13 research outputs found
Recommended from our members
Polymer mechanochemistry-enabled pericyclic reactions
Over the past decades, it became clear that next to heat and light, pericyclic reactions can be induced mechanochemically when the reacting motifs are embedded as latent force-responsive groups (mechanophores) into polymer architectures. Not only does this enable a variety of functions and applications on a material level, but moreover grants access to symmetry-forbidden reaction products with respect to the Woodward-Hoffmann rules. The latter indicates that polymer mechanochemistry follows its own set of rules that, however, regarding underlying mechanisms and design rationales is far from being holistically understood. Here we review the existing body of literature and identify common structural features and substitution prerequisites to the polymer framework shining light on the differences between polymer mechanochemical pericyclic reactions and their traditional counterparts. By this, we believe to contribute to the major challenge of not only retrospectively describing force-induced reactivity but eventually finding a common molecular design guideline. © The Royal Society of Chemistry 2020
Interaction of differently functionalized fluorescent silica nanoparticles with neural stem- and tissue-type cells.
Abstract Engineered amorphous silica nanoparticles (SiO2 NPs), due to simple and low cost production, are increasingly used in commercial products and produced on an industrial scale. Despite the potential benefits, there is a concern that exposure to certain types of SiO2 NPs may lead to adverse health effects. As some NPs can cross the blood--brain barrier and may, in addition, reach the central nervous system through the nasal epithelium, this study addresses the responses of different neural tissue-type cells including neural stem cells, neurons, astrocytes and microglia cells to increasing doses of 50 nm fluorescent core/shell SiO2 NPs with different [-NH2, -SH and polyvinylpyrrolidone (PVP)] surface chemistry. The SiO2 NPs are characterized using a variety of physicochemical methods. Assays of cytotoxicity and cellular metabolism indicates that SiO2 NPs cause cell death only at high particle doses, except PVP-coated SiO2 NPs which do not harm cells even at very high concentrations. All SiO2 NPs, except those coated with PVP, form large agglomerates in physiological solutions and adsorb a variety of proteins. Except PVP-NPs, all SiO2 NPs adhere strongly to cell surfaces, but internalization differs depending on neural cell type. Neural stem cells and astrocytes internalize plain SiO2, SiO2-NH2 and SiO2-SH NPs, while neurons do not take up any NPs. The data indicates that the PVP coat, by lowering the particle-biomolecular component interactions, reduces the biological effects of SiO2 NPs on the investigated neural cells
Is the toxic potential of nanosilver dependent on its size?
Background: Nanosilver is one of the most commonly used engineered nanomaterials (ENMs). In our study we focused on assessing the size-dependence of the toxicity of nanosilver (Ag ENMs), utilising materials of three sizes (50, 80 and 200 nm) synthesized by the same method, with the same chemical composition, charge and coating. Methods: Uptake and localisation (by Transmission Electron Microscopy), cell proliferation (Relative growth activity) and cytotoxic effects (Plating efficiency), inflammatory response (induction of IL-8 and MCP-1 by Enzyme linked immune sorbent assay), DNA damage (strand breaks and oxidised DNA lesions by the Comet assay) were all assessed in human lung carcinoma epithelial cells (A549), and the mutagenic potential of ENMs (Mammalian hprt gene mutation test) was assessed in V79-4 cells as per the OECD protocol. Detailed physico-chemical characterization of the ENMs was performed in water and in biological media as a prerequisite to assessment of their impacts on cells. To study the relationship between the surface area of the ENMs and the number of ENMs with the biological response observed, Ag ENMs concentrations were recalculated from g/cm2 to ENMs cm2/cm2 and ENMs/cm2. Results. Studied Ag ENMs are cytotoxic and cytostatic, and induced strand breaks, DNA oxidation, inflammation and gene mutations. Results expressed in mass unit [g/cm2] suggested that the toxicity of Ag ENMs is size dependent with 50 nm being most toxic. However, re-calculation of Ag ENMs concentrations from mass unit to surface area and number of ENMs per cm2 highlighted that 200 nm Ag ENMs, are the most toxic. Results from hprt gene mutation assay showed that Ag ENMs 200 nm are the most mutagenic irrespective of the concentration unit expressed. Conclusion: We found that the toxicity of Ag ENMs is not always size dependent. Strong cytotoxic and genotoxic effects were observed in cells exposed to Ag ENMs 50 nm, but Ag ENMs 200 nm had the most mutagenic potential. Additionally, we showed that expression of concentrations of ENMs in mass units is not representative. Number of ENMs or surface area of ENMs (per cm2) seem more precise units with which to compare the toxicity of different ENMs.(VLID)156960
Particle and Fibre Toxicology / Impact of nanosilver on various DNA lesions and HPRT gene mutations : effects of charge and surface coating
Background: The main goal of this research was to study the interactions of a fully characterized set of silver nanomaterials (Ag ENMs) with cells in vitro, according to the standards of Good Laboratory Practices (GLP), to assure the quality of nanotoxicology research. We were interested in whether Ag ENMs synthesized by the same method, with the same size distribution, shape and specific surface area, but with different charges and surface compositions could give different biological responses. Methods: A range of methods and toxicity endpoints were applied to study the impacts of interaction of the Ag ENMs with TK6 cells. As tests of viability, relative growth activity and trypan blue exclusion were applied. Genotoxicity was evaluated by the alkaline comet assay for detection of strand breaks and oxidized purines. The mutagenic potential of Ag ENMs was investigated with the in vitro HPRT gene mutation test on V79-4 cells according to the OECD protocol. Ag ENM agglomeration, dissolution as well as uptake and distribution within the cells were investigated as crucial aspects of Ag ENM toxicity. Ag ENM stabilizers were included in addition to positive and negative controls. Results: Different cytotoxic effects were observed including membrane damage, cell cycle arrest and cell death. Ag ENMs also induced various kinds of DNA damage including strand breaks and DNA oxidation, and caused gene mutation. We found that positive Ag ENMs had greater impact on cyto- and genotoxicity than did Ag ENMs with neutral or negative charge, assumed to be related to their greater uptake into cells and to their presence in the nucleus and mitochondria, implying that Ag ENMs might induce toxicity by both direct and indirect mechanisms.
Conclusion: We showed that Ag ENMs could be cytotoxic, genotoxic and mutagenic. Our experiments with the HPRT gene mutation assay demonstrated that surface chemical composition plays a significant role in Ag ENM toxicity.(VLID)186337
Impact of nanosilver on various DNA lesions and HPRT gene mutations – effects of charge and surface coating
Altered characteristics of silica nanoparticles in bovine and human serum: the importance of nanomaterial characterization prior to its toxicological evaluation
This is an open access article distributed under the terms of the Creative Commons Attribution License.[Background]: Many toxicological studies on silica nanoparticles (NPs) have been reported, however, the literature often shows various conclusions concerning the same material. This is mainly due to a lack of sufficient NPs characterization as synthesized as well as in operando. Many characteristics of NPs may be affected by the chemistry of their surroundings and the presence of inorganic and biological moieties. Consequently, understanding the behavior of NPs at the time of toxicological assay may play a crucial role in the interpretation of its results. The present study examines changes in properties of differently functionalized fluorescent 50 nm silica NPs in a variety of environments and assesses their ability to absorb proteins from cell culture medium containing either bovine or human serum. [Methods]: The colloidal stability depending on surface functionalization of NPs, their concentration and time of exposure was investigated in water, standard biological buffers, and cell culture media by dynamic light scattering (DLS), zeta potential measurements and transmission electron microscopy (TEM). Interactions of the particles with biological media were investigated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) in bovine and human serum, and extracted proteins were assessed using matrix-assisted laser desorption/ionization-time of flight technique (MALDI-TOF). [Results]: It was recognized that all of the studied silica NPs tended to agglomerate after relatively short time in buffers and biological media. The agglomeration depended not only on the NPs functionalization but also on their concentration and the incubation time. Agglomeration was much diminished in a medium containing serum. The protein corona formation depended on time and functionalization of NP, and varied significantly in different types of serum. [Conclusions]: Surface charge, ionic strength and biological molecules alter the properties of silica NPs and potentially affect their biological effects. The NPs surface in bovine serum and in human serum varies significantly, and it changes with incubation time. Consequently, the human serum, rather than the animal serum, should be used while conducting in vitro or in vivo studies concerning humans. Moreover, there is a need to pre-incubate NPs in the serum to control the composition of the bio-nano-composite that would be present in the human body. © 2013 Izak-Nau et al.; licensee BioMed Central Ltd.This study was supported by the EU 7th Framework Programme, Marie Curie Actions, Network for Initial Training NanoTOES (PITN-GA-2010-264506),Peer Reviewe
Interaction of differently functionalized fluorescent silica nanoparticles with neural stem- and tissue-type cells
Engineered amorphous silica nanoparticles (SiO2 NPs), due to simple and low cost production, are increasingly used in commercial products and produced on an industrial scale. Despite the potential benefits, there is a concern that exposure to certain types of SiO2 NPs may lead to adverse health effects. As some NPs can cross the blood--brain barrier and may, in addition, reach the central nervous system through the nasal epithelium, this study addresses the responses of different neural tissue-type cells including neural stem cells, neurons, astrocytes and microglia cells to increasing doses of 50 nm fluorescent core/shell SiO2 NPs with different [–NH2, –SH and polyvinylpyrrolidone (PVP)] surface chemistry. The SiO2 NPs are characterized using a variety of physicochemical methods. Assays of cytotoxicity and cellular metabolism indicates that SiO2 NPs cause cell death only at high particle doses, except PVP-coated SiO2 NPs which do not harm cells even at very high concentrations. All SiO2 NPs, except those coated with PVP, form large agglomerates in physiological solutions and adsorb a variety of proteins. Except PVP-NPs, all SiO2 NPs adhere strongly to cell surfaces, but internalization differs depending on neural cell type. Neural stem cells and astrocytes internalize plain SiO2, SiO2–NH2 and SiO2–SH NPs, while neurons do not take up any NPs. The data indicates that the PVP coat, by lowering the particle–biomolecular component interactions, reduces the biological effects of SiO2 NPs on the investigated neural cells.This study was supported by the EU seventh framework program, Marie Curie Actions, Network for Initial Training NanoTOES (PITN-GA-2010-264506), www.nanotoes.eu.Peer Reviewe
Altered characteristics of silica nanoparticles in bovine and human serum : The importance of nanomaterial characterization prior to its toxicological evaluation
Background: Many toxicological studies on silica nanoparticles (NPs) have been reported, however, the literature often shows various conclusions concerning the same material. This is mainly due to a lack of sufficient NPs characterization as synthesized as well as in operando. Many characteristics of NPs may be affected by the chemistry of their surroundings and the presence of inorganic and biological moieties. Consequently, understanding the behavior of NPs at the time of toxicological assay may play a crucial role in the interpretation of its results. The present study examines changes in properties of differently functionalized fluorescent 50 nm silica NPs in a variety of environments and assesses their ability to absorb proteins from cell culture medium containing either bovine or human serum.Methods: The colloidal stability depending on surface functionalization of NPs, their concentration and time of exposure was investigated in water, standard biological buffers, and cell culture media by dynamic light scattering (DLS), zeta potential measurements and transmission electron microscopy (TEM). Interactions of the particles with biological media were investigated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) in bovine and human serum, and extracted proteins were assessed using matrix-assisted laser desorption/ionization-time of flight technique (MALDI-TOF).Results: It was recognized that all of the studied silica NPs tended to agglomerate after relatively short time in buffers and biological media. The agglomeration depended not only on the NPs functionalization but also on their concentration and the incubation time. Agglomeration was much diminished in a medium containing serum. The protein corona formation depended on time and functionalization of NP, and varied significantly in different types of serum.Conclusions: Surface charge, ionic strength and biological molecules alter the properties of silica NPs and potentially affect their biological effects. The NPs surface in bovine serum and in human serum varies significantly, and it changes with incubation time. Consequently, the human serum, rather than the animal serum, should be used while conducting in vitro or in vivo studies concerning humans. Moreover, there is a need to pre-incubate NPs in the serum to control the composition of the bio-nano-composite that would be present in the human body
Shear-Induced Structural and Functional Transformations of Poly(N-vinylcaprolactam) Microgels
We here performed an in-depth investigation of the behavior of microgels (mu gels) and their associated physicochemical transformations under shear force. Thermo- and mechanoresponsive poly(N-vinylcaprolactam) (PVCL) mu gels (d similar to 400 nm) cross-linked with a force-responsive mechanofluorophore in different crosslinking degrees were synthesized and examined. Fluorescence spectroscopy (FS), confocal laser scanning microscopy (CLSM), dynamic light scattering (DLS), cryogenic transmission electron microscopy (cryoTEM), high-resolution magic-angle sample spinning (HRMAS) nuclear magnetic resonance (NMR), Fourier-transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) are used to characterize the mu gels before, during, and after shearing with different shear rates and intensities. The obtained results suggest nonuniform structural features consisting of a softer outer "corona" and a harder particle "core" (cross-linker-rich). Upon shearing, the mu gels rapidly lose their corona and the cores agglomerate altering mu gel functionality. Surprisingly, mu gels degrade promptly, even when subjected to low shear forces, such as the extrusion through a needle. This has potential implications for all applications in which shear forces in solution are expected, including extrusion, injection, and filtration processes involving colloidal mu gel solutions as well as circulation within the bloodstream of living organisms
Shear-Induced Structural and Functional Transformations of Poly(N-vinylcaprolactam) Microgels
We here performed an in-depth investigation of the behavior of microgels (mu gels) and their associated physicochemical transformations under shear force. Thermo- and mechanoresponsive poly(N-vinylcaprolactam) (PVCL) mu gels (d similar to 400 nm) cross-linked with a force-responsive mechanofluorophore in different crosslinking degrees were synthesized and examined. Fluorescence spectroscopy (FS), confocal laser scanning microscopy (CLSM), dynamic light scattering (DLS), cryogenic transmission electron microscopy (cryoTEM), high-resolution magic-angle sample spinning (HRMAS) nuclear magnetic resonance (NMR), Fourier-transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS) are used to characterize the mu gels before, during, and after shearing with different shear rates and intensities. The obtained results suggest nonuniform structural features consisting of a softer outer "corona" and a harder particle "core" (cross-linker-rich). Upon shearing, the mu gels rapidly lose their corona and the cores agglomerate altering mu gel functionality. Surprisingly, mu gels degrade promptly, even when subjected to low shear forces, such as the extrusion through a needle. This has potential implications for all applications in which shear forces in solution are expected, including extrusion, injection, and filtration processes involving colloidal mu gel solutions as well as circulation within the bloodstream of living organisms