Experimental Investigation on Spray Characteristics of Waste Cooking Oil Biodiesel/Diesel Blends at Different Injection Parameters

Biodiesel is a promising alternative solution for the energy crisis, as it is renewable, biodegradable, non - toxic and it has a fully competitive edge with petrol diesel in most technical aspects. Because of the increasing global request for diesel fuel consumption, consumption of non-renewable fossil fuels, exhaust emissions, all these led to search about alternative fuels. Biodiesel is one of the potential alternatives for depleting fossil fuels. Biodiesel fuel is an eco-friendly and renewable source of energy. Biodiesel fuel is an eco-friendly and renewable source of energy. Biodiesel is one of the best solutions and alternatives available to all countries of the world. Inedible plants and vegetable oils such as Jatropha oil, Karanji Pongamia oil, Neem oil, Jojoba oil, Cottonseed oil, Linseed oil, Mahua oil, Deccan hemp oil, Kusum oil, Orange oil, and Rubber seed oil were used as biodiesel in diesel engine. Biodiesel is produced by chemical methods from vegetable oils, but the use of vegetable oils is a high cost.Scientists searched for other sources and at the same time has a low cost. They found that waste cooking oil is the ideal solution to that problem. Four methods to minimize the high viscosity of vegetable oils to enable their use in common diesel engines without operational problems such as engine charges have been investigated: blending with petro diesel, pyrolysis, microemulsification (solvent blending), and transesterification. Transesterification is by far the most common method. Only the transesterification reaction leads to the products commonly known as biodiesel, i.e., alkyl esters of oils and fats. Biodiesel was produced from waste Cooking-oil by transesterification process have been applied for most countries to improve and raise the national energy return. Blends of WCOB and diesel were used instead of pure diesel fuel in diesel engine. However, the spray characteristic of the injected fuel depends on different parameters such as fuel injection pressure, the temperature of the injected fuel, ambient pressure, fuel viscosity, and fuel density.In internal combustion engines, such as the diesel engine used to conduct the experiment, a 20 mm window and a transparent glass box are used to facilitate the visualization of spray characteristics. The spray characteristics of the diesel/ waste cooking oil biodiesel blends fuel were studied experimentally at different injection pressure and temperature. Spray characteristics of biodiesel WCOB / diesel under various injection pressures of 150 to 300 bar and injection temperature of 25 to 275 ºC have been measured and illustrated by sparing the fuel blends in a surrounding area using a high-speed Digital camera. In this work, the biodiesel/diesel blend of B40D60 has been tested. The experimental data shows the WCOB biodiesel of B40D60 gives longer spray tip penetration and spray angle are smaller than those of diesel fuels at different pressure and temperature

Synthesis and biological activity of naphtho[1,2,6,5]pyrano[3,4-f]phthalazine- 4, 14-diones

415-41

Flow behavior and mechanical properties of multi-pass thermomechanically processed 7075 Al-alloy

Research on multi-pass hot processing of 7075 Al-alloy was rarely discussed. This study aims to design and evaluate different thermomechanical processing strategies (TMPS) to produce 3 mm-thick sheets of 7075 Al-alloy. A physical simulation was performed using the hot compression test of a Gleeble 3500 to study flow mechanisms and microstructural evolution, while an experimental investigation was carried out using a rolling mill to examine the effect of TMPS on the mechanical properties. Four hot forming strategies were designed and tested at a constant strain rate of 0.1 s−1 over a temperature range of 200–450 °C. These strategies involved applying a constant amount of deformation of 65–70% in single (SP), double (DP), triple (TP), and quadruple (QP) passes of thermomechanical processing to study the influence of multi-pass thermomechanical processing on the final mechanical properties and industrial feasibility. The microstructure analysis showed a significant refinement and more uniform distribution of precipitates with an increasing number of passes, as observed through optical micrographs and the full width at half maximum (FWHM)-position relationship of XRD data. The results indicate that QP is the optimum strategy for producing the best mechanical properties in the shortest production time

Sources of Information about Dietary Fibre: A Cross-Country Survey

Dietary fibre (DF) has been recognized as a major determinant for improvement of health. Hence the means of information through which people become aware of its benefits are crucial. This work aimed at studying the sources of information about DF, as a means to educate people about aspects related to healthy eating. Factors such as gender, level of education, living environment or country were evaluated as to their effect on the selection of sources and preferences. For this, a descriptive cross-sectional study by means of a questionnaire, applied to a non-probabilistic sample of 6010 participants from 10 countries in different continents (Europe, Africa and America), answered after informed consent by all participants. For the analysis were used several descriptive statistics tools, crosstabs and chi square test to assess the relations between some of the variables under study. The results showed that mostly the information about DF comes from the internet, but the participants recognize that television might be a most suitable way to disseminate information about DF. The results also indicated differences between genders, levels of education, living environments and countries. The internet, the preferred source of information, got highest scores for Hungary, for urban areas, for university level of education and for female gender. The radio, the least scored source of information, was preferred in Egypt, for men and with lower education (primary school). As a conclusion, people get information through the internet due to easy access. However, it is to some extent a risk given the impossibility to control de information made public on the internet. The role of health centers and hospitals as well as schools should definitely be increased, as a responsible way to ensure correct information

Level of information about dietary fibre: a study involving 10 Countries

Introduction: Dietary fibre (DF) is recognized as healthy for long, so that health claims are allowed by the European Food Safety Authority (EFSA) due to its proved benefits, extended but not only confined to many diseases of the gastrointestinal tract. Objective: This work intended to analyse the level of information about DF in 10 countries, situated in Europe, Africa and South America. Methods: A descriptive cross-sectional study was undertaken through a survey based on a questionnaire of self-response applied to a sample of 6010 participants. The data were lately treated by factor and cluster analyses, including validation methodologies. Results: Factor analysis showed that ten of the twelve items used to assess the knowledge about DF could be arranged into two factors: one related to health effects (α =0.854) and the other to the sources (α =0.644). Furthermore, cluster analysis showed that the participants could be divided into three groups: 1) Good knowledge about sources and health effects of DF; 2) Good knowledge about the sources of DF but poor knowledge about the health effects; 3) Poor knowledge about the sources and health effects of DF. Conclusions: The results clearly allowed identifying two factors and three clusters, and the variables that most influenced cluster membership were country, living environment and level of education.info:eu-repo/semantics/publishedVersio

Characterization of the LM5 pectic galactan epitope with synthetic analogues of β-1,4-d-galactotetraose

Plant cell wall glycans are important polymers that are crucial to plant development and serve as an important source of sustainable biomass. The study of polysaccharides in the plant cell wall relies heavily on monoclonal antibodies for localization and visualization of glycans, using e.g. Immunofluorescent microscopy. Here, we describe the detailed epitope mapping of the mab LM5 that is shown to bind to a minimum of three sugar residues at the non-reducing end of linear beta-1,4-linked galactan. The study uses de novo synthetic analogs of galactans combined with carbohydrate microarray and competitive inhibition ELISA for analysis of antibody-carbohydrate interactions

Different experimental approaches in modelling cataractogenesis: An overview of selenite-induced nuclear cataract in rats

Cataract, the opacification of eye lens, is the leading cause of blindness worldwide. At present, the only remedy is surgical removal of the cataractous lens and substitution with a lens made of synthetic polymers. However, besides significant costs of operation and possible complications, an artificial lens just does not have the overall optical qualities of a normal one. Hence it remains a significant public health problem, and biochemical solutions or pharmacological interventions that will maintain the transparency of the lens are highly required. Naturally, there is a persistent demand for suitable biological models. The ocular lens would appear to be an ideal organ for maintaining culture conditions because of lacking blood vessels and nerves. The lens in vivo obtains its nutrients and eliminates waste products via diffusion with the surrounding fluids. Lens opacification observed in vivo can be mimicked in vitro by addition of the cataractogenic agent sodium selenite (Na2SeO3) to the culture medium. Moreover, since an overdose of sodium selenite induces also cataract in young rats, it became an extremely rapid and convenient model of nuclear cataract in vivo. The main focus of this review will be on selenium (Se) and its salt sodium selenite, their toxicological characteristics and safety data in relevance of modelling cataractogenesis, either under in vivo or in vitro conditions. The studies revealing the mechanisms of lens opacification induced by selenite are highlighted, the representatives from screening for potential anti-cataract agents are listed