314 research outputs found
Finite volume simulation of 2-D steady square lid driven cavity flow at high reynolds numbers
In this work, computer simulation results of steady incompressible flow in a 2-D square lid-driven cavity up to Reynolds number (Re) 65000 are presented and compared with those of earlier studies. The governing flow equations are solved by using the finite volume approach. Quadratic upstream interpolation for convective kinematics (QUICK) is used for the approximation of the convective terms in the flow equations. In the implementation of QUICK, the deferred correction technique is adopted. A non-uniform staggered grid arrangement of 768x768 is employed to discretize the flow geometry. Algebraic forms of the coupled flow equations are then solved through the iterative SIMPLE (Semi-Implicit Method for Pressure-Linked Equation) algorithm. The outlined computational methodology allows one to meet the main objective of this work, which is to address the computational convergence and wiggled flow problems encountered at high Reynolds and Peclet (Pe) numbers. Furthermore, after Re > 25000 additional vortexes appear at the bottom left and right corners that have not been observed in earlier studies
Structuring research on conformal antennas a European collaboration
The topic of this paper is the work carried out within work package 2.4-3 of the EU network "antenna centre of excellence" (ACE). This work package is concerned with structuring research on conformal antennas. In particular, the work is focused on the problems associated with full benchmarking of conformal antennas, on development of hybrid programs for analyzing different classes of conformal antennas, and on investigation of properties of algorithms for optimizing beam synthesis and beam-steering for conformal arrays
Nonlinear characterization of a bistable energy harvester dynamical system
International audienceThis chapter explores the nonlinear dynamics of a piezo-magneto-elastic bistable energy device system regards the influence of external forcing parameters influence on system response. Time series, Poincaré maps, phase space trajectories, and bifurcation diagrams are employed in order to reveals system dynamics complexity and nonlinear effects, such as chaos incidence and hysteresis
On the dynamics of a nonlinear energy harvester with multiple resonant zones
The dynamics of a nonlinear vibration energy harvester for rotating systems is investigated analytically through harmonic balance, as well as by numerical analysis. The electromagnetic harvester is attached to a spinning shaft at constant speed. Magnetic levitation is used as the system nonlinear restoring force for broadening the resonant range of the oscillator. The system is modelled as a Duffing oscillator with linear frequency variation under static, as well as harmonic excitation. Behaviour charts and backbone curves are extracted for the fundamental harmonic response and validated against frequency response curves for selected cases, using direct numerical integration. It is found that variation in stiffness, together with asymmetric forcing, gives rise to a novel structure of multiple resonant zones, incorporating mono-stable and bi-stable dynamics. Contrary to previously considered bi-stable energy harvesters, cross-well oscillations are realized through a transition from single-well potential energy to double-well with forward frequency sweep. Furthermore, in-well_oscillations present a hardening behaviour, unlike the well-known softening in-well response of bi-stable Duffing oscillators. The analysis shows that the proposed system has multiple resonant responses to a frequency sweep, influenced by consecutive interacting backbone curves similar to a multi-modal system. This combined effect of the transition to bi-stable dynamics and the hardening in-well oscillations induces resonant response of the harvester over multiple distinct frequency ranges. Thus, the system exhibits a broadened frequency response, enhancing its energy harvesting potential
Rectifying the output of vibrational piezoelectric energy harvester using quantum dots
Piezoelectric energy harvester scavenges mechanical vibrations and generates electricity. Researchers have strived to optimize the electromechanical structures and to design necessary external power management circuits, aiming to deliver high power and rectified outputs ready for serving as batteries. Complex deformation of the mechanical structure results in charges with opposite polarities appearing on same surface, leading to current loss in the attached metal electrode. External power management circuits such as rectifiers comprise diodes that consume power and have undesirable forward bias. To address the above issues, we devise a novel integrated piezoelectric energy harvesting device that is structured by stacking a layer of quantum dots (QDs) and a layer of piezoelectric material. We find that the QD can rectify electrical charges generated from the piezoelectric material because of its adaptable conductance to the electrochemical potentials of both sides of the QDs layer, so that electrical current causing energy loss on the same surface of the piezoelectric material can be minimized. The QDs layer has the potential to replace external rectification circuits providing a much more compact and less power-consumption solution
An experimental investigation into resonance dry grinding of hardened steel and nickel alloys with element of MQL
Current policies on environmental issues put extra pressures on manufacturing processes to be resource efficient and eco-friendly. However, in grinding processes, large amounts of cutting fluids are used. These fluids are not environmental friendly thus require proper management before disposal with associated cost. Hence, this work sets to explore low-frequency vibration in grinding in order to improve coolant application in conventional grinding at the first stage with the aim to introduce this into high efficiency deep grinding (HEDG) at latter stage. An attempt is made to grind nickel alloys with minimum quantity lubricant (MQL) as oppose to flood cooling. To achieve this with minimum alterations to the machine tool, a piezo-driven workpiece holder was developed for surface grinding. This simple innovative workpiece holder allowed oscillating during actual grinding process. However, this paper presents the results of low-frequency oscillatory grinding in dry and near-dry conditions. The response of the machine tool spindle unit is presented alongside with the workpiece holder response. In this investigation, hardened steels and nickel alloys were ground with vibration assistance. The grinding forces are illustrated together with the surface finish. The wheel performance is given in terms of grinding ratio
Novel VLDLR microdeletion identified in two Turkish siblings with pachygyria and pontocerebellar atrophy
Congenital ataxia with cerebellar hypoplasia is a heterogeneous group of disorders that presents with motor disability, hypotonia, incoordination, and impaired motor development. Among these, disequilibrium syndrome describes a constellation of findings including nonprogressive cerebellar ataxia, mental retardation, and cerebellar hypoplasia following an autosomal recessive pattern of inheritance and can be caused by mutations in the Very Low Density Lipoprotein Receptor (VLDLR). Interestingly, while the majority of patients with VLDLassociated cerebellar hypoplasia in the literature use bipedal gait, the previously reported patients of Turkish decent have demonstrated similar neurological sequelae, but rely on quadrupedal gait. We present a consanguinous Turkish family with two siblings with cerebellar atrophy, predominantly frontal pachygyria and ataxic bipedal gait, who were found to have a novel homozygous deletion in the VLDLR gene identified by using high-density single nucleotide polymorphism microarrays for homozygosity mapping and identification of CNVs within these regions. Discovery of disease causing homozygous deletions in the present Turkish family capable of maintaining bipedal movement exemplifies the phenotypic heterogeneity of VLDLRassociated cerebellar hypoplasia and ataxia. © Springer-Verlag 2010
Results of endoscopic transsphenoidal pituitary surgery in 40 patients with a growth hormone-secreting macroadenoma
Contains fulltext :
96290.pdf (Publisher’s version ) (Open Access)OBJECTIVE: Transsphenoidal pituitary surgery (TS) is the primary treatment of choice for patients with acromegaly. Macroadenomas (>1 cm) are more difficult to resect than microadenomas (remission rate +/- 50% compared to +/- 90%). Besides the conventional microscopic TS, the more recently introduced endoscopic technique is nowadays frequently used. However, no large series reporting on its results have yet been published. We evaluated the outcome of endoscopic TS in 40 patients with a growth hormone (GH)-secreting macroadenoma treated in our hospital between 1998 and 2007. METHODS: Medical records were retrospectively reviewed. Remission was defined as disappearance of clinical symptoms of acromegaly, normal serum insulin-like growth factor-1 levels (</=2 SD) and serum GH levels suppressed to <2 mU/l after an oral glucose tolerance test within the first 4 months after TS. RESULTS: In four patients TS aimed at debulking of the tumour. In the remaining 36 patients, remission was achieved in 20 patients. In the first 5 years remission was achieved in 6 out of 18 patients (33%) compared to 14 out of 22 patients (63%) in the following 5 years (p = 0.06). Thirteen patients had a mild perioperative complication. Before TS 15 patients received hormonal substitution therapy compared to 12 patients (33%) after TS. CONCLUSION: Endoscopic TS is a good primary therapeutic option for patients with a GH-secreting macroadenoma, resulting in a remission rate of up to 63% in experienced hands. This technique can potentially improve the outcome of TS in these patients
Toll-8/Tollo Negatively Regulates Antimicrobial Response in the Drosophila Respiratory Epithelium
Barrier epithelia that are persistently exposed to microbes have evolved potent immune tools to eliminate such pathogens. If mechanisms that control Drosophila systemic responses are well-characterized, the epithelial immune responses remain poorly understood. Here, we performed a genetic dissection of the cascades activated during the immune response of the Drosophila airway epithelium i.e. trachea. We present evidence that bacteria induced-antimicrobial peptide (AMP) production in the trachea is controlled by two signalling cascades. AMP gene transcription is activated by the inducible IMD pathway that acts non-cell autonomously in trachea. This IMD-dependent AMP activation is antagonized by a constitutively active signalling module involving the receptor Toll-8/Tollo, the ligand Spätzle2/DNT1 and Ect-4, the Drosophila ortholog of the human Sterile alpha and HEAT/ARMadillo motif (SARM). Our data show that, in addition to Toll-1 whose function is essential during the systemic immune response, Drosophila relies on another Toll family member to control the immune response in the respiratory epithelium
- …