42 research outputs found
Energy harvesting of low-grade waste heat with colloid based technology
L'abstract è presente nell'allegato / the abstract is in the attachmen
Wearable Intrinsically Soft, Stretchable, Flexible Devices for Memories and Computing
A recent trend in the development of high mass consumption electron devices is towards electronic textiles (e-textiles), smart wearable devices, smart clothes, and flexible or printable electronics. Intrinsically soft, stretchable, flexible, Wearable Memories and Computing devices (WMCs) bring us closer to sci-fi scenarios, where future electronic systems are totally integrated in our everyday outfits and help us in achieving a higher comfort level, interacting for us with other digital devices such as smartphones and domotics, or with analog devices, such as our brain/peripheral nervous system. WMC will enable each of us to contribute to open and big data systems as individual nodes, providing real-time information about physical and environmental parameters (including air pollution monitoring, sound and light pollution, chemical or radioactive fallout alert, network availability, and so on). Furthermore, WMC could be directly connected to human brain and enable extremely fast operation and unprecedented interface complexity, directly mapping the continuous states available to biological systems. This review focuses on recent advances in nanotechnology and materials science and pays particular attention to any result and promising technology to enable intrinsically soft, stretchable, flexible WMC
Multiphysics‐Enabled Liquid State Thermal Harvesting: Synergistic Effects between Pyroelectricity and Triboelectrification
Energy consumption levels show a never-ending increase since the industrial era. Toward sustainability objectives, it is of outstanding importance to reduce the amount of wasted energy, that typically comes as waste heat, as a consequence of nonunitary efficiency of any thermodynamic process. Herein, a breakthrough in conversion of low enthalpy heat into electricity is presented, based on a liquid state device that operates through multiphysics effects: thermomagnetic advection, triboelectricity, pyroelectricity, and Ludwig–Sorét effect. A synergistic interaction between ferroelectric surfaces and a complex composition colloidal suspension is evidenced, owing to an enhancement of the generated potential of 365% in comparison with pyroelectric effect and 267% in comparison with triboelectric effect, while the current extracted is 54% higher than the pyroelectric effect only and the power extracted by induction remains substantially unperturbed. The impact of this technology on society is also analyzed, on the basis of a set of practical applications, by means of a computational analysis
Experimental demonstration of in-memory computing in a ferrofluid system
Magnetic fluids are excellent candidates for several important research fields including energy harvesting, biomedical applications, soft robotics, and exploration. However, notwithstanding relevant advancements such as shape reconfigurability, that have been demonstrated, there is no evidence for their computing capability, including the emulation of synaptic functions, which requires complex non-linear dynamics. Here, it is experimentally demonstrated that a Fe3O4 water-based ferrofluid (FF) can perform electrical analogue computing and be programmed using quasi direct current (DC) signals and read at radio frequency (RF) mode. Features have been observed in all respects attributable to a memristive behavior, featuring both short and long-term information storage capacity and plasticity. The colloid is capable of classifying digits of a 8×8 pixel dataset using a custom in-memory signal processing scheme, and through physical reservoir computing by training a readout layer. These findings demonstrate the feasibility of in-memory computing using an amorphous FF system in a liquid aggregation state. This work poses the basis for the exploitation of a FF colloid as both an in-memory computing device and as a full-electric liquid computer thanks to its fluidity and the reported complex dynamics, via probing read-out and programmingports
SCARLET – A European Effort to Develop HTS and MgB2 Based MVDC Cables
Superconducting cables have been proven in a variety of pilot projects and utility installations, demonstrating several of their advantages, including compact size and low energy losses, which can make the technology economically attractive for certain applications. It is clear though that different applications impose different requirements and challenges, but also opportunities for the cables. An interesting application is high-power DC transfer at medium voltage (MVDC). The high-current capability of the superconductor allows for a reduction in voltage while maintaining or increasing the power transfer level. In this way, one MVDC superconducting cable can replace one or more conventional high-voltage DC cables. In the European project SCARLET (Superconducting cables for sustainable energy transition), two types of MVDC cables will be developed, one based on HTS and one on MgB2 materials. Additionally, protection requirements will be considered, including the development of a modular DC fault current limiter for 10 kA. A main motivation for the development is the elimination of costly high-voltage converter stations when going from high to medium voltage, e.g., for offshore wind power plants. Another feature is the combined hydrogen and electricity transmission from generation sites to industry or mobility end users. This paper describes the superconducting MVDC cable concept as well as the main challenges and research needed to develop and type test the cables.SCARLET – A European Effort to Develop HTS and MgB2 Based MVDC CablesacceptedVersio
Deliverable 3.6 zoning plan of case studies : evaluation of spatial management options for the case studies
Within MESMA, nine case studies (CS) represent discrete marine European spatial entities, at different spatial scales, where a spatial marine management framework is in place, under development or considered. These CS (described in more details below) are chosen in such a way (MESMA D. 3.1 ) that they encompass the complexity of accommodating the various user functions of the marine landscape in various regions of the European marine waters. While human activities at sea are competing for space, there is also growing awareness of the possible negative effects of these human activities on the marine ecosystem. As such, system specific management options are required, satisfying current and future sectoral needs, while safeguarding the marine ecosystem from further detoriation. This integrated management approach is embedded in the concept of ecosystem based management (EBM). The goal of marine EBM is to maintain marine ecosystems in a healthy, productive and resilient condition, making it possible that they sustain human use and provide the goods and services required by society (McLeod et al. 2005). Therefore EBM is an environmental mangagement approach that recognises the interactions within a marine ecosystem, including humans. Hence, EBM does not consider single issues, species or ecosystems good and services in isolation. Operationalisation of EBM can be done through place-based or spatial management approaches (Lackey 1998), such as marine spatial planning (MSP). MSP is a public process of analysing and allocating the spatial and temporal distribution of human activities aiming at achieving ecological, economic and social objectives. These objectives are usually formulated through political processes (Douvere et al. 2007, Douvere 2008). Within MESMA, a spatially managed area (SMA) is then defined as “a geographical area within which marine spatial planning initiatives exist in the real world”. Marine spatial planning initiatives refer to existing management measures actually in place within a defined area, or in any stage of a process of putting management in place, e.g. plans or recommendations for a particular area. Management can include management for marine protection (e.g. in MPAs), or management for sectoral objectives (e.g. building a wind farm to meet renewable energy objectives). Within MESMA, SMAs can have different spatial scales. A SMA can be a small, specific area that is managed/planned to be managed for one specific purpose, but it can also be a larger area within which lots of plans or ‘usage zones’ exist. This definition is different from the definition mentioned in the DoW (page 60). The original definition was adapted during a CS leader workshop (2-4 May 2012 in Gent, Belgium) and formally accepted by the MESMA ExB during the ExB meeting in Cork (29-30 May 2012).
MSP should result in a marine spatial management plan that will produce the desired future trough explicit decisions about the location and timing of human activities. Ehler & Douvere (2009) consider this spatial management as a beginning toward the the implementation of desired goals and objectives. They describe the spatial management plan as a comprehensive, strategic document that provides the framework and direction for marine spatial management decisions. The plan should identify when, where and how goals and objectives will be met.
Zoning (the development of zoning plans) is often an important management measure to implement spatial management plans. The purpose of a zoning plan (Ehler & Douvere 2009) is: To provide protection for biologically and ecologically important habitats, ecosystems, and ecological processes. To seperate conflicting human activities, or to combine compatible activities. To protect the natural values of the marine management area (in MESMA terminology: the SMA) while allowing reasonable human uses of the area. To allocate areas for reasonable human uses while minimising the effects of these human uses on each other, and nature. To preserve some areas of the SMA in their natural state undisturbed by humans except for scientific and educational purposes.peer-reviewe
Impact of COVID-19 on cardiovascular testing in the United States versus the rest of the world
Objectives: This study sought to quantify and compare the decline in volumes of cardiovascular procedures between the United States and non-US institutions during the early phase of the coronavirus disease-2019 (COVID-19) pandemic.
Background: The COVID-19 pandemic has disrupted the care of many non-COVID-19 illnesses. Reductions in diagnostic cardiovascular testing around the world have led to concerns over the implications of reduced testing for cardiovascular disease (CVD) morbidity and mortality.
Methods: Data were submitted to the INCAPS-COVID (International Atomic Energy Agency Non-Invasive Cardiology Protocols Study of COVID-19), a multinational registry comprising 909 institutions in 108 countries (including 155 facilities in 40 U.S. states), assessing the impact of the COVID-19 pandemic on volumes of diagnostic cardiovascular procedures. Data were obtained for April 2020 and compared with volumes of baseline procedures from March 2019. We compared laboratory characteristics, practices, and procedure volumes between U.S. and non-U.S. facilities and between U.S. geographic regions and identified factors associated with volume reduction in the United States.
Results: Reductions in the volumes of procedures in the United States were similar to those in non-U.S. facilities (68% vs. 63%, respectively; p = 0.237), although U.S. facilities reported greater reductions in invasive coronary angiography (69% vs. 53%, respectively; p < 0.001). Significantly more U.S. facilities reported increased use of telehealth and patient screening measures than non-U.S. facilities, such as temperature checks, symptom screenings, and COVID-19 testing. Reductions in volumes of procedures differed between U.S. regions, with larger declines observed in the Northeast (76%) and Midwest (74%) than in the South (62%) and West (44%). Prevalence of COVID-19, staff redeployments, outpatient centers, and urban centers were associated with greater reductions in volume in U.S. facilities in a multivariable analysis.
Conclusions: We observed marked reductions in U.S. cardiovascular testing in the early phase of the pandemic and significant variability between U.S. regions. The association between reductions of volumes and COVID-19 prevalence in the United States highlighted the need for proactive efforts to maintain access to cardiovascular testing in areas most affected by outbreaks of COVID-19 infection
Recommended from our members
Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study
Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat
Recommended from our members
Correction to: Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study
The original version of this article unfortunately contained a mistake
Prevalence, associated factors and outcomes of pressure injuries in adult intensive care unit patients: the DecubICUs study
Funder: European Society of Intensive Care Medicine; doi: http://dx.doi.org/10.13039/501100013347Funder: Flemish Society for Critical Care NursesAbstract: Purpose: Intensive care unit (ICU) patients are particularly susceptible to developing pressure injuries. Epidemiologic data is however unavailable. We aimed to provide an international picture of the extent of pressure injuries and factors associated with ICU-acquired pressure injuries in adult ICU patients. Methods: International 1-day point-prevalence study; follow-up for outcome assessment until hospital discharge (maximum 12 weeks). Factors associated with ICU-acquired pressure injury and hospital mortality were assessed by generalised linear mixed-effects regression analysis. Results: Data from 13,254 patients in 1117 ICUs (90 countries) revealed 6747 pressure injuries; 3997 (59.2%) were ICU-acquired. Overall prevalence was 26.6% (95% confidence interval [CI] 25.9–27.3). ICU-acquired prevalence was 16.2% (95% CI 15.6–16.8). Sacrum (37%) and heels (19.5%) were most affected. Factors independently associated with ICU-acquired pressure injuries were older age, male sex, being underweight, emergency surgery, higher Simplified Acute Physiology Score II, Braden score 3 days, comorbidities (chronic obstructive pulmonary disease, immunodeficiency), organ support (renal replacement, mechanical ventilation on ICU admission), and being in a low or lower-middle income-economy. Gradually increasing associations with mortality were identified for increasing severity of pressure injury: stage I (odds ratio [OR] 1.5; 95% CI 1.2–1.8), stage II (OR 1.6; 95% CI 1.4–1.9), and stage III or worse (OR 2.8; 95% CI 2.3–3.3). Conclusion: Pressure injuries are common in adult ICU patients. ICU-acquired pressure injuries are associated with mainly intrinsic factors and mortality. Optimal care standards, increased awareness, appropriate resource allocation, and further research into optimal prevention are pivotal to tackle this important patient safety threat