Etude sur modèle de la désinfection de l'eau par rayonnements ultraviolets

Le présent article rapporte les résultats d'une investigation des facteurs géométriques applicables à des réacteurs annulaires à mélange axial complet et appliqués à la désinfection des eaux au moyen de lumière UV de 254 nm. La loi de Bunsen-Roscoe est suivie en prenant en compte la dose corrigée par un facteur géométrique m; dose=mIot. Le bactériophage f2 ne montre pas de phase de latence de mortalité et constitue dès lors un modèle valable. La dose létale à 99 % mesurée est de 470 ± 30 J/m2.The f2-bacteriophage is chosen as a test organism to evaluate the geometrical factors which intervene in the disinfection of water by UV-light. This phage is an ARN and single strain cell which has the characteristic of being killed without a lethal lag phase being observed. It is also shown as a representative organism for the estimation of the virucidal action of UV-light.In this work a cold cathode mercury lamp emitting the 254 nm photon at low intensity, th.e. 14.9 W/m2 at the lamp surface, is used. The Lamp has the advantage that its photochemical yield does not depend on the temperature of the water investigated.The geometrical factor of different annular reactors is investigated by submersing the lamp in water contained in vessels of different diameters. The introduction of an artificial competitor, that is para-hydroxybenzoïc acid, which absorbs part of the 254 nm-photons also allows the impact of the reactor geometry to be evaluated. All the experiments are carried out in batch-type conditions and the water is completely mixed during the experiments. These conditions applied in laboratory investigations are representative of those existing in plug-flow reactors with complete axial mixing of discrete portions of the liquid contained in the annular space between the lamp and the reactor.In this work all data conform to the Bunsen-Roscoe Law relating the kinetics of first order decay to the irradiation dose : (I.t). No residual resisting organisms or "protected" organisms which could subsist at the end of exhaustive irradiation were observed.The practical dose, that is the dose at any point of the reactors taking into account the absorption of the light and the increasing surface irradiated at increasing reactor diameter and also the finite dimension of the lamp diameter is accounted for by a single correction factor m : Dose (D) = m.Io.t, in which, also according to the literature :       2 r o (1 - exp [- E (r- - ro) ] )m = ______________________________            E (r-2 - r2o)where ro and r- are respectively the lamp radius and the reactor radius. E is the extinction coefficient (base e).The data as a whole converge to a 99 % lethal dose of 470 ± 30 J/m2 in clear water, either absorbing or not at 254 nm.In the presence of turbidity, obtained by the introduction of 10 mgL-1 koalin the efficiency is enhanced by 15 to 20 X, that is the apparent 99 % lethal dose is of 400 ± 30 J/m2. By correcting the light intensity transmitted by reflection, this dose is about 420 J/m2.Turbidity in UV-disinfection is thus not necessarily a negative factor in disinfection of liquids with UV-light.This investigation as a whole establishes an "economical space" between lamp surface and reactor wall of about 4 cm at which the energy consumption for a given level of disinfection attains a sufficiently tow value

Action research and democracy

This contribution explores the relationship between research and learning democracy. Action research is seen as being compatible with the orientation of educational and social work research towards social justice and democracy. Nevertheless, the history of action research is characterized by a tension between democracy and social engineering. In the social-engineering approach, action research is conceptualized as a process of innovation aimed at a specific Bildungsideal. In a democratic approach action research is seen as research based on cooperation between research and practice. However, the notion of democratic action research as opposed to social engineering action research needs to be theorized. So called democratic action research involving the implementation by the researcher of democracy as a model and as a preset goal, reduces cooperation and participation into instruments to reach this goal, and becomes a type of social engineering in itself. We argue that the relationship between action research and democracy is in the acknowledgment of the political dimension of participation: ‘a democratic relationship in which both sides exercise power and shared control over decision-making as well as interpretation’. This implies an open research design and methodology able to understand democracy as a learning process and an ongoing experiment

Uncanny Objects and the Fear of the Familiar:Hiding from Akan Witches in New York City

This article examines the cosmology and secret practices of West African traditional priests in New York City in preventing the spread of witchcraft, an evil invisible spirit transmitted between female members of the Akan matrilineage. Explored is an uncanny dynamic as everyday habitus becomes increasingly strange in the world of a young Ghanaian woman in the Bronx, who has become petrified of insinuations of witchcraft from close family members. In trying to hide the young woman from infection by her fellow witches, Akan priests attempt to ‘capture’ her habits and everyday routines, calling upon the iconic magic of New York City in order to ‘misplace’ familiarity within the anonymity of Manhattan. In this process, the transmission of the witch’s spirit to the intended victim is disturbed as the victim’s life and things are moved. Nowhere to be found, the witch shifts her attention to other victims

Continuous immobilized yeast reactor system for complete beer fermentation using spent grains and corncobs as carrier materials

Despite extensive research carried out in the last few decades, continuous beer fermentation has not yet managed to outperform the traditional batch technology. An industrial breakthrough in favour of continuous brewing using immobilized yeast could be expected only on achievement of the following process characteristics: simple design, low investment costs, flexible operation, effective process control and good product quality. The application of cheap carrier materials of by-product origin could significantly lower the investment costs of continuous fermentation systems. This work deals with a complete continuous beer fermentation system consisting of a main fermentation reactor (gas-lift) and a maturation reactor (packedbed) containing yeast immobilized on spent grains and corncobs, respectively. The suitability of cheap carrier materials for long-term continuous brewing was proved. It was found that by fine tuning of process parameters (residence time, aeration) it was possible to adjust the flavour profile of the final product. Consumers considered the continuously fermented beer to be of a regular quality. Analytical and sensorial profiles of both continuously and batch fermented beers were compared.(Fundação de Amparo a Pesquisa do Estado de São Paulo, Brazil (FAPESPFundação para a Ciência e a Tecnologia (FC

Physical characteristics of the back are not predictive of low back pain in healthy workers: A prospective study

Background. In the working population, back disorders are an important reason for sick leave and permanent work inability. In the context of fitting the job to the worker, one of the primary tasks of the occupational health physician is to evaluate the balance between work-related and individual variables. Since this evaluation of work capacity often consists of a physical examination of the back, the objective of this study was to investigate whether a physical examination of the low back, which is routinely performed in occupational medicine, predicts the development of low back pain (LBP). Methods. This study is part of the Belgian Low Back Cohort (BelCoBack) Study, a prospective study to identify risk factors for the development of low back disorders in occupational settings. The study population for this paper were 692 young healthcare or distribution workers (mean age of 26 years) with no or limited back antecedents in the year before inclusion. At baseline, these workers underwent a standardised physical examination of the low back. One year later, they completed a questionnaire on the occurrence of LBP and some of its characteristics. To study the respective role of predictors at baseline on the occurrence of LBP, we opted for Cox regression with a constant risk period. Analyses were performed separately for workers without any back antecedents in the year before inclusion ('asymptomatic' workers) and for workers with limited back antecedents in the year before inclusion ('mildly symptomatic' workers). Results. In the group of 'asymptomatic' workers, obese workers showed a more than twofold-increased risk on the development of LBP as compared to non-obese colleagues (RR 2.57, 95%CI: 1.09 - 6.09). In the group of 'mildly symptomatic' workers, the self-reports of pain before the examination turned out to be most predictive (RR 3.89, 95%CI: 1.20 - 12.64). Conclusion. This study showed that, in a population of young workers wh no or limited antecedents of LBP at baseline, physical examinations, as routinely assessed in occupational medicine, are not useful to predict workers at risk for the development of back disorders one year later

The Clacton Spear: the last one hundred years

In 1911 an eminent amateur prehistorian pulled the broken end of a pointed wooden shaft from Palaeolithic-age sediments at a seaside town in Essex. This artefact, still the earliest worked wood to be discovered in the world, became known as the Clacton Spear. Over the past 100 years it has variously been interpreted as a projectile weapon, a stave, a digging stick, a snow probe, a lance, a game stake and a prod to ward off rival scavengers. These perspectives have followed academic fashions, as the popular views of early hominins have altered. Since discovery the Clacton spear has also been replicated twice, has undergone physical transformations due to preservation treatments, and has featured in two public exhibitions. Within this article the changing context of the spear, its parallels, and all previous conservation treatments and their impacts are assessed.© 2015 Royal Archaeological Institute. This is an Accepted Manuscript of an article published by Taylor & Francis in The Archaeological Journal on 3rd March 2015, available online: http://www.tandfonline.com/doi.org/10.1080/00665983.2015.1008839.The attached document is the author(’s’) final accepted/submitted version of the journal article. You are advised to consult the publisher’s version if you wish to cite from it

Applications of yeast flocculation in biotechnological processes

A review on the main aspects associated with yeast flocculation and its application in biotechnological processes is presented. This subject is addressed following three main aspects – the basics of yeast flocculation, the development of “new” flocculating yeast strains and bioreactor development. In what concerns the basics of yeast flocculation, the state of the art on the most relevant aspects of mechanism, physiology and genetics of yeast flocculation is reported. The construction of flocculating yeast strains includes not only the recombinant constitutive flocculent brewer’s yeast, but also recombinant flocculent yeast for lactose metabolisation and ethanol production. Furthermore, recent work on the heterologous β-galactosidase production using a recombinant flocculent Saccharomyces cerevisiae is considered. As bioreactors using flocculating yeast cells have particular properties, mainly associated with a high solid phase hold-up, a section dedicated to its operation is presented. Aspects such as bioreactor productivity and culture stability as well as bioreactor hydrodynamics and mass transfer properties of flocculating cell cultures are considered. Finally, the paper concludes describing some of the applications of high cell density flocculation bioreactors and discussing potential new uses of these systems.Fundação para a Ciência e a Tecnologia (FCT) – PRAXIS XXI - BD11306/97

‘‘Beet-ing’’ the Mountain: A Review of the Physiological and Performance Effects of Dietary Nitrate Supplementation at Simulated and Terrestrial Altitude

Exposure to altitude results in multiple physiological consequences. These include, but are not limited to, a reduced maximal oxygen consumption, drop in arterial oxygen saturation, and increase in muscle metabolic perturbations at a fixed sub-maximal work rate. Exercise capacity during fixed work rate or incremental exercise and time-trial performance are also impaired at altitude relative to sea-level. Recently, dietary nitrate (NO3-) supplementation has attracted considerable interest as a nutritional aid during altitude exposure. In this review, we summarise and critically evaluate the physiological and performance effects of dietary NO3- supplementation during exposure to simulated and terrestrial altitude. Previous investigations at simulated altitude indicate that NO3- supplementation may reduce the oxygen cost of exercise, elevate arterial and tissue oxygen saturation, improve muscle metabolic function, and enhance exercise capacity/ performance. Conversely, current evidence suggests that NO3- supplementation does not augment the training response at simulated altitude. Few studies have evaluated the effects of NO3- at terrestrial altitude. Current evidence indicates potential improvements in endothelial function at terrestrial altitude following NO3- supplementation. No effects of NO3- supplementation have been observed on oxygen consumption or arterial oxygen saturation at terrestrial altitude, although further research is warranted. Limitations of the present body of literature are discussed, and directions for future research are provided