Dataset concerning the analytical approximation of the Ae3 temperature.

In this paper we present a new polynomial function for calculating the local phase transformation temperature (Ae3 ) between the austenite+ferrite and the fully austenitic phase fields during heating and cooling of steel:[Formula: see text] The dataset includes the terms of the function and the values for the polynomial coefficients for major alloying elements in steel. A short description of the approximation method used to derive and validate the coefficients has also been included. For discussion and application of this model, please refer to the full length article entitled "The role of aluminium in chemical and phase segregation in a TRIP-assisted dual phase steel" 10.1016/j.actamat.2016.05.046 (Ennis et al., 2016) [1]

Position-dependent shear-induced austenite-martensite transformation in double-notched TRIP and dual-phase steel samples

While earlier studies on transformation-induced-plasticity (TRIP) steels focused on the determination of the austenite-to-martensite decomposition in uniform deformation or thermal fields, the current research focuses on the determination of the local retained austenite-to-martensite transformation behaviour in an inhomogeneous yet carefully controlled shear-loaded region of double-notched TRIP and dual-phase (DP) steel samples. A detailed powder analysis has been performed to simultaneously monitor the evolution of the phase fraction and the changes in average carbon concentration of metastable austenite together with the local strain components in the constituent phases as a function of the macroscopic stress and location with respect to the shear band. The metastable retained austenite shows a mechanically induced martensitic transformation in the localized shear zone, which is accompanied by an increase in average carbon concentration of the remaining austenite due to a preferred transformation of the austenite grains with the lowest carbon concentration. At the later deformation stages the geometry of the shear test samples results in the development of an additional tensile component. The experimental strain field within the probed sample area is in good agreement with finite element calculations. The strain development observed in the low-alloyed TRIP steel with metastable austenite is compared with that of steels with the same chemical composition containing either no austenite (a DP grade) or stable retained austenite (a TRIP grade produced at a long bainitic holding time). The transformation of metastable austenite under shear is a complex interplay between the local microstructure and the evolving strain fields

Magnetocrystalline effects on the subsurface hydrogen diffusion in γ-Fe(001)

The effect of magnetism on hydrogen adsorption and subsurface diffusion through face-centred cubic (fcc) γ-Fe(001) was investigated using spin-polarised density functional theory (s-DFT). The non-magnetic (NM), ferromagnetic (FM), and antiferromagnetic single (AFM1) and double layer (AFMD) structures were considered. For each magnetic state, the hydrogen preferentially adsorbs at the fourfold site, with adsorption energies of 4.07, 4.12, 4.03 and 4.05 eV/H atom for the NM, FM, AFM1 and AFMD structures. A total barrier of 1.34, 0.90, 1.32 and 1.25 eV and a bulk-like diffusion barrier of 0.6, 0.2, 0.4 and 0.3 eV were calculated for the NM, FM, AFM1 and AFMD magnetic states. The Fe atoms nearest to the H atom exhibited a reduced magnetic moment, whereas the next-nearest neighbour Fe atoms exhibited a non-negligible local perturbation in the magnetic moment. The presence of magnetically ordered structures has a minimal influence on the minimum energy path for H diffusion through the lattice and on the adsorption of H atoms on the Fe(001) surface, but we computed a significant reduction of the bulk-like diffusion barriers with respect to the non-magnetic state of fcc γ-Fe

Atomically resolved chemical ordering at the nm-thick TiO precipitate/matrix interface in V-4Ti-4Cr alloy

We have used advanced analytical electron microscopy to characterise the local structure and chemistry at the interface between nm-thick TiO precipitates and the V-based matrix in a V-4Ti-4Cr alloy. Our results reveal the presence of an intergrowth between the fcc TiO and bcc vanadium structures, with a repeat lattice distance that equals 2.5 times the vanadium lattice parameter along the c-axis. Our atomic resolution analysis of the interface will impact the mechanistic understanding of its interaction with interstitials and radiation-induced lattice defects, and consequently trigger the development of improved alloy structures with interfaces engineered for enhanced radiation tolerance

Elucidating the Thermal Response of W-Ta Alloys with Transient Grating Spectroscopy, TEM and Atomistic Simulation

Critical for tungsten alloys’ use as plasma-facing component materials are their thermal response and their evolution under irradiation. Utilising Transient Grating Spectroscopy, TEM, and Molecular Dynamics, this study sought to probe these changes in W, W6Ta, and W11Ta alloys. Irradiation with 12.25 MeV W6+ ions was carried out in the CLASS facility at MIT at a temperature of 500°C for doses of 0.1, 0.3, and 1.0 dpa. The alloys’ thermal diffusivity was found to degrade less than that of the pure counterpart. Molecular Dynamics simulation revealed that this was due to a reduced defect population below TEM resolution. Despite these alloys showing enhanced resilience to thermal property degradation, it was found that the absolute values of their thermal diffusivity remained below that of pure tungsten. This study highlighted a key interplay between enhancing radiation tolerance with alloying additions and the alloy additions’ initial negative effect on the thermal response and thus in-service behaviour

Martensitic transformation of individual grains in low-alloyed TRIP steels

We have performed in situ synchrotron X-ray diffraction experiments on low-alloyed multiphase TRIP steels during cooling, to monitor the martensitic transformation of individual austenite grains within the bulk material. Direct experimental evidence is presented that the stability of the austenite grains is controlled not only by the local carbon level but also by the grain size. This new quantitative information on the martensitic transformation in complex microstructures is of great importance for the design of martensite-based metallic materials.</p

Metastable austenite driven work-hardening behaviour in a TRIP-assisted dual phase steel

The mechanically-induced transformation behaviour of the metastable austenite phase in a high-strength industrial TRIP-assisted Dual Phase steel was monitored in situ using high-energy synchrotron diffraction under uniaxial loading. This allowed direct quantification of the impact of the transformation of the metastable austenite phase (16 vol %), embedded in a ferrite-bainite-martensite matrix, on the work hardening behaviour of this steel. Our results show that the mechanically induced transformation of austenite does not begin until the onset of matrix yielding. We provide experimental evidence which demonstrates for the first time that the austenite transformation increases the work-hardening contribution, σw thereby supporting a driving force approach to transformation induced plasticity. The transformation work required leads to an increase in the macroscopic work-hardening rate after matrix yielding and continues to offset the decrease in the work-hardening rate in the ferrite and martensite phases up to the UTS. Further we show conclusively that martensite yielding does not occur until the completion of the mechanically induced transformation of austenite. Plastic deformation of martensite is immediately followed by local plastic instability leading to necking and ultimate failure of this material

Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels

In situ three-dimensional (3-D) X-ray diffraction experiments have been performed at a synchrotron source on low-alloyed multiphase TRIP steels containing 0.25 wt.% Si and 0.44 wt.% Al and produced with different bainitic holding times, in order to assess the influence of the bainitic transformation on the thermal stability of individual austenite grains with respect to their martensitic transformation. A detailed characterization of the austenite grain volume distribution at room temperature was performed as a function of the prior bainitic holding time. In addition, the martensitic transformation behaviour of individual metastable grains was studied in situ during cooling to a temperature of 100 K. Both the carbon content and the grain volume play a key role in the stability of the austenite grains below 15 μm3, while the carbon content exerts the dominant effect in the stability of the bigger grains. Measurements also suggest that the tetragonality of the thermally formed martensite is suppressed.</p

Eleven-month longitudinal study of antibodies in SARS-CoV-2 exposed and naïve primary health care workers upon COVID-19 vaccination

We evaluated the kinetics of antibody responses to Two years into the COVID-19 pandemic and 1 year after the start of vaccination rollout, the world faced a peak of cases associated with the highly contagious Omicron variant of concern (VoC) of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike (S) and nucleocapsid (N) antigens over five cross-sectional visits (January-November 2021), and the determinants of pre-booster immunoglobulin levels, in a prospective cohort of vaccinated primary health care workers in Catalonia, Spain. Antibodies against S antigens after a full primary vaccination course, mostly with BNT162b2, decreased steadily over time and were higher in pre-exposed (n = 247) than naive (n = 200) individuals, but seropositivity was maintained at 100% (100% IgG, 95.5% IgA, 30.6% IgM) up to 319 days after the first dose. Antibody binding to variants of concern was highly maintained for IgG compared to wild type but significantly reduced for IgA and IgM, particularly for Beta and Gamma. Factors significantly associated with longer-term antibodies included age, sex, occupation, smoking, adverse reaction to vaccination, levels of pre-vaccination SARS-CoV-2 antibodies, interval between disease onset and vaccination, hospitalization, oxygen supply, post COVID and symptomatology. Earlier morning vaccination hours were associated with higher IgG responses in pre-exposed participants. Symptomatic breakthroughs occurred in 9/447 (2.01%) individuals, all among naive (9/200, 4.5%) and generally boosted antibody responses. Additionally, an increase in IgA and/or IgM seropositivity to variants, and N seroconversion at later time points (6.54%), indicated asymptomatic breakthrough infections, even among pre-exposed. Seropositivity remained highly stable over almost a year after vaccination. However, gradually waning of anti-S IgGs that correlate with neutralizing activity, coupled to evidence of an increase in breakthrough infections during the Delta and Omicron predominance, provides a rationale for booster immunization

Thermal Evolution of the Proton Irradiated Structure in Tungsten–5 wt% Tantalum

We have monitored the thermal evolution of the proton irradiated structure of W–5 wt% Ta alloy by in-situ annealing in a transmission electron microscope at fusion reactor temperatures of 500–1300 °C. The interstitial-type a/2 dislocation loops emit self-interstitial atoms and glide to the free sample surface during the early stages of annealing. The resultant vacancy excess in the matrix originates vacancy-type a/2 dislocation loops that grow by loop and vacancy absorption in the temperature range of 600–900 °C. Voids form at 1000 °C, by either vacancy absorption or loop collapse, and grow progressively up to 1300 °C. Tantalum delays void formation by a vacancy-solute trapping mechanism