System studies of forest-based biomass gasification

Bioenergy will play an important role in reaching the EU targets for renewable energy. Sweden, with abundant forest resources and a well-established forest industry, has a key position regarding modern biomass use. Biomass gasification (BMG) offers several advantages compared to biomass combustion-based processes, the most prominent being the possibility for downstream conversion to motor fuels (biofuels), and the potential for higher electrical efficiency if used for electricity generation in a biomass integrated gasification combined cycle (BIGCC). BMG-based processes in general have a considerable surplus of heat, which facilitates integration with district heating or industrial processes. In this thesis integration of large-scale BMG, for biofuel or electricity production, with other parts of the energy system is analysed. Focus is on forest-based biomass, with the analysis including techno-economic aspects as well as considerations regarding effects on global fossil CO2 emissions. The analysis has been done using two approaches – bottom-up with detailed case studies of BMG integrated with local systems, and top-down with BMG studied on a European scale. The results show that BMG-based biofuel or electricity production can constitute economically interesting alternatives for integration with district heating or pulp and paper production. However, due to uncertainties concerning future energy market conditions and due to the large capital commitment of investment in BMG technology, forceful economic support policies will be needed if BMG is a desired route for the future energy system, unless oil and electricity prices are high enough to provide sufficient incentives for BMG-based biofuel or electricity production. While BMG-based biofuel production could make integration with either district heating or pulp and paper production economically attractive, BIGCC shows considerably more promise if integrated with pulp and paper production than with district heating. Bioenergy use is often considered CO2-neutral, because uptake in growing plants is assumed to fully balance the CO2 released when the biomass is combusted. As one of the alternatives in this thesis, biomass is viewed as limited. This means that increased use of bioenergy in one part of the energy system limits the amount of biomass available for other applications, thus increasing the CO2 emissions for those applications. The results show that when such marginal effects of increased biomass use are acknowledged, the CO2 mitigation potential for BMG-based biofuel production becomes highly uncertain. In fact, most of the BMG-based biofuel cases studied in this thesis would lead to an increase rather than the desired decrease of global CO2 emissions, when considering biomass as limited.Bioenergi spelar en viktig roll för att nå EU:s mål för förnybar energi. Sverige har med sina goda skogstillgångar och sin väletablerade skogsindustri en nyckelposition vad gäller modern bioenergianvändning. Förgasning av biomassa har flera fördelar jämfört med förbränningsbaserade processer - i synnerhet möjligheten att konvertera lågvärdiga råvaror till exempelvis fordonsdrivmedel. Används gasen istället för elproduktion kan en högre verkningsgrad nås om gasen används i en kombicykel, jämfört med i en konventionell ångturbincykel. De förgasningsbaserade processerna har i allmänhet ett betydande överskott av värme, vilket möjliggör integrering med fjärrvärmesystem eller industriella processer. I denna avhandling analyseras integrering av storskalig biomassaförgasning för drivmedelseller elproduktion, med andra delar av energisystemet. Skogsbaserad biomassa är i fokus och analysen behandlar såväl teknoekonomiska aspekter, som effekter på globala fossila CO2-utsläpp. Forskningen har gjorts på två olika systemnivåer - dels i form av detaljerade fallstudier av biomassaförgasning integrerat med lokala svenska system, dels i form av systemstudier på europeisk nivå. Resultaten visar att förgasningsbaserad biodrivmedels- eller elproduktion kan komma att utgöra ekonomiskt intressanta alternativ för integrering med fjärrvärme eller massa- och papperstillverkning. På grund av osäkerheter i fråga om framtida energimarknadsförhållanden och på grund av de höga kapitalkostnaderna som investering i förgasningsanläggningar innebär, kommer kraftfulla ekonomiska styrmedel krävas om biomassaförgasning är en önskad utvecklingsväg för framtidens energisystem, såvida inte olje- och elpriserna är höga nog att i sig skapa tillräckliga incitament. Medan förgasningsbaserad drivmedelsproduktion kan vara ekonomiskt attraktivt att integrera med såväl fjärrvärme som med massa- och papperstillverkning, framstår förgasningsbaserad elproduktion som betydligt mer lovande vid integrering med massa- och papperstillverkning. Användning av bioenergi anses ofta vara CO2-neutralt, eftersom upptaget av CO2 i växande biomassa antas balansera den CO2 som frigörs när biomassan förbränns. Som ett av alternativen i denna avhandling ses biomassa som begränsad, vilket innebär att ökad användning av bioenergi i en del av energisystemet begränsar den tillgängliga mängden biomassa för andra användare, vilket leder till ökade CO2-utsläpp för dessa. Resultaten visar att när hänsyn tas till denna typ av marginella effekter av ökad biomassaanvändning, blir potentialen för minskade globala CO2-utsläpp med hjälp av förgasningsbaserade tillämpningar mycket osäker. I själva verket skulle de flesta av de förgasningsbaserade drivmedel som studerats i denna avhandling leda till en utsläppsökning, snarare än den önskade minskningen

System studies of forest-based biomass gasification

Bioenergy will play an important role in reaching the EU targets for renewable energy. Sweden, with abundant forest resources and a well-established forest industry, has a key position regarding modern biomass use. Biomass gasification (BMG) offers several advantages compared to biomass combustion-based processes, the most prominent being the possibility for downstream conversion to motor fuels (biofuels), and the potential for higher electrical efficiency if used for electricity generation in a biomass integrated gasification combined cycle (BIGCC). BMG-based processes in general have a considerable surplus of heat, which facilitates integration with district heating or industrial processes. In this thesis integration of large-scale BMG, for biofuel or electricity production, with other parts of the energy system is analysed. Focus is on forest-based biomass, with the analysis including techno-economic aspects as well as considerations regarding effects on global fossil CO2 emissions. The analysis has been done using two approaches – bottom-up with detailed case studies of BMG integrated with local systems, and top-down with BMG studied on a European scale. The results show that BMG-based biofuel or electricity production can constitute economically interesting alternatives for integration with district heating or pulp and paper production. However, due to uncertainties concerning future energy market conditions and due to the large capital commitment of investment in BMG technology, forceful economic support policies will be needed if BMG is a desired route for the future energy system, unless oil and electricity prices are high enough to provide sufficient incentives for BMG-based biofuel or electricity production. While BMG-based biofuel production could make integration with either district heating or pulp and paper production economically attractive, BIGCC shows considerably more promise if integrated with pulp and paper production than with district heating. Bioenergy use is often considered CO2-neutral, because uptake in growing plants is assumed to fully balance the CO2 released when the biomass is combusted. As one of the alternatives in this thesis, biomass is viewed as limited. This means that increased use of bioenergy in one part of the energy system limits the amount of biomass available for other applications, thus increasing the CO2 emissions for those applications. The results show that when such marginal effects of increased biomass use are acknowledged, the CO2 mitigation potential for BMG-based biofuel production becomes highly uncertain. In fact, most of the BMG-based biofuel cases studied in this thesis would lead to an increase rather than the desired decrease of global CO2 emissions, when considering biomass as limited.Bioenergi spelar en viktig roll för att nå EU:s mål för förnybar energi. Sverige har med sina goda skogstillgångar och sin väletablerade skogsindustri en nyckelposition vad gäller modern bioenergianvändning. Förgasning av biomassa har flera fördelar jämfört med förbränningsbaserade processer - i synnerhet möjligheten att konvertera lågvärdiga råvaror till exempelvis fordonsdrivmedel. Används gasen istället för elproduktion kan en högre verkningsgrad nås om gasen används i en kombicykel, jämfört med i en konventionell ångturbincykel. De förgasningsbaserade processerna har i allmänhet ett betydande överskott av värme, vilket möjliggör integrering med fjärrvärmesystem eller industriella processer. I denna avhandling analyseras integrering av storskalig biomassaförgasning för drivmedelseller elproduktion, med andra delar av energisystemet. Skogsbaserad biomassa är i fokus och analysen behandlar såväl teknoekonomiska aspekter, som effekter på globala fossila CO2-utsläpp. Forskningen har gjorts på två olika systemnivåer - dels i form av detaljerade fallstudier av biomassaförgasning integrerat med lokala svenska system, dels i form av systemstudier på europeisk nivå. Resultaten visar att förgasningsbaserad biodrivmedels- eller elproduktion kan komma att utgöra ekonomiskt intressanta alternativ för integrering med fjärrvärme eller massa- och papperstillverkning. På grund av osäkerheter i fråga om framtida energimarknadsförhållanden och på grund av de höga kapitalkostnaderna som investering i förgasningsanläggningar innebär, kommer kraftfulla ekonomiska styrmedel krävas om biomassaförgasning är en önskad utvecklingsväg för framtidens energisystem, såvida inte olje- och elpriserna är höga nog att i sig skapa tillräckliga incitament. Medan förgasningsbaserad drivmedelsproduktion kan vara ekonomiskt attraktivt att integrera med såväl fjärrvärme som med massa- och papperstillverkning, framstår förgasningsbaserad elproduktion som betydligt mer lovande vid integrering med massa- och papperstillverkning. Användning av bioenergi anses ofta vara CO2-neutralt, eftersom upptaget av CO2 i växande biomassa antas balansera den CO2 som frigörs när biomassan förbränns. Som ett av alternativen i denna avhandling ses biomassa som begränsad, vilket innebär att ökad användning av bioenergi i en del av energisystemet begränsar den tillgängliga mängden biomassa för andra användare, vilket leder till ökade CO2-utsläpp för dessa. Resultaten visar att när hänsyn tas till denna typ av marginella effekter av ökad biomassaanvändning, blir potentialen för minskade globala CO2-utsläpp med hjälp av förgasningsbaserade tillämpningar mycket osäker. I själva verket skulle de flesta av de förgasningsbaserade drivmedel som studerats i denna avhandling leda till en utsläppsökning, snarare än den önskade minskningen

Introducing hydrothermal carbonization to sewage sludge treatment systems—a way of improving energy recovery and economic performance?

Hydrothermal carbonization (HTC) can mitigate the disposal costs of sewage sludge in a wastewater treatment plant. This study analyzes the impact of integrating HTC with anaerobic digestion (AD) and combustion from a combined energy and economic performance perspective. Net energy balance and investment opportunity are investigated for a number of technical scenarios considering i) different combinations of the technologies: AD + HTC, AD + thermal dryer + combustion, and AD + HTC + combustion, ii) different options for HTC process water treatment: wet oxidation (WO) + AD, and direct return to AD, and iii) different products: heat-only, heat and electricity, hydrochar, and phosphorus. The results show trade-offs between investment cost, self-supplement of heat, and output electricity when WO is used. In AD + HTC, net heat output decreases compared to the reference plant, but avoided disposal costs and hydrochar revenue result in profitable investment when the process water is directly returned to the AD. Although HTC has a lower heat demand than the thermal dryer, replacing the thermal dryer with HTC is only possible when AD, HTC, and combustion are connected, or when WO covers HTC’s heat demand. HTC may impair the electricity production because of the necessity for a high-temperature heat source, whereas the thermal dryer can utilize a low-temperature heat source. In conclusion, energy advantages of HTC in AD + HTC + combustion are insufficient to provide a promising investment opportunity due to high investment costs of HTC. The investment opportunity improves by co-combustion of hydrochar and external sludge.Validerad;2023;Nivå 2;2023-08-15 (joosat);Licens fulltext: CC BY LicenseThis article has previously appeared as a manuscript in a thesis.</p

Assessing the climate impact of district heating systems with combined heat and power production and industrial excess heat Assessing the climate impact of district heating systems with combined heat and power production and industrial excess heat

Abstract Heat demand is a large contributor to greenhouse gas (GHG) emissions in the European Union (EU), as heat is largely produced using fossil fuel resources. Extended use of district heating (DH) could reduce climate impact, as DH systems can distribute heat produced in efficient combined heat and power (CHP) plants and industrial excess heat, thus utilising heat that would otherwise be wasted. The difficulty to estimate and compare GHG emissions from DH systems can however constitute an obstacle to an expanded implementation of DH. There are several methods for GHG emission assessments that may be used with varying assumptions and system boundaries. The aim of this paper is to illuminate how methodological choices affect the results of studies estimating GHG emissions from DH systems, and to suggest how awareness of this can be used to identify possibilities for GHG emission reductions. DH systems with CHP production and industrial excess heat are analysed and discussed in a systems approach. We apply different methods for allocating GHG emissions between products and combine them with different system boundaries. In addition, we discuss the impact of resource efficiency on GHG emissions, using the framework of industrial symbiosis (IS). We conclude that assessments of the climate impact of DH systems should take local conditions and requirements into account. In order for heat from CHP production and industrial excess heat to be comparable, heat should be considered a by-product regardless of its origin. That could also reveal opportunities for GHG emission reductions

On the green transformation of the iron and steel industry: Market and competition aspects of hydrogen and biomass options

The iron and steel industry is a major emitter of carbon dioxide globally. To reduce their carbon footprint, the iron and steel industry pursue different decarbonization strategies, including deploying bio-based materials and energy carriers for reduction, carburisation and/or energy purposes along their value-chains. In this study two potential roles for biomass were analysed: (a) substituting for fossil fuels in iron-ore pellets induration and (b) carburisation of DRI (direct reduced iron) produced via fully hydrogen-based reduction. The purpose of the study was to analyse the regional demand-driven price and allocative effects of biomass assortments under different biomass demand scenarios for the Swedish iron and steel industry. Economic modelling was used in combination with spatial biomass supply assessments to predict the changes on relevant biomass markets. The results showed that the estimated demand increases for forest biomass will have significant regional price effects. Depending on scenario, the biomass demand will increase up to 25 percent, causing regional prices to more than doubling. In general, the magnitude of the price effects was driven by the volumes and types of biomasses needed in the different scenarios, with larger price effects for harvesting residues and industrial by-products compared to those of roundwood. A small price effect of roundwood means that the incentives for forest-owners to increase their harvests, and thus also the availability of harvest residues, are small. Flexibility in the feedstock sourcing (both regarding quality and geographic origin) will thus be important if forest biomass is to satisfy demands in iron and steel industry.Validerad;2024;Nivå 2;2024-04-08 (marisr);Full text license: CC BY 4.0;</p

Implications of system expansion for the assessment of well-to-wheel CO2 emissions from biomass-based transportation

In this paper we show the effects of expanding the system when evaluating well-to-wheel (WTW) CO2 emissions forbiomass-based transportation, to include the systems surrounding the biomass conversion system. Four different cases are considered: DME via black liquor gasification (BLG), methanol via gasification of solid biomass, lignocellulosic ethanol and electricity from a biomass integrated gasification combined cycle (BIGCC) used in a battery-powered electric vehicle (BPEV). All four cases are considered with as well as without carbon capture and storage (CCS). System expansion is used consistently for all flows. The results are compared with results from a conventional WTW study that only uses system expansion for certain co-product flows.It is shown that when expanding the system, biomass-based transportation does not necessarily contribute to decreased CO2 emissions and the results from this study in general indicate considerably lower CO2 mitigation potential than do the results from the conventional study used for comparison. It is shown that of particular importance are assumptions regarding future biomass use, as by expanding the system, future competition for biomass feedstock can be taken into account by assuming an alternative biomass usage. Assumptions regardingother surrounding systems, such as the transportation and the electricity systems are also shown to be ofsignificance.Of the four studied cases without CCS, BIGCC with the electricity used in a BPEV is the only case that consistently shows a potential for CO2 reduction when alternative use of biomass is considered. Inclusion of CCS is not a guarantee for achieving CO2 reduction, and in general the system effects are equivalent or larger than the effects of CCS. DME from BLG generally shows the highest CO2 emission reduction potential for the biofuel cases. However, neither of these options for biomass-based transportation can alone meet the needs of the transport sector. Therefore, a broader palette of solutions, including different production routes, different fuels and possibly also CCS, will be needed