71 research outputs found

    Peridynamic modeling of thermo-oxidative damage evolution in a composite lamina

    Get PDF
    Surface oxidation degrades the durability of polymer marix composites operating at high temperatures due to the presence of strong coupling between the thermal oxidation and structural damage evolution. The mechanism of oxidation in polymer matrix composites leads to shrinkage and damage growth. The thermo-oxidative behavior of composites introduces changes in diffusion behavior and mechanical response of the material. This study presents the derivation of peridynamic formulation for the thermo-oxidative behavior of the polymer matrix composites. As a demonstration purposes, isothermal aging of a unidirectional composite lamina is presented by using peridynamics. Oxidation contributed to the damage growth and its propagation

    Peridynamics for bending of beams and plates with transverse shear deformation

    Get PDF
    Progressive failure analysis of structures is still a major challenge. There exist various predictive techniques to tackle this challenge by using both classical (local) and nonlocal theories. Peridynamic (PD) theory (nonlocal) is very suitable for this challenge, but computationally costly with respect to the finite element method. When analyzing complex structures, it is necessary to utilize structural idealizations to make the computations feasible. Therefore, this study presents the PD equations of motions for structural idealizations as beams and plates while accounting for transverse shear deformation. Also, their PD dispersion relations are presented and compared with those of classical theory

    Calculation of stress intensity factor using displacement extrapolation method in peridynamic framework

    Get PDF
    This paper introduces a new approach to calculate stress intensity factors based on a combination of Displacement Extrapolation Method and Peridynamic Theory. After obtaining the displacement field from Peridynamic Theory, by appropriately selecting nodes at the crack tip region and their displacements yield stress intensity factors at the crack tips. To demonstrate the capability of the proposed approach, three different benchmark problems are considered including plate with a central crack, plate with an edge crack and plate with a slanted crack. Results evaluated from the current approach are compared against analytical and finite element analysis results, and good agreement is obtained between three different approaches. This shows that coupled Displacement Extrapolation Method and Peridynamic Theory approach can be an alternative method to calculate stress intensity factors

    A novel finite element technique for moisture diffusion modeling using ANSYS

    Get PDF
    This study presents a novel modeling approach for wetness and moisture concentration in the presence of time dependent saturated moisture concentration by employing the traditional ANSYS thermal and surface effect elements. The accuracy of the present approach is established by comparison with those of the existing ANSYS "diffusion" and "coupled field" elements as well as peridynamic theory. The comparison concerns the desorption process in a fully saturated bar made of two different materials with equal and unequal values of solubility activation energy in the presence of time dependent saturated moisture concentration under uniform and nonuniform temperature conditions. The results from the present approach agree well with those of peridynamics and ANSYS "coupled field" elements if the diffusivity is specified as time dependent. Significant deviation occurs if the diffusivity is specified as temperature dependent. The ANSYS "diffusion" element is applicable only for uniform temperature, and deviation becomes significant especially for unequal values of solubility activation energy

    Stress Analysis of Composite Cylindrical Shells with an Elliptical Cutout

    Get PDF
    A special-purpose, semi-analytical solution method for determining the stress and deformation fields in a thin laminated-composite cylindrical shell with an elliptical cutout is presented. The analysis includes the effects of cutout size, shape, and orientation; non-uniform wall thickness; oval-cross-section eccentricity; and loading conditions. The loading conditions include uniform tension, uniform torsion, and pure bending. The analysis approach is based on the principle of stationary potential energy and uses Lagrange multipliers to relax the kinematic admissibility requirements on the displacement representations through the use of idealized elastic edge restraints. Specifying appropriate stiffness values for the elastic extensional and rotational edge restraints (springs) allows the imposition of the kinematic boundary conditions in an indirect manner, which enables the use of a broader set of functions for representing the displacement fields. Selected results of parametric studies are presented for several geometric parameters that demonstrate that analysis approach is a powerful means for developing design criteria for laminated-composite shells

    Moisture diffusion modelling by using peridynamics

    Get PDF
    The moisture concentration in electronic packages can be determined based on the ā€œwetnessā€ approach. The wetness parameter representing the ratio of the moisture concentration with respect to the saturated concentration value of the material is continuous along dissimilar material interfaces. If the saturated concentration value is not dependent on temperature or time, the wetness equation is analogous to the standard diffusion equation whose solution can be constructed by using any commercial finite element analysis software. However, the time dependency of saturated concentration requires special treatment under temperature dependent environmental conditions such as reflow process. The saturated concentration values of most polymer materials in electronic packages are mostly dependent on temperature. As a result, the wetness equation is not directly analogous to the standard diffusion equation. This study presents peridynamic solution of the wetness equation with time dependent saturated concentration. The approach is computationally efficient as well as easy to implement without any iterations in each time step. The implementation is achieved by using the traditional elements and solvers available in a commercial finite element software

    Stress Analysis of Composite Cylindrical Shells With an Elliptical Cutout

    Get PDF
    A special-purpose, semi-analytical solution method for determining the stress and deformation fields in a thin laminated-composite cylindrical shell with an elliptical cutout is presented. The analysis includes the effects of cutout size, shape, and orientation; nonuniform wall thickness; oval-cross-section eccentricity; and loading conditions. The loading conditions include uniform tension, uniform torsion, and pure bending. The analysis approach is based on the principle of stationary potential energy and uses Lagrange multipliers to relax the kinematic admissibility requirements on the displacement representations through the use of idealized elastic edge restraints. Specifying appropriate stiffness values for the elastic extensional and rotational edge restraints (springs) allows the imposition of the kinematic boundary conditions in an indirect manner, which enables the use of a broader set of functions for representing the displacement fields. Selected results of parametric studies are presented for several geometric parameters that demonstrate that analysis approach is a powerful means for developing design criteria for laminated-composite shells

    A lightweight approach for airborne wind turbine drivetrains

    Get PDF
    Buoyant airborne wind turbines are devices capable of harnessing stronger winds at higher altitudes and with their automated and rapidly deployable system they are suited to niche applications such as emergency power generation. Although much of the wind turbine technology for these systems is common with their ā€˜groundedā€™ cousins, an additional design limitation is the requirement for the wind turbine equipment to be lightweight. This paper concentrates on the drivetrain of the wind turbine and the different potential ways of reducing its mass. A buoyant airborne wind turbine with different types of drivetrains, going from gearless to geared systems with distinct gear ratios, has been analysed. Special attention was paid to the mass of the supporting structure of the permanent magnet electrical generator and this was minimized by utilising low density materials, such as composites, in its design. The model showed that a significant reduction in the mass of the drivetrain can be achieved in the gearless case by using materials with a higher ratio of Youngā€™s Modulus to density for the electrical machine supporting structure. For the geared systems, mass decrease was less significant as the gearbox mass had also to be considered. Keywords: Airborne, lightweight, generator structure, composite material

    Crack growth modeling and simulation of a peridynamic fatigue model based on numerical and analytical solution approaches

    Get PDF
    Fatigue crack growth assessment of 2024-T3 aluminum alloy is carried out on the basis of a recently developed peridynamic fatigue model. The governing remaining-life equation of the peridynamic fatigue model has been solved by two different approaches i.e. numerical and analytical approaches to perform fatigue-crack growth simulations for 2024-T3 aluminum specimen with a pre-existing crack. Remaining-life parameters of the numerical and analytical solution approaches are determined by calibrating with the experimental crack growth data. Fatigue crack growth predictions, and associated material deformation of the specimen under various loading conditions are simulated by the two approaches. Predicted results show that the numerical approach has shortcomings in accurate predictions of crack growth rates for the application of different loading conditions, while the analytical approach can be applied for a wide range of loading conditions with good prediction accuracy and stable simulations of the material deformation with a growing crack. Furthermore, it is found that the computational time of the analytical approach is considerably shorter in comparison with the numerical approach

    Peridynamic modeling of composite laminates under explosive loading

    Get PDF
    Peer reviewedPostprin
    • ā€¦
    corecore