31,568 research outputs found
Development of freeze-thaw processing technique for disaggregation of indurated mudrocks and enhanced recovery of calcareous microfossils
Microfossil extraction from indurated mudrocks is widely acknowledged as challenging, especially for foraminifera. Here we report development of the freeze–thaw extraction method through the addition of rapid heating, detergent and ultrasound stages. We use indurated mudrock samples from the Toarcian (Early Jurassic) of Yorkshire, UK to assess the effectiveness and develop the freeze–thaw method. We compare our results from freeze–thaw with those from standard foraminifera processing techniques, including the use of hydrogen peroxide. Processing by freeze–thaw increased the degree of mudrock disaggregation and resulted in no damage or dissolution of foraminifera. Following the freeze–thaw method with treatment in white spirit and sodium hexametaphosphate aided the separation of foraminifera from the disaggregated clays and was twice as efficient as pressure washing. Samples processed with hydrogen peroxide contained damaged microfossils and an under representation of delicate calcareous foraminifera. Many other studies of indurated mudrocks have used hydrogen peroxide to extract foraminifera, and this might have resulted in apparently barren intervals. The freeze–thaw method outlined here provides a low-cost, low-risk and successful method of disaggregating and extracting calcareous microfossils from indurated mudrocks. We anticipate our method may be relevant for other fossil groups and merits further development
Analytic Relations between Localizable Entanglement and String Correlations in Spin Systems
We study the relation between the recently defined localizable entanglement
and generalized correlations in quantum spin systems. Differently from the
current belief, the localizable entanglement is always given by the average of
a generalized string. Using symmetry arguments we show that in most spin 1/2
and spin 1 systems the localizable entanglement reduces to the spin-spin or
string correlations, respectively. We prove that a general class of spin 1
systems, which includes the Heisenberg model, can be used as perfect quantum
channel. These conclusions are obtained in analytic form and confirm some
results found previously on numerical grounds.Comment: 5 pages, RevTeX
Making the small oblique parameters large
We compute the oblique parameters, including the three new parameters ,
and introduced recently by the Montreal group, for the case of one
scalar multiplet of arbitrary weak isospin and weak hypercharge . We
show that, when the masses of the heaviest and lightest components of the
multiplet remain constant, but increases, the oblique parameter and
the three new oblique parameters increase like , while only
increases like . For large multiplets with masses not much higher than , the oblique parameters and may become much larger than
and .Comment: 9 pages, standard LATEX, 3 figures available from the authors, report
CMU-HEP93-17 and DOE-ER/40682-4
Evaluation of materials and design modifications for aircraft brakes
A test program is described which was carried out to evaluate several proposed design modifications and several high-temperature friction materials for use in aircraft disk brakes. The evaluation program was carried out on a specially built test apparatus utilizing a disk brake and wheel half from a small het aircraft. The apparatus enabled control of brake pressure, velocity, and braking time. Tests were run under both constant and variable velocity conditions and covered a kinetic energy range similar to that encountered in aircraft brake service. The results of the design evaluation program showed that some improvement in brake performance can be realized by making design changes in the components of the brake containing friction material. The materials evaluation showed that two friction materials show potential for use in aircraft disk brakes. One of the materials is a nickel-based sintered composite, while the other is a molybdenum-based material. Both materials show much lower wear rates than conventional copper-based materials and are better able to withstand the high temperatures encountered during braking. Additional materials improvement is necessary since both materials show a significant negative slope of the friction-velocity curve at low velocities
Development of the health and economic consequences of smoking interactive model
Objective-To describe the health and economic consequences of smoking model, a user friendly, web based tool, designed to estimate the health and economic outcomes associated with smoking and the benefits of smoking cessation. Results-An overview of the development of the model equations and user interface is given, and data from the UK are presented as an example of the model outputs. These results show that a typical smoking cessation strategy costs approximately pound 1200 per life year saved and pound 22 000 per death averted. Conclusions-The model successfully captures the complexity required to model smoking behaviour and associated mortality, morbidity, and health care costs. Furthermore, the interface provides the results in a simple and flexible way so as to be useful to a variety of audiences and to simulate a variety of smoking cessation methods
Restricted dog leucocyte antigen (DLA) class II haplotypes and genotypes in Beagles
AbstractBeagles are commonly used in vaccine trials as part of the regulatory approval process. Genetic restriction within this breed and the impact this might have on vaccine responses are rarely considered. This study was designed to characterise diversity of dog leucocyte antigen (DLA) class II genes in a breeding colony of laboratory Beagles, whose offspring are used in vaccine studies. DLA haplotypes were determined by PCR and sequence-based typing from genomic DNA extracted from blood. Breeding colony Beagles had significantly different DLA haplotype frequencies in comparison with pet Beagles and both groups showed limited DLA diversity. Restricted DLA class II genetic variability within Beagles might result in selective antigen presentation and vaccine responses that are not necessarily representative of those seen in other dog breeds
Multi-community command and control systems in law enforcement: An introductory planning guide
A set of planning guidelines for multi-community command and control systems in law enforcement is presented. Essential characteristics and applications of these systems are outlined. Requirements analysis, system concept design, implementation planning, and performance and cost modeling are described and demonstrated with numerous examples. Program management techniques and joint powers agreements for multicommunity programs are discussed in detail. A description of a typical multi-community computer-aided dispatch system is appended
Preliminary evaluation of a micro-based repeated measures testing system
A need exists for an automated performance test system to study the effects of various treatments which are of interest to the aerospace medical community, i.e., the effects of drugs and environmental stress. The ethics and pragmatics of such assessment demand that repeated measures in small groups of subjects be the customary research paradigm. Test stability, reliability-efficiency and factor structure take on extreme significance; in a program of study by the U.S. Navy, 80 percent of 150 tests failed to meet minimum metric requirements. The best is being programmed on a portable microprocessor and administered along with tests in their original formats in order to examine their metric properties in the computerized mode. Twenty subjects have been tested over four replications on a 6.0 minute computerized battery (six tests) and which compared with five paper and pencil marker tests. All tests achieved stability within the four test sessions, reliability-efficiencies were high (r greater than .707 for three minutes testing), and the computerized tests were largely comparable to the paper and pencil version from which they were derived. This computerized performance test system is portable, inexpensive and rugged
High-resolution width-modulated pulse rebalance electronics for strapdown gyroscopes and accelerometers
Three different rebalance electronic loops were designed, implemented, and evaluated. The loops were width-modulated binary types using a 614.4 kHz keying signal; they were developed to accommodate the following three inertial sensors with the indicated resolution values: (1) Kearfott 2412 accelerometer - resolution = 260 micro-g/data pulse, (2) Honeywell GG334 gyroscope - resolution = 3.9 milli-arc-sec/data pulse, (3) Kearfott 2401-009 accelerometer - resolution = 144 milli-g/data pulse. Design theory, details of the design implementation, and experimental results for each loop are presented
Optic nerve head segmentation
Reliable and efficient optic disk localization and segmentation are important tasks in automated retinal screening. General-purpose edge detection algorithms often fail to segment the optic disk due to fuzzy boundaries, inconsistent image contrast or missing edge features. This paper presents an algorithm for the localization and segmentation of the optic nerve head boundary in low-resolution images (about 20 /spl mu//pixel). Optic disk localization is achieved using specialized template matching, and segmentation by a deformable contour model. The latter uses a global elliptical model and a local deformable model with variable edge-strength dependent stiffness. The algorithm is evaluated against a randomly selected database of 100 images from a diabetic screening programme. Ten images were classified as unusable; the others were of variable quality. The localization algorithm succeeded on all bar one usable image; the contour estimation algorithm was qualitatively assessed by an ophthalmologist as having Excellent-Fair performance in 83% of cases, and performs well even on blurred image
- …