Size and polydispersity effect on the magnetization of densely packed magnetic nanoparticles

The magnetic properties of densely packed magnetic nanoparticles (MNP) assemblies are investigated from Monte Carlo simulations. The case of iron oxide nanoparticles is considered as a typical example of MNP. The main focus is put on particle size and size polydispersity influences on the magnetization curve. The particles are modeled as uniformly magnetized spheres isolated one from each other by a non magnetic layer representing the organic coating. A comparison with recent experimental results on $\gamma-$Fe$_2$O$_3$ powder samples differing by their size is given.Comment: To be published in the Journal of Applied Physics, to be found at http://jap.aip.org

First-principles calculation of magnetoelastic coefficients and magnetostriction in the spinel ferrites CoFe2O4 and NiFe2O4

We present calculations of magnetostriction constants for the spinel ferrites CoFe2O4 and NiFe2O4 using density functional theory within the GGA+U approach. Special emphasis is devoted to the influence of different possible cation distributions on the B site sublattice of the inverse spinel structure on the calculated elastic and magnetoelastic constants. We show that the resulting symmetry-lowering has only a negligible effect on the elastic constants of both systems as well as on the magnetoelastic response of NiFe2O4, whereas the magnetoelastic response of CoFe2O4 depends more strongly on the specific cation arrangement. In all cases our calculated magnetostriction constants are in good agreement with available experimental data. Our work thus paves the way for more detailed first-principles studies regarding the effect of stoichiometry and cation inversion on the magnetostrictive properties of spinel ferrites.Comment: 11 pages, 6 figure

Magnetic Reversal Time in Open Long Range Systems

Topological phase space disconnection has been recently found to be a general phenomenon in isolated anisotropic spin systems. It sets a general framework to understand the emergence of ferromagnetism in finite magnetic systems starting from microscopic models without phenomenological on-site barriers. Here we study its relevance for finite systems with long range interacting potential in contact with a thermal bath. We show that, even in this case, the induced magnetic reversal time is exponentially large in the number of spins, thus determining {\it stable} (to any experimental observation time) ferromagnetic behavior. Moreover, the explicit temperature dependence of the magnetic reversal time obtained from the microcanonical results, is found to be in good agreement with numerical simulations. Also, a simple and suggestive expression, indicating the Topological Energy Threshold at which the disconnection occurs, as a real energy barrier for many body systems, is obtained analytically for low temperature

Magnetoelectric coupling in polycrystalline FeVO4

We report coupling between magnetic and electric orders for antiferromagnetic polycrystalline FeVO4 in which magnetism-induced polarization has been recently found in noncollinear antiferromagnetic state below the second antiferromagnetic phase transition at TN2=15.7K. In this low symmetry phase space group P-1, the magnetic field dependence of electric polarization evidences a clear magnetoelectric coupling in the noncollinear spin-configured antiferromagnetic phase. The discontinuity of magnetodielectric effect observed at the vicinity of the polar to nonpolar transition evidences competition between different magnetodielectric couplings in the two different antiferromagnetic states. The existence of thermal expansion anomaly near TN2 and magnetostriction effect support magnetoelastically mediated scenario of the observed magnetoelectric effect.Comment: 4 pages, 6 figures, Phys. Rev. B 80, 172103 (2009

Theory of magnetic domains in uniaxial thin films

For uniaxial easy axis films, properties of magnetic domains are usually described within the Kittel model, which assumes that domain walls are much thinner than the domains. In this work we present a simple model that includes a proper description of the magnetostatic energy of domains and domain walls and also takes into account the interaction between both surfaces of the film. Our model describes the behavior of domain and wall widths as a function of film thickness, and is especially well suited for the strong stripe phase. We prove the existence of a critical value of magneto-crystalline anisotropy above which stripe domains exist for any film thickness and justify our model by comparison with exact results. The model is in good agreement with experimental data for hcp cobalt.Comment: 15 pages, 7 figure

Magnetization of densely packed interacting magnetic nanoparticles with cubic and uniaxial anisotropies: A Monte Carlo study

International audienceThe magnetization curves of densely packed single domain magnetic nanoparticles (MNP) are investigated by Monte Carlo simulations in the framework of an effective one spin model. The particles whose size polydispersity is taken into account are arranged in spherical clusters and both dipole dipole interactions (DDI) and magnetic anisotropy energy (MAE) are included in the total energy. Having in mind the special case of spinel ferrites of intrinsic cubic symmetry, combined cubic and uniaxial magnetocrystalline anisotropies are considered with different configurations for the orientations of the cubic and uniaxial axes. It is found that the DDI, together with a marked reduction of the linear susceptibility are responsible for a damping of the peculiarities due to the MAE cubic component on the magnetization. As an application, we show that the simulated magnetization curves compare well to experimental results for $\gamma$--Fe$_2$O$_3$ MNP for small to moderate values of the field

Giant Magnetoelastic Effects in BaTiO3-based Extrinsic Multiferroic Hybrids

Extrinsic multiferroic hybrid structures consisting of ferromagnetic and ferroelectric layers elastically coupled to each other are promising due to their robust magnetoelectric effects even at room temperature. For a quantitative analysis of these magnetoelectric effects, a detailed knowledge of the piezoelectric and magnetoelastic behavior of both constituents as well as their mutual elastic coupling is mandatory. We here report on a theoretical and experimental study of the magnetic behavior of BaTiO3-based extrinsic multiferroic structures. An excellent agreement between molecular dynamics simulations and the experiments was found for Fe50Co50/BaTiO3 and Ni/BaTiO3 hybrid structures. This demonstrates that the magnetic behavior of extrinsic multiferroic hybrid structures can be determined by means of ab-initio calculations, allowing for the design of novel multiferroic hybrids

Three terminal capacitance technique for magnetostriction and thermal expansion measurements

An instrument has been constructed to measure a large range of magnetostriction and thermal expansion between room temperature and 4 K in a superconductive split-coil magnet, that allows investigation in magnetic fields up to 12 T. The very small bulk samples (up to 1 mm in size) as well as big ones (up to 13 mm) of the irregular form can be measured. The possibility of magnetostriction investigation in thin films is shown. A general account is given of both electrical and the mechanical aspects of the design of capacitance cell and their associated electronic circuitry. A simple lever device is proposed to increase the sensitivity twice. The resulting obtained sensitivity can be 0.5 Angstrom. The performance of the technique is illustrated by some preliminary measurements of the magnetostriction of superconducting MgB2, thermal expansion of (La0.8Ba0.2)0.93MnO3 single crystal and magnetoelastic behavior of the Ni/Si(111) and La0.7Sr0.3CoO3/SAT0.7CAT0.1LA0.2(001) cantilevers.Comment: 6 pages, 6 figures, journal pape

Magnetoelastic effects in Jahn-Teller distorted CrF2_2 and CuF2_2 studied by neutron powder diffraction

We have studied the temperature dependence of crystal and magnetic structures of the Jahn-Teller distorted transition metal difluorides CrF$_2$ and CuF$_2$ by neutron powder diffraction in the temperature range 2-280 K. The lattice parameters and the unit cell volume show magnetoelastic effects below the N\'eel temperature. The lattice strain due to the magnetostriction effect couples with the square of the order parameter of the antiferromagnetic phase transition. We also investigated the temperature dependence of the Jahn-Teller distortion which does not show any significant effect at the antiferromagnetic phase transition but increases linearly with increasing temperature for CrF$_2$ and remains almost independent of temperature in CuF$_2$. The magnitude of magnetovolume effect seems to increase with the low temperature saturated magnetic moment of the transition metal ions but the correlation is not at all perfect

Tetragonal magnetostriction and magnetoelastic coupling in Fe-Al, Fe-Ga, Fe-Ge, Fe-Si, Fe-Ga-Al, and Fe-Ga-Ge alloys

This paper presents a comparative study on the tetragonal magnetostriction constant,λγ,2, [ = (3/2)λ100] and magnetoelastic coupling, b1, of binary Fe100-xZx (0 \u3c x \u3c 35, Z = Al, Ga, Ge, and Si) and ternary Fe-Ga-Al and Fe-Ga-Ge alloys. The quantities are corrected for magnetostrains due to sample geometry (the magnetostrictive form effect). Recently published elastic constant data along with magnetization measurements at both room temperature and 77 K make these corrections possible. The form effect correction lowers the magnetostriction by ∼10 ppm for high-modulus alloys and by as much as 30 ppm for low-modulus alloys. The elastic constants are also used to determine the values of the magnetoelastic coupling constant, b1. With the new magnetostriction data on the Fe-Al-Ga alloy, it is possible to show how the double peak magnetostriction feature of the binary Fe-Ga alloy flows into the single peak binary Fe-Al alloy. The corrected magnetostriction and magnetoelastic coupling data for the various alloys are also compared using the electron-per-atom ratio, e/a, as the common variable. The Hume-Rothery rules link thee/a ratio to the regions of phase stability, which appear to be intimately related to the magnetostriction versus the solute concentration curve in these alloys. Using e/a as the abscissa tends to align the peaks in the magnetostriction and magnetoelastic coupling for the Fe-Ga, Fe-Ge, Fe-Al, Fe-Ga-Al, and Fe-Ga-Ge alloys, but not for the Fe-Si alloys for which the larger atomic size difference may play a greater role in phase stabilization. Corrections for the form effect are also presented for the rhombohedral magnetostriction,λɛ,2, and the magnetoelastic coupling, b2, of Fe100-xGax (0 \u3c x \u3c 35) alloys