2,691 research outputs found

    Ectopy on a single 12‐lead ECG, incident cardiac myopathy, and death in the community

    Get PDF
    BackgroundAtrial fibrillation and heart failure are 2 of the most common diseases, yet ready means to identify individuals at risk are lacking. The 12-lead ECG is one of the most accessible tests in medicine. Our objective was to determine whether a premature atrial contraction observed on a standard 12-lead ECG would predict atrial fibrillation and mortality and whether a premature ventricular contraction would predict heart failure and mortality.Methods and resultsWe utilized the CHS (Cardiovascular Health) Study, which followed 5577 participants for a median of 12 years, as the primary cohort. The ARIC (Atherosclerosis Risk in Communities Study), the replication cohort, captured data from 15 792 participants over a median of 22 years. In the CHS, multivariable analyses revealed that a baseline 12-lead ECG premature atrial contraction predicted a 60% increased risk of atrial fibrillation (hazard ratio, 1.6; 95% CI, 1.3-2.0; P<0.001) and a premature ventricular contraction predicted a 30% increased risk of heart failure (hazard ratio, 1.3; 95% CI, 1.0-1.6; P=0.021). In the negative control analyses, neither predicted incident myocardial infarction. A premature atrial contraction was associated with a 30% increased risk of death (hazard ratio, 1.3; 95% CI, 1.1-1.5; P=0.008) and a premature ventricular contraction was associated with a 20% increased risk of death (hazard ratio, 1.2; 95% CI, 1.0-1.3; P=0.044). Similarly statistically significant results for each analysis were also observed in ARIC.ConclusionsBased on a single standard ECG, a premature atrial contraction predicted incident atrial fibrillation and death and a premature ventricular contraction predicted incident heart failure and death, suggesting that this commonly used test may predict future disease

    Studies of Minerals, Organic and Biogenic Materials through Time-Resolved Raman Spectroscopy

    Get PDF
    A compact remote Raman spectroscopy system was developed at NASA Langley Research center and was previously demonstrated for its ability to identify chemical composition of various rocks and minerals. In this study, the Raman sensor was utilized to perform time-resolved Raman studies of various samples such as minerals and rocks, Azalea leaves and a few fossil samples. The Raman sensor utilizes a pulsed 532 nm Nd:YAG laser as excitation source, a 4-inch telescope to collect the Raman-scattered signal from a sample several meters away, a spectrograph equipped with a holographic grating, and a gated intensified CCD (ICCD) camera system. Time resolved Raman measurements were carried out by varying the gate delay with fixed short gate width of the ICCD camera, allowing measurement of both Raman signals and fluorescence signals. Rocks and mineral samples were characterized including marble, which contain CaCO3. Analysis of the results reveals the short (approx.10-13 s) lifetime of the Raman process, and shows that Raman spectra of some mineral samples contain fluorescence emission due to organic impurities. Also analyzed were a green (pristine) and a yellow (decayed) sample of Gardenia leaves. It was observed that the fluorescence signals from the green and yellow leaf samples showed stronger signals compared to the Raman lines. Moreover, it was also observed that the fluorescence of the green leaf was more intense and had a shorter lifetime than that of the yellow leaf. For the fossil samples, Raman shifted lines could not be observed due the presence of very strong short-lived fluorescence

    Design and Build a Compact Raman Sensor for Identification of Chemical Composition

    Get PDF
    A compact remote Raman sensor system was developed at NASA Langley Research Center. This sensor is an improvement over the previously reported system, which consisted of a 532 nm pulsed laser, a 4-inch telescope, a spectrograph, and an intensified charge-coupled devices (CCD) camera. One of the attractive features of the previous system was its portability, thereby making it suitable for applications such as planetary surface explorations, homeland security and defense applications where a compact portable instrument is important. The new system was made more compact by replacing bulky components with smaller and lighter components. The new compact system uses a smaller spectrograph measuring 9 x 4 x 4 in. and a smaller intensified CCD camera measuring 5 in. long and 2 in. in diameter. The previous system was used to obtain the Raman spectra of several materials that are important to defense and security applications. Furthermore, the new compact Raman sensor system is used to obtain the Raman spectra of a diverse set of materials to demonstrate the sensor system's potential use in the identification of unknown materials

    Remote Raman Sensor System for Testing of Rocks and Minerals

    Get PDF
    Recent and future explorations of Mars and lunar surfaces through rovers and landers have spawned great interest in developing an instrument that can perform in-situ analysis of minerals on planetary surfaces. Several research groups have anticipated that for such analysis, Raman spectroscopy is the best suited technique because it can unambiguously provide the composition and structure of a material. A remote pulsed Raman spectroscopy system for analyzing minerals was demonstrated at NASA Langley Research Center in collaboration with the University of Hawaii. This system utilizes a 532 nm pulsed laser as an excitation wavelength, and a telescope with a 4-inch aperture for collecting backscattered radiation. A spectrograph equipped with a super notch filter for attenuating Rayleigh scattering is used to analyze the scattered signal. To form the Raman spectrum, the spectrograph utilizes a holographic transmission grating that simultaneously disperses two spectral tracks on the detector for increased spectral range. The spectrum is recorded on an intensified charge-coupled device (ICCD) camera system, which provides high gain to allow detection of inherently weak Stokes lines. To evaluate the performance of the system, Raman standards such as calcite and naphthalene are analyzed. Several sets of rock and gemstone samples obtained from Ward s Natural Science are tested using the Raman spectroscopy system. In addition, Raman spectra of combustible substances such acetone and isopropanol are also obtained. Results obtained from those samples and combustible substances are presented

    EveTAR: Building a Large-Scale Multi-Task Test Collection over Arabic Tweets

    Full text link
    This article introduces a new language-independent approach for creating a large-scale high-quality test collection of tweets that supports multiple information retrieval (IR) tasks without running a shared-task campaign. The adopted approach (demonstrated over Arabic tweets) designs the collection around significant (i.e., popular) events, which enables the development of topics that represent frequent information needs of Twitter users for which rich content exists. That inherently facilitates the support of multiple tasks that generally revolve around events, namely event detection, ad-hoc search, timeline generation, and real-time summarization. The key highlights of the approach include diversifying the judgment pool via interactive search and multiple manually-crafted queries per topic, collecting high-quality annotations via crowd-workers for relevancy and in-house annotators for novelty, filtering out low-agreement topics and inaccessible tweets, and providing multiple subsets of the collection for better availability. Applying our methodology on Arabic tweets resulted in EveTAR , the first freely-available tweet test collection for multiple IR tasks. EveTAR includes a crawl of 355M Arabic tweets and covers 50 significant events for which about 62K tweets were judged with substantial average inter-annotator agreement (Kappa value of 0.71). We demonstrate the usability of EveTAR by evaluating existing algorithms in the respective tasks. Results indicate that the new collection can support reliable ranking of IR systems that is comparable to similar TREC collections, while providing strong baseline results for future studies over Arabic tweets

    Enhancing lepton flavour violation in the supersymmetric inverse seesaw beyond the dipole contribution

    Get PDF
    In minimal supersymmetric models the ZZ-penguin usually provides sub-dominant contributions to charged lepton flavour violating observables. In this study, we consider the supersymmetric inverse seesaw in which the non-minimal particle content allows for dominant contributions of the ZZ-penguin to several lepton flavour violating observables. In particular, and due to the low-scale (TeV) seesaw, the penguin contribution to, for instance, \Br(\mu \to 3e) and μe\mu-e conversion in nuclei, allows to render some of these observables within future sensitivity reach. Moreover, we show that in this framework, the ZZ-penguin exhibits the same non-decoupling behaviour which had previously been identified in flavour violating Higgs decays in the Minimal Supersymmetric Standard Model.Comment: 29 pages, 9 figures, 4 tables; v2: minor corrections, version to appear in JHE

    A General Study on Langevin Equations of Arbitrary Order

    Get PDF
    In this paper, the broad study depends on Langevin differential equations (LDE) of arbitrary order.The fractional order is in terms of ψ-Hilfer fractional operator. This work reveals the dynamicalbehaviour such as existence, uniqueness and stability solutions for LDE involving ψ-Hilfer fractionalerivative (HFD). Thus the fractional LDE with boundary condition, impulsive effect and nonlocalconditions are taken in account to prove the result

    Two loop electroweak corrections to BˉXsγ\bar B\rightarrow X_s\gamma and Bs0μ+μB_s^0\rightarrow \mu^+\mu^- in the B-LSSM

    Full text link
    The rare decays BˉXsγ\bar B\rightarrow X_s\gamma and Bs0μ+μB_s^0\rightarrow \mu^+\mu^- are important to research new physics beyond standard model. In this work, we investigate two loop electroweak corrections to BˉXsγ\bar B\rightarrow X_s\gamma and Bs0μ+μB_s^0\rightarrow \mu^+\mu^- in the minimal supersymmetric extension of the SM with local BLB-L gauge symmetry (B-LSSM), under a minimal flavor violating assumption for the soft breaking terms. In this framework, new particles and new definition of squarks can affect the theoretical predictions of these two processes, with respect to the MSSM. Considering the constraints from updated experimental data, the numerical results show that the B-LSSM can fit the experimental data for the branching ratios of BˉXsγ\bar B\rightarrow X_s\gamma and Bs0μ+μB_s^0\rightarrow \mu^+\mu^-. The results of the rare decays also further constrain the parameter space of the B-LSSM.Comment: 33 pages, 9 figures, Published in EPJ

    Prospects for terahertz imaging the human skin cancer with the help of gold-nanoparticles-based terahertz-to-infrared converter

    Full text link
    The design is suggested, and possible operation parameters are discussed, of an instrument to inspect a skin cancer tumour in the terahertz (THz) range, transferring the image into the infrared (IR) and making it visible with the help of standard IR camera. The central element of the device is the THz-to-IR converter, a Teflon or silicon film matrix with embedded 8.5 nm diameter gold nanoparticles. The use of external THz source for irradiating the biological tissue sample is presumed. The converter's temporal characteristics enable its performance in a real-time scale. The details of design suited for the operation in transmission mode (in vitro) or on the human skin in reflection mode {in vivo) are specified.Comment: To be published in the proceedings of the FANEM2018 workshop - Minsk, 3-5 June 201
    corecore