Test beam performance measurements for the Phase I upgrade of the CMS pixel detector

A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is (99.95 ± 0.05) %, while the intrinsic spatial resolutions are (4.80 ± 0.25) μm and (7.99 ± 0.21) μm along the 100 μm and 150 μm pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.Peer reviewe

The CMS Phase-1 pixel detector upgrade

The CMS detector at the CERN LHC features a silicon pixel detector as its innermost subdetector. The original CMS pixel detector has been replaced with an upgraded pixel system (CMS Phase-1 pixel detector) in the extended year-end technical stop of the LHC in 2016/2017. The upgraded CMS pixel detector is designed to cope with the higher instantaneous luminosities that have been achieved by the LHC after the upgrades to the accelerator during the first long shutdown in 2013–2014. Compared to the original pixel detector, the upgraded detector has a better tracking performance and lower mass with four barrel layers and three endcap disks on each side to provide hit coverage up to an absolute value of pseudorapidity of 2.5. This paper describes the design and construction of the CMS Phase-1 pixel detector as well as its performance from commissioning to early operation in collision data-taking.Peer reviewe

EREBUS: the EuRopean Extinction BUmp Survey

Dust in the Interstellar Medium (ISM) is intimately linked to the life cycle of stars. Despite being of such fundamental importance to galaxy evolution, the dynamic behaviour and composition of the ISM are not yet fully understood. Observations of reddened Milky Way OB stars have revealed a strong UV extinction feature around 2175 Å and a precipitous extinction rise to the far UV along the lines of sight. Whilst the carrier(s) for this are at present still being debated, multiple laboratory studies suggest carbonate grains to be the key constituent. EREBUS is a mission concept being developed to study the composition of the ISM in both the Milky Way and Local Group Galaxies, primarily by mapping the spatial distribution of the UV extinction features. As these features are sensitive to the dust composition along the line of sight, EREBUS will provide a wealth of information about the spatial distribution and dynamic behaviour of the carrier(s). The mission proposes to deploy a satellite observatory equipped with a coarse UV spectrograph to map the extinction curve variability in the Milky Way in 3 dimensions and in the Local Group in 2 dimensions. In this paper, we discuss the scientific goals for the project, discuss a proposed observation strategy using an iterative process to develop a hierarchical map, and finally outline the instrument requirements and preliminary spacecraft architecture

EREBUS: the EuRopean Extinction BUmp Survey

Dust in the Interstellar Medium (ISM) is intimately linked to the life cycle of stars. Despite being of such fundamental importance to galaxy evolution, the dynamic behaviour and composition of the ISM are not yet fully understood. Observations of reddened Milky Way OB stars have revealed a strong UV extinction feature around 2175 Å and a precipitous extinction rise to the far UV along the lines of sight. Whilst the carrier(s) for this are at present still being debated, multiple laboratory studies suggest carbonate grains to be the key constituent. EREBUS is a mission concept being developed to study the composition of the ISM in both the Milky Way and Local Group Galaxies, primarily by mapping the spatial distribution of the UV extinction features. As these features are sensitive to the dust composition along the line of sight, EREBUS will provide a wealth of information about the spatial distribution and dynamic behaviour of the carrier(s). The mission proposes to deploy a satellite observatory equipped with a coarse UV spectrograph to map the extinction curve variability in the Milky Way in 3 dimensions and in the Local Group in 2 dimensions. In this paper, we discuss the scientific goals for the project, discuss a proposed observation strategy using an iterative process to develop a hierarchical map, and finally outline the instrument requirements and preliminary spacecraft architecture

EREBUS: the EuRopean Extinction BUmp Survey

International audienceDust in the Interstellar Medium (ISM) is intimately linked to the life cycle of stars. Despite being of such fundamental importance to galaxy evolution, the dynamic behaviour and composition of the ISM are not yet fully understood. Observations of reddened Milky Way OB stars have revealed a strong UV extinction feature around 2175 Å and a precipitous extinction rise to the far UV along the lines of sight. Whilst the carrier(s) for this are at present still being debated, multiple laboratory studies suggest carbonate grains to be the key constituent. EREBUS is a mission concept being developed to study the composition of the ISM in both the Milky Way and Local Group Galaxies, primarily by mapping the spatial distribution of the UV extinction features. As these features are sensitive to the dust composition along the line of sight, EREBUS will provide a wealth of information about the spatial distribution and dynamic behaviour of the carrier(s). The mission proposes to deploy a satellite observatory equipped with a coarse UV spectrograph to map the extinction curve variability in the Milky Way in 3 dimensions and in the Local Group in 2 dimensions. In this paper, we discuss the scientific goals for the project, discuss a proposed observation strategy using an iterative process to develop a hierarchical map, and finally outline the instrument requirements and preliminary spacecraft architecture

The CMS Phase-1 Pixel Detector Upgrade

The CMS detector at the CERN LHC features a silicon pixel detector as its innermost subdetector. The original CMS pixel detector has been replaced with an upgraded pixel system (CMS Phase-1 pixel detector) in the extended year-end technical stop of the LHC in 2016/2017. The upgraded CMS pixel detector is designed to cope with the higher instantaneous luminosities that have been achieved by the LHC after the upgrades to the accelerator during the first long shutdown in 2013–2014. Compared to the original pixel detector, the upgraded detector has a better tracking performance and lower mass with four barrel layers and three endcap disks on each side to provide hit coverage up to an absolute value of pseudorapidity of 2.5. This paper describes the design and construction of the CMS Phase-1 pixel detector as well as its performance from commissioning to early operation in collision data-taking

The DAQ and control system for the CMS Phase-1 pixel detector upgrade

In 2017 a new pixel detector was installed in the CMS detector. This so-called Phase-1 pixel detector features four barrel layers in the central region and three disks per end in the forward regions. The upgraded pixel detector requires an upgraded data acquisition (DAQ) system to accept a new data format and larger event sizes. A new DAQ and control system has been developed based on a combination of custom and commercial microTCA parts. Custom mezzanine cards on standard carrier cards provide a front-end driver for readout, and two types of front-end controller for configuration and the distribution of clock and trigger signals. Before the installation of the detector the DAQ system underwent a series of integration tests, including readout of the pilot pixel detector, which was constructed with prototype Phase-1 electronics and operated in CMS from 2015 to 2016, quality assurance of the CMS Phase-1 detector during its assembly, and testing with the CMS Central DAQ. This paper describes the Phase-1 pixel DAQ and control system, along with the integration tests and results. A description of the operational experience and performance in data taking is included

The DAQ and control system for the CMS Phase-1 pixel detector upgrade

Abstract: In 2017 a new pixel detector was installed in the CMS detector. This so-called Phase-1 pixel detector features four barrel layers in the central region and three disks per end in the forward regions. The upgraded pixel detector requires an upgraded data acquisition (DAQ) system to accept a new data format and larger event sizes. A new DAQ and control system has been developed based on a combination of custom and commercial microTCA parts. Custom mezzanine cards on standard carrier cards provide a front-end driver for readout, and two types of front-end controller for configuration and the distribution of clock and trigger signals. Before the installation of the detector the DAQ system underwent a series of integration tests, including readout of the pilot pixel detector, which was constructed with prototype Phase-1 electronics and operated in CMS from 2015 to 2016, quality assurance of the CMS Phase-1 detector during its assembly, and testing with the CMS Central DAQ. This paper describes the Phase-1 pixel DAQ and control system, along with the integration tests and results. A description of the operational experience and performance in data taking is included