Impact of storage induced outgassing organic contamination on laser induced damage of silica optics at 351 nm

International audienceThe impact of storage conditions on laser induced damage density at 351 nm on bare fused polished silica samples has been studied. Intentionally outgassing of polypropylene pieces on silica samples was done. We evidenced an important increase of laser induced damage density on contaminated samples demonstrating that storage could limit optics lifetime performances. Atomic Force Microscopy (AFM) and Gas Chromatography-Mass Spectrometry (GC-MS) have been used to identify the potential causes of this effect. It shows that a small quantity of organic contamination deposited on silica surface is responsible for this degradation. Various hypotheses are proposed to explain the damage mechanism. The more likely hypothesis is a coupling between surface defects of optics and organic contaminants

Second-order nonlinear optical properties induced by thermal poling in photonic oxide glasses and transparent glass-ceramics

In recent years there has been a resurgence of interest in oxide glasses due to advances in lasers for information transport. Oxide glasses combine low cost of fabrication and good compatibility with silica glass fibers, which offer the opportunity for developing structures with nonlinear optical properties in integrated optical devices. The creation of an axial symmetry under thermal poling is currently necessary to induce Second-Order NonLinear (SONL) optical properties in glasses. A description of theoretical models which have been proposed for charge migration during thermal poling is presented. A review of SONL efficiencies which have been obtained for different glass compositions by this method is reported. Correlations between SONL properties and structural modifications under poling are also presented. Finally, we focus on the challenging fabrication of transparent glass-ceramic composites, especially when they are obtained by the precipitation of ferroelectric nanoparticle phases in the glassy matrix which adds the advantageous SONL properties of ferroelectric crystals

A short history of the 5-HT2C receptor: from the choroid plexus to depression, obesity and addiction treatment

This paper is a personal account on the discovery and characterization of the 5-HT2C receptor (first known as the 5- HT1C receptor) over 30 years ago and how it translated into a number of unsuspected features for a G protein-coupled receptor (GPCR) and a diversity of clinical applications. The 5-HT2C receptor is one of the most intriguing members of the GPCR superfamily. Initially referred to as 5-HT1CR, the 5-HT2CR was discovered while studying the pharmacological features and the distribution of [3H]mesulergine-labelled sites, primarily in the brain using radioligand binding and slice autoradiography. Mesulergine (SDZ CU-085), was, at the time, best defined as a ligand with serotonergic and dopaminergic properties. Autoradiographic studies showed remarkably strong [3H]mesulergine-labelling to the rat choroid plexus. [3H]mesulergine-labelled sites had pharmacological properties different from, at the time, known or purported 5-HT receptors. In spite of similarities with 5-HT2 binding, the new binding site was called 5-HT1C because of its very high affinity for 5-HT itself. Within the following 10 years, the 5-HT1CR (later named 5- HT2C) was extensively characterised pharmacologically, anatomically and functionally: it was one of the first 5-HT receptors to be sequenced and cloned. The 5-HT2CR is a GPCR, with a very complex gene structure. It constitutes a rarity in theGPCR family: many 5-HT2CR variants exist, especially in humans, due to RNA editing, in addition to a few 5-HT2CR splice variants. Intense research led to therapeutically active 5-HT2C receptor ligands, both antagonists (or inverse agonists) and agonists: keeping in mind that a number of antidepressants and antipsychotics are 5- HT2CR antagonists/inverse agonists. Agomelatine, a 5-HT2CR antagonist is registered for the treatment of major depression. The agonist Lorcaserin is registered for the treatment of aspects of obesity and has further potential in addiction, especially nicotine/ smoking. There is good evidence that the 5-HT2CR is involved in spinal cord injury-induced spasms of the lower limbs, which can be treated with 5-HT2CR antagonists/inverse agonists such as cyproheptadine or SB206553. The 5-HT2CR may play a role in schizophrenia and epilepsy. Vabicaserin, a 5-HT2CR agonist has been in development for the treatment of schizophrenia and obesity, but was stopped. As is common, there is potential for further indications for 5-HT2CR ligands, as suggested by a number of preclinical and/or genome-wide association studies (GWAS) on depression, suicide, sexual dysfunction, addictions and obesity. The 5-HT2CR is clearly affected by a number of established antidepressants/antipsychotics and may be one of the culprits in antipsychotic-induced weight gain

Correlations between structural properties of Nb2O5-NaPO3-Na2B4O7 glasses and non-linear optical activities

no abstrac

Surface Reactivity Control Of A Borosilicate Glass Using Thermal Poling

The ability to control glass surface reactivity at different length enables key properties required for future smart substrates . Employing a thermal poling process on a specific borosilicate glass composition can yield a surface with tailored physical and chemical properties. This work shows that during poling, alkali contained in the glass matrix migrates from the anode to the cathode side of the specimen, yielding the formation of an alkali-depleted layer under the anode. We have shown that this process is responsible for structural changes in the glass network and the formation of a frozen electric field within the glass. Network reorganization is linked to the creation of BØ3 units, which replace BØ4- entities upon migration of the alkali ions. The resulting newly charged borate structure leads to a measurable change in the glass\u27 affinity to atmospheric water, being attracted to the poled anodic zone. Such spatial control of surface hydrophilicity can aid in the creation of tailored surface functionality

Micro-Structuring The Surface Reactivity Of A Borosilicate Glass Via Thermal Poling

Thermal poling was proven successful to induce second order nonlinear properties and concurrent modification of composition, structure and chemical reactivity in glasses. With current efforts to reduce devices sizes in components employing such attributes, means to control changes at the micrometer scale are needed. We present a micro-imprinting poling process to locally tailor surface properties of a glass. Measurements using infrared, Raman and second harmonic generation microscopies confirm that changes in glass structure associated with an induced static electric field are responsible for the enhanced surface reactivity that is successfully controlled at the micrometer scale

Light-controlled erasure of induced chi((2)) in thermally poled glasses

no abstrac

Synthesis, structural and optical characterizations of tellurium oxide based glasses for optical devices : study of ionic mobility of alkaline metal under thermal poling

International audienc