Effect of different solutions on color stability of acrylic resin-based dentures

The aim of this study was to evaluate the effect of thermocycling and immersion in mouthwash or beverage solutions on the color stability of four different acrylic resin-based dentures (Onda Cryl, OC; QC20, QC; Classico, CL; and Lucitone, LU). The factors evaluated were type of acrylic resin, immersion time, and solution (mouthwash or beverage). A total of 224 denture samples were fabricated. For each type of resin, eight samples were immersed in mouthwashes (Plax-Colgate, PC; Listerine, LI; and Oral-B, OB), beverages (coffee, CP; cola, C; and wine, W), and artificial saliva (AS; control). The color change (SE) was evaluated before (baseline) and after thermocycling (T,), and after immersion in solution for 1 h (T-2), 3 h (T-3), 24 h (T-4), 48 h (T-5), and 96 h (T-6). The CIE Lab system was used to determine the color changes. The thermocycling test was performed for 5000 cycles. Data were submitted to three-way repeated-measures analysis of variance and Tukey's test (p < 0.05). When the samples were immersed in each mouthwash, all assessed factors, associated or not, significantly influenced the color change values, except there was no association between the mouthwash and acrylic resin. Similarly, when the samples were immersed in each beverage, all studied factors influenced the color change values. In general, regardless of the solution, LU exhibited the greatest SE values in the period from T-1 to T-5; and QC presented the greatest SE values at T-6. Thus, thermocycling and immersion in the various solutions influenced the color stability of acrylic resins and QC showed the greatest color alteration.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Department of Dental Materials and Prosthodontics, Araçatuba Dental School, Univ Estadual Paulista - UNESP, Araçatuba, SP, Brazil.FAPESP: 2010/16962-

Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energy and chemical polymerization

Denture fractures are common in daily practice, causing inconvenience to the patient and to the dentists. Denture repairs should have adequate strength, dimensional stability and color match, and should be easily and quickly performed as well as relatively inexpensive. OBJECTIVE: The aim of this study was to evaluate the flexural strength of acrylic resin repairs processed by different methods: warm water-bath, microwave energy, and chemical polymerization. MATERIAL AND METHODS: Sixty rectangular specimens (31x10x2.5 mm) were made with warm water-bath acrylic resin (Lucitone 550) and grouped (15 specimens per group) according to the resin type used to make repair procedure: 1) specimens of warm water-bath resin (Lucitone 550) without repair (control group); 2) specimens of warm water-bath resin repaired with warm water-bath; 3) specimens of warm water-bath resin repaired with microwave resin (Acron MC); 4) specimens of warm water-bath resin repaired with autopolymerized acrylic resin (Simplex). Flexural strength was measured with the three-point bending in a universal testing machine (MTS 810 Material Test System) with load cell of 100 kgf under constant speed of 5 mm/min. Data were analyzed statistically by Kruskal-Wallis test (p<0.05). RESULTS: The control group showed the best result (156.04±1.82 MPa). Significant differences were found among repaired specimens and the results were decreasing as follows: group 3 (43.02±2.25 MPa), group 2 (36.21±1.20 MPa) and group 4 (6.74±0.85 MPa). CONCLUSION: All repaired specimens demonstrated lower flexural strength than the control group. Repairs with autopolymerized acrylic resin showed the lowest flexural strength

Efficacy Of Mandibular Advancement Devices In Two Patients With Moderate Obstructive Sleep Apnea: Case Reports

Scopu

Change in a maxillo-facial prosthesis material effecting from environmental factors: A clinical report

The purpose of this study was to indicate change in an auricular prosthesis resulting from environmental factors. An auricular prosthesis was made from a commercially maxillo-facial dental materials. The patient used this prosthesis. After one year, the auricular prosthesis was changed, it was nonesthetic. The prosthesis was made over again from the beginning. The prosthesis was changed from environmental factors such as sunlight, wetting and drying, cleaning and secretions. Facial prosthesis was fabricated anew because of color changes and surface changes

Comparison of effects of bleach and cleansing tablet on reflectance and surface changes of a dental alloy used for removable partial dentures

Proper hygienic care of removable partial dentures is important for maintaining a healthy oral mucosa. A daily home care routine is the responsibility of the patient to maintain oral hygiene. A dentist must inform the patient about denture cleansers used for plaque control. Common denture cleansers may negatively affect the surface of alloys used to make partial dentures. The purpose of this study was to evaluate whether bleach and cleansing tablet have deleterious effects on the surface of a dental alloy used to fabricate removable partial dentures. Nineteen test specimens were prepared from CoCr dental alloy. The specimens were cast into 10 mm long x 10 mm wide x 1 mm thick. Fresh solutions made from a commercial bleach and a commercial cleansing tablet were used for each treating. Three groups (commercial denture cleansing tablet, bleach and tap water) were tested. Six specimens were immersed in 200 mL of tap water containing a single denture cleansing tablet. Two spoons of the commercial bleach was added to 200 mL of tap water. Seven specimens were treated. The control specimens were immersed in 200 mL of tap water. Six specimens were the control group. Each specimen was immersed for 30 min per day in the solution for a period of 30 days. The specimens were analyzed for reflectance with a spectrophotometer, for surface changes with a light microscope and weight which was measured with sensitive balance before and after treatment. The SPSS program was used for the statistical analysis. The Kruskal-Wallis Test and Wilcoxon Signed Ranks Test was used. No significant changes of reflectance was shown in the Kruskal-Wallis Test (P > 0.05). The Wilcoxon Signed Ranks Test was performed for comparison into groups. The difference between before and after treatment was statistically significant for the commercial denture cleansing tablet and the commercial bleach (P = 0.028) (P < 0.05). Reflectance was decreased after treatment. Within the limitations of this study, the commercial cleaning solutions had influenced the decrease of reflectance on the surface of the dental alloy. This solutions should not be limitlessly used on dentures with metal components, because they caused clinically significant reflectance changes on the surface of the alloy after 30 days

Evaluation of gloss changes of two denture acrylic resin materials in four different beverages

Objectives. The primary disadvantages of the materials which are used in construction of complete and removable partial dentures is that their esthetic, physical and mechanical properties change rapidly with time in the oral environment. For esthetics, color stability is one of the criteria that needs careful attention. Color may provide important information on the serviceability of these materials. Color change affects the gloss of these materials. The objective of the present study was to determine the gloss changes resulting from the testing process in four different beverages in one heat-polymerized denture base resin and one cold-polymerized denture base repair resin

Full-crown castings made with water-saturated and dry casting ring liners

The carcinogenic potential of asbestos has led to the development of non-asbestos materials for use as casting ring liners. Cellulose paper are replacing asbestos paper