48,234 research outputs found

    Elemental composition of suspended particulates as functions of space and time in Cleveland, Ohio

    Get PDF
    An approach to the analysis of a very large elemental concentration data set. The particular data considered was generated by instrumental neutron activation and emission spectroscopy analyses of over 750 24-hour ambient air particulate samples collected at 16 sites in Cleveland, Ohio, during the 15 months from August 1971 thru October 1972. Examples are presented that show the use of multiple approaches to interpreting the data, including pairwise correlation statistics, selective data plotting and cluster analysis

    Use of Whatman-41 filters in air quality sampling networks (with applications to elemental analysis)

    Get PDF
    The operation of a 16-site parallel high volume air sampling network with glass fiber filters on one unit and Whatman-41 filters on the other is reported. The network data and data from several other experiments indicate that (1) Sampler-to-sampler and filter-to-filter variabilities are small; (2) hygroscopic affinity of Whatman-41 filters need not introduce errors; and (3) suspended particulate samples from glass fiber filters averaged slightly, but not statistically significantly, higher than from Whatman-41-filters. The results obtained demonstrate the practicability of Whatman-41 filters for air quality monitoring and elemental analysis

    Finding Gravitational Lenses With X-rays

    Get PDF
    There are 1\sim 1, 0.1 and 0.01 gravitationally lensed X-ray sources per square degree with soft X-ray fluxes exceeding 1015,101410^{-15}, 10^{-14} and 1013ergs/scm210^{-13} ergs/s cm^{-2} respectively. These sources will be detected serendipitously with the Chandra X-ray Observatory at a rate of 1--3 lenses per year of high resolution imaging. The low detection rate is due to the small area over which the HRC and ACIS cameras have the <1\farcs5 FWHM resolution necessary to find gravitational lenses produced by galaxies. Deep images of rich clusters at intermediate redshifts should yield one wide separation (\Delta\theta \gtorder 5\farcs0) multiply-imaged background X-ray source for every 10\sim 10, 30 and 300 clusters imaged to the same flux limits.Comment: 13 pages, including 5 figures, submitted to ApJ Letter

    Doing it differently: Engaging interview participants with imaginative variation

    Get PDF
    Imaginative variation was identified by Husserl (1936/1970) as a phenomenological technique for the purpose of elucidating the manner in which phenomena appear to consciousness. Briefly, by engaging in the phenomenological reduction and using imaginative variation, phenomenologists are able to describe the experience of consciousness, having stepped outside of the natural attitude through the epochē. Imaginative variation is a stage aimed at explicating the structures of experience, and is best described as a mental experiment. Features of the experience are imaginatively altered in order to view the phenomenon under investigation from varying perspectives. Husserl argued that this process will reveal the essences of an experience, as only those aspects that are invariant to the experience of the phenomenon will not be able to change through the variation. Often in qualitative research interviews, participants struggle to articulate or verbalise their experiences. The purpose of this article is to detail a radical and novel way of using imaginative variation with interview participants, by asking the participants to engage with imaginative variation, in order to produce a rich and insightful experiential account of a phenomenon. We will discuss how the first author successfully used imaginative variation in this way in her study of the erotic experience of bondage, discipline, dominance & submission, and sadism & masochism (BDSM), before considering the usefulness of this technique when applied to areas of study beyond sexuality

    Low-speed inducers for cryogenic upper-stage engines

    Get PDF
    Two-phase, low-speed hydrogen and oxygen inducers driven by electric motors and applicable to the tug engine were designed and constructed. The oxygen inducer was tested in liquid and two-phase oxygen. Its head and flow performance were approximately as designed, and it was able to accelerate to full speed in 3 seconds and produce its design flow and head. The analysis of the two-phase data indicated that the inducer was able to pump with vapor volume fractions in excess of 60 percent. The pump met all of its requirements (duration of runs and number of starts) to demonstrate its mechanical integrity

    The total assessment profile, volume 2

    Get PDF
    Appendices are presented which include discussions of interest formulas, factors in regionalization, parametric modeling of discounted benefit-sacrifice streams, engineering economic calculations, and product innovation. For Volume 1, see

    Elemental composition and size distribution of particulates in Cleveland, Ohio

    Get PDF
    Measurements were made of the elemental particle size distribution at five contrasting urban environments with different source-type distributions in Cleveland, Ohio. Air quality conditions ranged from normal to air pollution alert levels. A parallel network of high-volume cascade impactors (5-state) were used for simultaneous sampling on glass fiber surfaces for mass determinations and on Whatman-41 surfaces for elemental analysis by neutron activation for 25 elements. The elemental data are assessed in terms of distribution functions and interrelationships and are compared between locations as a function of resultant wind direction in an attempt to relate the findings to sources

    Age structure, dispersion and diet of a population of stoats (Mustela erminea) in southern Fiordland during the decline phase of the beechmast cycle

    Get PDF
    The dispersion, age structure and diet of stoats (Mustela erminea) in beech forest in the Borland and Grebe Valleys, Fiordland National Park, were examined during December and January 2000/01, 20 months after a heavy seed-fall in 1999. Thirty trap stations were set along a 38-km transect through almost continuous beech forest, at least 1 km apart. Mice were very scarce (nights, C/100TN) along two standard index lines placed at either end of the transect, compared with November 1999 (>60/100TN), but mice were detected (from footprints in stoat tunnels) along an 8 km central section of the transect (stations 14-22). Live trapping with one trap per station (total 317.5 trap nights) in December 2000 caught 2 female and 23 male stoats, of which 10 (including both females) were radio collared. The minimum range lengths of the two females along the transect represented by the trap line were 2.2 and 6.0 km; those of eight radio-tracked males averaged 2.9 ± 1.7 km. Stations 14-22 tended to be visited more often, by more marked individual stoats, than the other 21 stations. Fenn trapping at the same 30 sites, but with multiple traps per station (1333.5 trap nights), in late January 2001 collected carcasses of 35 males and 28 females (including 12 of the marked live-trapped ones). Another two marked males were recovered dead. The stoat population showed no sign of chronic nutritional stress (average fat reserve index = 2.8 on a scale of 1-4 where 4 = highest fat content); and only one of 63 guts analysed was empty. Nevertheless, all 76 stoats handled were adults with 1-3 cementum annuli in their teeth, showing that reproduction had failed that season. Prey categories recorded in descending frequency of occurrence were birds, carabid beetle (ground beetle), weta, possum, rat, and mouse. The frequencies of occurrence of mice and birds in the diet of these stoats (10% and 48%, respectively) were quite different from those in stoats collected in Pig Creek, a tributary of the Borland River (87%, 5%), 12 months previously when mice were still abundant. Five of the six stoat guts containing mice were collected within 1 km of stations 14-22

    The total assessment profile, volume 1

    Get PDF
    A methodology is described for the evaluation of societal impacts associated with the implementation of a new technology. Theoretical foundations for the methodology, called the total assessment profile, are established from both the economic and social science perspectives. The procedure provides for accountability of nonquantifiable factors and measures through the use of a comparative value matrix by assessing the impacts of the technology on the value system of the society
    corecore