952 research outputs found
Saliva from obese individuals suppresses the release of aroma compounds from wine.
BackgroundRecent evidence suggests that a lower extent of the retronasal aroma release correspond to a higher amount of ad libitum food intake. This has been regarded as one of the bases of behavioral choices towards food consumption in obese people. In this pilot study we investigated the hypothesis that saliva from obese individuals could be responsible for an alteration of the retro-nasal aroma release. We tested this hypothesis in vitro, by comparing the release of volatiles from a liquid food matrix (wine) after its interaction with saliva from 28 obese (O) and 28 normal-weight (N) individuals.Methods and findingsAmplicon sequencing of the 16S rRNA V4 region indicated that Firmicutes and Actinobacteria were more abundant in O, while Proteobacteria and Fusobacteria dominated in N. Streptococcaceae were significantly more abundant in the O subjects and constituted 34% and 19% on average of the saliva microbiota of O and N subjects, respectively. The Total Antioxidant Capacity was higher in O vs N saliva samples. A model mouth system was used to test whether the in-mouth wine aroma release differs after the interaction with O or N saliva. In O samples, a 18% to 60% significant decrease in the mean concentration of wine volatiles was detected as a result of interaction with saliva, compared with N. This suppression was linked to biochemical differences in O and N saliva composition, which include protein content.ConclusionMicrobiological and biochemical differences were found in O vs N saliva samples. An impaired retronasal aroma release from white wine was detected in vitro and linked to compositional differences between saliva from obese and normal-weight subjects. Additional in vivo investigations on diverse food matrices could contribute to understanding whether a lower olfactory stimulation due to saliva composition can be a co-factor in the development/maintenance of obesity
LAPS Lidar Measurements at the ARM Alaska Northslope Site (Support to FIRE Project)
This report consists of data summaries of the results obtained during the May 1998 measurement period at Barrow Alaska. This report does not contain any data interpretation or analysis of the results which will follow this activity. This report is forwarded with a data set on magnetic media which contains the reduced data from the LAPS lidar in 15 minute intervals. The data was obtained during the period 15-30 May 1998. The measurement period overlapped with several aircraft flights conducted by NASA as part of the FIRE project. The report contains a summary list of the data obtained plus figures that have been prepared to help visualize the measurement periods. The order of the presentation is as follows: Section 1. A copy of the Statement of Work for the planned activity of the second measurement period at the ARM Northslope site is provided. Section 2. A list of the data collection periods shows the number of one minute data records stored during each hour of operation and the corresponding size (Mbytes) of the one hour data folders. The folder and file names are composed from the year, month, day, hour and minute. The date/time information is given in UTC for easier comparison with other data sets. Section 3. A set of 4 comparisons between the LAPS lidar results and the sondes released by the ARM scientists from a location nearby the lidar. The lidar results show the +/- 1 sigma statistical error on each of the independent 75 m altitude bins of the data. This set of 4 comparisons was used to set and validate the calibration value which was then used for the complete data set. Section 4. A set of false color figures with up to 10 hours of specific humidity measurements are shown in each graph. Two days of measurements are shown on each page. These plots are crude representations of the data and permit a survey which indicates when the clouds were very low or where interesting events may occur in the results. These plots are prepared using the real time sequence plot program which has no smoothing in either the altitude or time (except that you are allowed to pick the integration time and time step. All of these plots were prepared with 15 minute integration and 5 minute time step. Section 5. A set of time sequence data for all of the extended observation periods are shown with a smoothing algorithm from the Matlab plotting library. Most of these data are integrated for 5 minutes and stepped at I minute intervals but several plots are shown with both 15 minute integration and 5 minute steps. The upper level on these data was selected and converted to the white background where the error in the specific humidity reached 25%. Section 6. The set of one hour integrated plots shown with up to 4 hours per page are provided- from the real time analysis snapshot program. The only difference in these plots and the real time display is that the plots are stopped at an altitude where the error appears to be too large for the data to contain any meaningful information
Wireless ad hoc networks on underserved communities: an efficient solution for interactive digital TV
The Brazilian government intends to use the Digital TV technology as a vehicle of digital inclusion on underserved communities.
The wireless ad hoc network is a low-cost, scalable and easy solution to implement the return channel. This work analyzes the performance of an ad hoc return channel using the wireless IEEE 802.11 technology in different Brazilian geographical scenarios. The results show that a high connectivity is achieved when more than 20% of the nodes are turned on, regardless of the position of the gateway. The influence of the number of hops and the number of transmitting nodes is also analyzed. A minimum throughput of 2 Mbps can be reached for increasing number of hops in the forwarding chain for a one-node transmission. Besides, when the number of transmitting nodes increases, the aggregated throughput can achieve 3.5 Mbps. The results show that the ad hoc network is a promising solution for the return channel of the interactive Digital TV.8th IFIP/IEEE International conference on Mobile and Wireless CommunicationRed de Universidades con Carreras en Informática (RedUNCI
Drifter observations reveal intense vertical velocity in a surface ocean front
© The Author(s), 2022. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Tarry, D., Ruiz, S., Johnston, T., Poulain, P., Özgökmen, T., Centurioni, L., Berta, M., Esposito, G., Farrar, J., Mahadevan, A., & Pascual, A. Drifter observations reveal intense vertical velocity in a surface ocean front. Geophysical Research Letters, 49(18), (2022): e2022GL098969, https://doi.org/10.1029/2022gl098969.Measuring vertical motions represent a challenge as they are typically 3–4 orders of magnitude smaller than the horizontal velocities. Here, we show that surface vertical velocities are intensified at submesoscales and are dominated by high frequency variability. We use drifter observations to calculate divergence and vertical velocities in the upper 15 m of the water column at two different horizontal scales. The drifters, deployed at the edge of a mesoscale eddy in the Alboran Sea, show an area of strong convergence (urn:x-wiley:00948276:media:grl64766:grl64766-math-0001(f)) associated with vertical velocities of −100 m day−1. This study shows that a multilayered-drifter array can be an effective tool for estimating vertical velocity near the ocean surface.This research was supported by the Office of Naval Research (ONR) Departmental Research Initiative CALYPSO under program officers Terri Paluszkiewicz and Scott Harper. The authors' ONR Grant No. are as follows: DT, SR, AM, and AP N000141613130, TMSJ N000146101612470, PP N000141812418, TO N000141812138, LRC N000141712517, and N00014191269, MB and GE N000141812782 and N000141812039, and JTF N000141812431
Gribov Problem for Gauge Theories: a Pedagogical Introduction
The functional-integral quantization of non-Abelian gauge theories is
affected by the Gribov problem at non-perturbative level: the requirement of
preserving the supplementary conditions under gauge transformations leads to a
non-linear differential equation, and the various solutions of such a
non-linear equation represent different gauge configurations known as Gribov
copies. Their occurrence (lack of global cross-sections from the point of view
of differential geometry) is called Gribov ambiguity, and is here presented
within the framework of a global approach to quantum field theory. We first
give a simple (standard) example for the SU(2) group and spherically symmetric
potentials, then we discuss this phenomenon in general relativity, and recent
developments, including lattice calculations.Comment: 24 pages, Revtex 4. In the revised version, a statement has been
amended on page 11, and References 14, 16 and 27 have been improve
A scanning probe investigation of the role of surface motifs in the behavior of p-WSe_2 photocathodes
The spatial variation in the photoelectrochemical performance for the reduction of an aqueous one-electron redox couple, Ru(NH_3)_6^(3+/2+), and for the evolution of H_2(g) from 0.5 M H_2SO_4(aq) at the surface of bare or Pt-decorated p-type WSe_2 photocathodes has been investigated in situ using scanning photocurrent microscopy (SPCM). The measurements revealed significant differences in the charge-collection performance (quantified by the values of external quantum yields, Φ_(ext)) on various macroscopic terraces. Local spectral response measurements indicated a variation in the local electronic structure among the terraces, which was consistent with a non-uniform spatial distribution of sub-band-gap states within the crystals. The photoconversion efficiencies of Pt-decorated p-WSe_2 photocathodes were greater for the evolution of H_2(g) from 0.5 M H_2SO_4 than for the reduction of Ru(NH_3)_6^(3+/2+), and terraces that exhibited relatively low values of Φ_(ext) for the reduction of Ru(NH_3)_6^(3+/2+) could in some cases yield values of Φ_(ext) for the evolution of H_2(g) comparable to the values of Φ_(ext) yielded by the highest-performing terraces. Although the spatial resolution of the techniques used in this work frequently did not result in observation of the effect of edge sites on photocurrent efficiency, some edge effects were observed in the measurements; however the observed edge effects differed among edges, and did not appear to determine the performance of the electrodes
The Democratic Biopolitics of PrEP
PrEP (Pre-Exposure Prophylaxis) is a relatively new drug-based HIV prevention technique and an important means to lower the HIV risk of gay men who are especially vulnerable to HIV. From the perspective of biopolitics, PrEP inscribes itself in a larger trend of medicalization and the rise of pharmapower. This article reconstructs and evaluates contemporary literature on biopolitical theory as it applies to PrEP, by bringing it in a dialogue with a mapping of the political debate on PrEP. As PrEP changes sexual norms and subjectification, for example condom use and its meaning for gay subjectivity, it is highly contested. The article shows that the debate on PrEP can be best described with the concepts ‘sexual-somatic ethics’ and ‘democratic biopolitics’, which I develop based on the biopolitical approach of Nikolas Rose and Paul Rabinow. In contrast, interpretations of PrEP which are following governmentality studies or Italian Theory amount to either farfetched or trivial positions on PrEP, when seen in light of the political debate. Furthermore, the article is a contribution to the scholarship on gay subjectivity, highlighting how homophobia and homonormativity haunts gay sex even in liberal environments, and how PrEP can serve as an entry point for the destigmatization of gay sexuality and transformation of gay subjectivity. ‘Biopolitical democratization’ entails making explicit how medical technology and health care relates to sexual subjectification and ethics, to strengthen the voice of (potential) PrEP users in health politics, and to renegotiate the profit and power of Big Pharma
Methods of photoelectrode characterization with high spatial and temporal resolution
Materials and photoelectrode architectures that are highly efficient, extremely stable, and made from low cost materials are required for commercially viable photoelectrochemical (PEC) water-splitting technology. A key challenge is the heterogeneous nature of real-world materials, which often possess spatial variation in their crystal structure, morphology, and/or composition at the nano-, micro-, or macro-scale. Different structures and compositions can have vastly different properties and can therefore strongly influence the overall performance of the photoelectrode through complex structure–property relationships. A complete understanding of photoelectrode materials would also involve elucidation of processes such as carrier collection and electrochemical charge transfer that occur at very fast time scales. We present herein an overview of a broad suite of experimental and computational tools that can be used to define the structure–property relationships of photoelectrode materials at small dimensions and on fast time scales. A major focus is on in situ scanning-probe measurement (SPM) techniques that possess the ability to measure differences in optical, electronic, catalytic, and physical properties with nano- or micro-scale spatial resolution. In situ ultrafast spectroscopic techniques, used to probe carrier dynamics involved with processes such as carrier generation, recombination, and interfacial charge transport, are also discussed. Complementing all of these experimental techniques are computational atomistic modeling tools, which can be invaluable for interpreting experimental results, aiding in materials discovery, and interrogating PEC processes at length and time scales not currently accessible by experiment. In addition to reviewing the basic capabilities of these experimental and computational techniques, we highlight key opportunities and limitations of applying these tools for the development of PEC materials
A pattern of care analysis: Prosthetic rehabilitation of head and neck cancer patients after radiotherapy
Background
While some medical associations provide guidelines for the implant‐prosthetic rehabilitation of head and neck cancer patients, the circulation and implementation in the everyday routine of practicing dentists remain unknown.
Purpose
To analyze patterns of care for the prosthetic rehabilitation of head and neck cancer patients after radiotherapy in German speaking countries.
Materials and methods
An online survey consisting of 34 questions separated into three sections, (a) general inquiries, (b) treatment concepts, and (c) patient cases, was forwarded to university hospital departments for Prosthetic Dentistry and Oral and Maxillofacial Surgery, and members of different medical associations. Statistical differences between groups were analyzed using chi‐squared test (P < .05).
Results
From May to October 2019, 118 participants completed the survey. The majority practiced in university hospitals, had more than 5 years of work experience, and reported to be involved in <10 post radiation prosthetic rehabilitation cases per year. Rehabilitation protocols involving dental implants were implemented by oral/oral‐ and maxillofacial surgeons and prosthetic dentists, while general dentists favored implant‐free solutions. Xerostomia was recognized as a common problem for a successful prosthetic rehabilitation. The subsequent treatment choice with either fixed dental prostheses or removable dentures was divided among participants.
Conclusions
As treatment planning differed with regard to the participants' field of expertise and work environment, and most practitioners only handle a low number of cases, patients might benefit from centralization in larger institutes with a multidisciplinary structure. A high agreement between the practitioners' treatment concepts and the current state of research was observed. While the choice between a mucosa‐ or tooth‐supported, and an implant‐supported restoration depends on numerous individual factors, guidelines derived from longitudinal studies would enhance evidence‐based treatment in this field
- …