numerical calibration of the whole structure. Thanks to this methodology a detailed model updating procedure of the quadriportico was performed to develop reliable numerical models for the implementation of advance structural and seismic analysis of this "incomplete" archaeological structure

    Dynamic identification of the Qutb Minar, New Delhi, India

    Get PDF
    Eu-India Economic Cross Cultural Programme “Improving the Seismic Resistance of Cultural Heritage Buildings” - Contract ALA-95-23-2003-077-122.Central Building Research Institute, Roorkee, India.Technical University of Catalonia, Barcelona, Spain.Archaeological Survey of India

    Efficiency of alternative intensity measures for the seismic assessment of monolithic free-standing columns

    Get PDF
    This paper deals with the dynamic response of a free-standing ancient column in the Roman Agora of Thessaloniki, Greece as a means to shed more light on the complex behaviour of rocking bodies under seismic excitation. Numerical analyses utilizing discrete element method were carried out with the use of multiple seismic records selected based on the disaggregation of the seismic hazard for the region of interest. To identify their impact on structural performance, earthquake Intensity Measures, such as Peak Ground Acceleration and Peak Ground Velocity are examined for the case of a column that sustained no visible permanent deformations during the Ms = 6.5 Thessaloniki earthquake of 1978. The analysis revealed a weak correlation of PGA and PGV with the response results and a significant influence of the mean frequency (fm) of the seismic motion. No coupling was found between the maximum displacement of the top during the oscillation and the permanent post-seismic deformations. The complementarity of both earthquake Intensity Measures in the structural vulnerability assessment is also depicted

    Investigations techniques carried out on the Qutb Minar, New Delhi, India

    Get PDF
    In the framework of the Eu-India Economic Cross Cultural Programme “Improving the Seismic Resistance of Cultural Heritage Buildings”, aimed at the preservation of ancient masonry structures with regard to the seismic risk, different NDT were applied to the Qutb Minar, New Delhi, India, in September 2005. The paper describes the different investigation techniques applied (Ambient Vibration and Pulse Sonic Velocity Tests), intended to define the dynamic response of the tower and to qualitatively define the masonry conditions. For the dynamic modal identification analysis different test equipments were used, in order to compare the data and to have more reliable results. The dynamic parameters resulted from the acquisition campaigns will be used to estimate the mechanical properties of the masonry walls and the boundary conditions of the structure, to be considered in successive seismic nonlinear analyses of the Qutb Minar, aimed at the assessment of the safety level of the construction

    Use of CR100 scale for session-RPE in soccer and interchangeability with CR10

    Full text link
    ©2016 Human Kinetics,Inc. Purpose: To examine the construct validity of the session rating perceived exertion (s-RPE) assessed with the Borg CR100® scale to measure training loads in elite soccer and to examine if the CR100® is interchangeable and can provide more accurate ratings compared to the CR10® scale. Methods: Two studies were conducted. The validity of the CR100® was determined in 19-elite soccer players (age 28 ± 6 y, height 180 ± 7 cm, body mass 77 ± 6 kg) during training sessions through correlations with Edwards heart rate method (study one). The interchangeability with CR10® was assessed in 78 soccer players (age 19.3 ± 4.1 y, height 178 ± 5.9 cm, body mass 71.4 ± 6.1 kg) through Bland?Altman method and correlations between change scores in different sessions. To examine whether the CR100® is more fine graded than the CR10®, the proportion of responses corresponding to the verbal expressions were calculated (study two). Results: Individual correlations between Edwards' and s-RPE were large to very large (0.52 to 0.85). The mean difference between the two scales was -0.3 ± 0.33 AU (90% CI -0.41 to -0.29 AU) with 95% limits of agreements 0.31 to -0.96 AU. Correlations between scales and between changes scores were nearly perfect (0.95 and 0.91 to 0.98). Ratings corresponding to the verbal anchors were 49% in CR10® and 26% in CR100®. Conclusions: The CR100® is valid for assessing the training load in elite soccer players. It can be used interchangeably with the CR10® and may provide more precise measures of exercise intensity

    Dark Matter searches using gravitational wave bar detectors: quark nuggets and newtorites

    Get PDF
    Many experiments have searched for supersymmetric WIMP dark matter, with null results. This may suggest to look for more exotic possibilities, for example compact ultra-dense quark nuggets, widely discussed in literature with several different names. Nuclearites are an example of candidate compact objects with atomic size cross section. After a short discussion on nuclearites, the result of a nuclearite search with the gravitational wave bar detectors Nautilus and Explorer is reported. The geometrical acceptance of the bar detectors is 19.5 m2\rm m^2 sr, that is smaller than that of other detectors used for similar searches. However, the detection mechanism is completely different and is more straightforward than in other detectors. The experimental limits we obtain are of interest because, for nuclearites of mass less than 10510^{-5} g, we find a flux smaller than that one predicted considering nuclearites as dark matter candidates. Particles with gravitational only interactions (newtorites) are another example. In this case the sensitivity is quite poor and a short discussion is reported on possible improvements.Comment: published on Astroparticle Physics Sept 25th 2016 replaced fig 1
    corecore