Big fish eat small fish: implications for food chain length?

Food chains in the pelagic zones of oceans and lakes are longer than in terrestrial ecosystems. The perception of the pelagic food web has become increasingly complex by progressing from a linear food chain (phytoplankton – crustacean zooplankton – planktivorous fish – predatory fish) to a food web because of an increasing appreciation of microbial trophic pathways, side-tracks by gelatinous zooplankton and a high prevalence of omnivory. The range of predator:prey size ratios by far exceeds the traditionally assumed range of 10:1 to 100:1, from almost equal length to 105:1. The size ratios between primary consumers and top predators are 3½ orders of magnitude bigger in pelagic than in terrestrial food webs. Comparisons between different pelagic ecosystems support ecosystem size as an important factor regulating the maximal trophic level, while energy limitation of the number of trophic levels is less well supported. An almost 1:1 relationship between ingestion by predators and prey mortality and a better chemical match between primary producer and herbivore biomass are further distinctive features of the pelagic food web whose role in explaining the higher number of trophic levels in pelagic systems needs further examination

Measuring sub-mm structural displacements using QDaedalus: a digital clip-on measuring system developed for total stations

The monitoring of rigid structures of modal frequencies greater than 5 Hz and sub-mm displacement is mainly based so far on relative quantities from accelerometers, strain gauges etc. Additionally geodetic techniques such as GPS and Robotic Total Stations (RTS) are constrained by their low accuracy (few mm) and their low sampling rates. In this study the application of QDaedalus is presented, which constitutes a measuring system developed at the Geodesy and Geodynamics Lab, ETH Zurich and consists of a small CCD camera and Total Station, for the monitoring of the oscillations of a rigid structure. In collaboration with the Institute of Structural Engineering of ETH Zurich and EMPA, the QDaedalus system was used for monitoring of the sub-mm displacement of a rigid prototype beam and the estimation of its modal frequencies up to 30 Hz. The results of the QDaedalus data analysis were compared to those of accelerometers and proved to hold sufficient accuracy and suitably supplementing the existing monitoring techniques

Evaluation of natural and tracer fluorescent emission methods for droplet size measurements in a diesel spray

The final publication is available at Springer via http://dx.doi.org/10.1007/s12239-012-0070-zSpray sizing that records fluorescent emission and scattered light has been widely applied to spray diagnostics over the last two decades. Different experimental strategies have been developed, but comparing the different solutions offered has remained of interest to experimentalists. In this work, a comparison of two fluorescence strategies for measuring droplet size in the liquid phase of a last-generation DI diesel spray is conducted. The natural fluorescent emission of a commercial diesel fuel and the fluorescence emitted by a tracer (Rhodamine B) are compared using theoretical and experimental approaches. The LIF/Mie ratio commonly called Planar Droplet Sizing (PDS) technique is applied in two different ways to elucidate the possible advantages of using a fluorescent dopant. The sprays were injected under non-evaporative conditions into a constant pressure vessel that simulates densities present at the moment of injection in currently used passenger car diesel engines. Characterization of the signal properties was performed by measuring the absorption coefficient, fluorescence emission spectrum, quantum yield and lifetime of both configurations. The scattered light and fluorescence intensities were calculated to verify the dependencies of the droplet surface and volume. When applying the two techniques to quantify droplet size in dense diesel sprays, the results show that signal weakness and lack of control over the properties of natural fluorescence produce distortion in the shape of the spray and cause measurements to be unreliable. © 2012 The Korean Society of Automotive Engineers and Springer-Verlag Berlin Heidelberg.This research has been funded in the frame of the project PROFUEL reference TRA2011-26293 from Ministerio de Ciencia e Innovacion. The injectors are part of the ECN international project.Pastor Soriano, JV.; Payri, R.; Salavert Fernandez, J.; Manin, J. (2012). Evaluation of natural and tracer fluorescent emission methods for droplet size measurements in a diesel spray. International Journal of Automotive Technology. 13(5):713-724. https://doi.org/10.1007/s12239-012-0070-zS713724135Albrecht, H. E., Damaschke, N., Borys, M. and Tropea, C. (2003). Laser Doppler and Phase Doppler Measurement Techniques. Springer. Berlin.Barnes, M. D., Whitten, W. B. and Ramsey, J. M. (1994). Enhanced fluorescence yields through cavity quantumelectrodynamic effects in microdroplets. J. Optical Society of America B 11,7, 1297–1304.Benajes, J., Molina, S., Novella, R., Amorim, R., Ben Hadj Hamouda, H. and Hardy, J. (2010). Comparison of two injection systems in an HSDI diesel engine using split injection and different injector nozzles. Int. J. Automotive Technology 11,2, 139–146.Charalampous, G. and Hardalupas, Y. (2011). Method to reduce errors of droplet sizing based on the ratio of fluorescent and scattered light intensities (laser-induced fluorescence/Mie technique). Applied Optics, 50, 3622–3637.Chen, G., Mazumder, M., Chang, R. K., Swindal, J. C. and Acker, W. P. (1996). Laser diagnostics for droplet characterization: Application of morphology dependent resonances. Progress in Energy and Combustion Science 22,2, 163–188.Desantes, J. M., Payri, R., Garcia, J. M. and Salvador, F. J. (2007). A contribution to the understanding of isothermal diesel spray dynamics. Fuel 86,7–8, 1093–1101.Domann, R. and Hardalupas, Y. A. (2000). Study of parameters that influence the accuracy of the planar droplet sizing (PDS) technique. Part. Part. Syst. Charact. 3–11.Domann, R. and Hardalupas, Y. A. (2001). Spatial distribution of fluorescence within large doplets and its dependence on dye concentration. Applied Optics 40,21, 3586–3597.Domann, R. and Hardalupas, Y. A. (2002). Quantitative measurement of planar droplet sauter mean diameter in sprays using planar droplet sizing. 11th Int. Symp. Application of Laser Techniques to Fluid Mechanics, Lisbon, Portugal.Eckbreth, A. C. (1988). Laser Diagnostics for Combustion Species and Temperature. Abacus. Cambridge. Mass.Greenhalgh, D. A. (1999). Planar measurements of fuel vapour, liquid fuel, liquid droplet size and soot. Planar Optical Measurement Methods for Gas Turbine Components, 1–7.Im, K., Lin, K., Lai, M. and Chon, M. (2011). Breakup modeling of a liquid jet in cross flow. Int. J. Automotive Technology 12,4, 489–496.Jermy, M. C. and Greenhalgh, D. A. (2000). Planar dropsizing by elastic and fluorescence scattering in sprays too dense for phase doppler measurement. Appl. Phys. B, 71, 703–710.Kim, Y., Kim, K. and Lee, K. (2011). Effect of a 2-stage injection strategy on the combustion and flame characteristics in a PCCI engine. Int. J. Automotive Technology 12,5, 639–644.Ko, F. H., Weng, L. Y., Ko, C. J. and Chu, T. C. (2006). Characterization of imprinting polymeric temperature variation with fluorescent Rhodamine B molecule. Microelectronic Engineering, 83, 864–868.Lakowicz, J. R. (2006). Principles of Fluorescence Spectroscopy. 3rd Edn. Springer.Lee, S. H., Teong, J., Lee, J. T., Ryou, H. S. and Hong, K. (2005). Investigation on spray characteristics under ultrahigh injection pressure conditions. Int. J. Automotive Technology 6,2, 125–131.Lee, B., Song, J., Chang, Y. and Jeon, C. (2010). Effect of the number of fuel injector holes on characteristics of combustion and emissions in a diesel engine. Int. J. Automotive Technology 11,6, 783–791.LeGal, P., Farrugia, N. and Greenhalgh, D. A. (1999). Laser sheet dropsizing of dense sprays. Optics and Laser Techn., 31, 75–83.Lockett, R. D., Richter, J. and Greenhalgh, D. A. (1998). The characterisation of a diesel spray using combined laser induced fluorescence and laser sheet dropsizing. Conf. Lasers and Electro-Optics Europe.Magde, D., Rojas, G. E. and Seybold, P. (1999). Solvent dependence of the fluorescence lifetimes of xanthene dyes. Photochem. Photobiol., 70, 737.Naber, J. and Siebers, D. (1996). Effects of gas density and vaporization on penetration and dispersion of diesel sprays. SAE Paper No. 960034.Pastor, J. V., López, J. J., Juliá, J. E. and Benajes, J. V. (2002). Planar laser-induced fluorescence fuel concentration measurements in isothermal diesel sprays. Opt. Express 10,7, 309–323.Pastor, J. V., Payri, R., Araneo, L. and Manin, J. (2009). Correction method for droplet sizing by laser-induced fluorescence in a controlled test situation. Optical Engineering 48,1, 013601.Payri, R., Garcia, J. M., Salvador, F. J. and Gimeno, J. (2005a). Using spray momentum flux measurements to understand the influence of diesel nozzle geometry on spray characteristics. Fuel, 84, 551–561.Payri, R., Salvador, F. J., Gimeno, J. and Soare, V. (2005b). Determination of diesel sprays characteristics in real engine in-cylinder air density and pressure conditions. J. Mech. Sci. Technol., 19, 2040–2052.Payri, R., Tormos, B., Salvador, F. J. and Araneo, L. (2008). Spray droplet velocity characterization for convergent nozzles with three different diameters. Fuel 87,15, 3176–3182.Payri, F., Pastor, J., Payri, R. and Manin, J. (2011). Determination of the optical depth of a DI diesel spray. J. Mech. Sci. Technol., 25, 209–219.Potz, D., Chirst, W. and Dittus, B. (2000). Diesel nozzle: The determining interface between injection system and combustion chamber. Conf. Thermo and Fluid-dynamic Processes in Diesel Engines, Valencia, Spain.Ramírez, A. I., Som, S., Aggarwal, S. K., Kastengren, A. L., El-Hannouny, E. M., Longman, D. E. and Powell, C. F. (2009). Quantitative X-ray measurements of highpressure fuel sprays from a production heavy duty diesel injector. Experiments in Fluids 47,1, 119–134.Schulz, C. and Sick, V. (2005). Tracer-LIF diagnostics: quantitative measurement of fuel concentration, temperature and fuel/air ratio in practical combustion systems. Progress in Energy and Combustion Science, 31, 75–121.Sjoback, R. and Nygren, J. and Kubista, M. (1998). Characterization of fluorescein—oligonucleotide conjugates and measurement of local electrostatic potential. Biopolymers, 46, 445–453.Soare, V. (2007). Phase Doppler Measurement in Diesel Dense Sprays: Optimisation of Measurements and Study of the Orifice Geometry Influence Over the Spray at Microscopic Level. Ph.D. Dissertion. E.T.S. Ingenieros Industriales. Universidad Politécnica de Valencia. Spain.Williams, A. T. R., Winfield, S. A. and Miller, J. N. (1983). Relative fluorescence quantum yields using a computer controlled luminescence spectrometer. Analyst., 108, 1067.Yeh, C. N., Kosaka, H. and Kamimoto, T. A. (1993). Fluorescence/scattering imaging technique for instantaneous 2-D measurements of particle size distribution in a transient spray. Proc. 3rd Cong. Opt. Part. Sizing, Yokohama, Japan, 335–361

Methodological considerations in injury burden of disease studies across Europe: a systematic literature review

Background Calculating the disease burden due to injury is complex, as it requires many methodological choices. Until now, an overview of the methodological design choices that have been made in burden of disease (BoD) studies in injury populations is not available. The aim of this systematic literature review was to identify existing injury BoD studies undertaken across Europe and to comprehensively review the methodological design choices and assumption parameters that have been made to calculate years of life lost (YLL) and years lived with disability (YLD) in these studies. Methods We searched EMBASE, MEDLINE, Cochrane Central, Google Scholar, and Web of Science, and the grey literature supplemented by handsearching, for BoD studies. We included injury BoD studies that quantified the BoD expressed in YLL, YLD, and disability-adjusted life years (DALY) in countries within the European Region between early-1990 and mid-2021. Results We retrieved 2,914 results of which 48 performed an injury-specific BoD assessment. Single-country independent and Global Burden of Disease (GBD)-linked injury BoD studies were performed in 11 European countries. Approximately 79% of injury BoD studies reported the BoD by external cause-of-injury. Most independent studies used the incidence-based approach to calculate YLDs. About half of the injury disease burden studies applied disability weights (DWs) developed by the GBD study. Almost all independent injury studies have determined YLL using national life tables. Conclusions Considerable methodological variation across independent injury BoD assessments was observed; differences were mainly apparent in the design choices and assumption parameters towards injury YLD calculations, implementation of DWs, and the choice of life table for YLL calculations. Development and use of guidelines for performing and reporting of injury BoD studies is crucial to enhance transparency and comparability of injury BoD estimates across Europe and beyond

Burden of non-communicable disease studies in Europe: a systematic review of data sources and methodological choices

Background: Assessment of disability-adjusted life years (DALYs) resulting from non-communicable diseases (NCDs) requires specific calculation methods and input data. The aims of this study were to (i) identify existing NCD burden of disease (BoD) activities in Europe; (ii) collate information on data sources for mortality and morbidity; and (iii) provide an overview of NCD-specific methods for calculating NCD DALYs. Methods: NCD BoD studies were systematically searched in international electronic literature databases and in grey literature. We included all BoD studies that used the DALY metric to quantify the health impact of one or more NCDs in countries belonging to the European Region. Results: A total of 163 BoD studies were retained: 96 (59%) were single-country or sub-national studies and 67 (41%) considered more than one country. Of the single-country studies, 29 (30%) consisted of secondary analyses using existing Global Burden of Disease (GBD) results. Mortality data were mainly derived (49%) from vital statistics. Morbidity data were frequently (40%) drawn from routine administrative and survey datasets, including disease registries and hospital discharge databases. The majority (60%) of national BoD studies reported mortality corrections. Multimorbidity adjustments were performed in 18% of national BoD studies. Conclusion: The number of national NCD BoD assessments across Europe increased over time, driven by an increase in BoD studies that consisted of secondary data analysis of GBD study findings. Ambiguity in reporting the use of NCD-specific BoD methods underlines the need for reporting guidelines of BoD studies to enhance the transparency of NCD BoD estimates across Europe

Global, regional, and national burden of rheumatoid arthritis, 1990-2020, and projections to 2050:a systematic analysis of the Global Burden of Disease Study 2021

Background: Rheumatoid arthritis is a chronic autoimmune inflammatory disease associated with disability and premature death. Up-to-date estimates of the burden of rheumatoid arthritis are required for health-care planning, resource allocation, and prevention. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021, we provide updated estimates of the prevalence of rheumatoid arthritis and its associated deaths and disability-adjusted life-years (DALYs) by age, sex, year, and location, with forecasted prevalence to 2050. Methods: Rheumatoid arthritis prevalence was estimated in 204 countries and territories from 1990 to 2020 using Bayesian meta-regression models and data from population-based studies and medical claims data (98 prevalence and 25 incidence studies). Mortality was estimated from vital registration data with the Cause of Death Ensemble model (CODEm). Years of life lost (YLL) were calculated with use of standard GBD lifetables, and years lived with disability (YLDs) were estimated from prevalence, a meta-analysed distribution of rheumatoid arthritis severity, and disability weights. DALYs were calculated by summing YLLs and YLDs. Smoking was the only risk factor analysed. Rheumatoid arthritis prevalence was forecast to 2050 by logistic regression with Socio-Demographic Index as a predictor, then multiplying by projected population estimates. Findings: In 2020, an estimated 17·6 million (95% uncertainty interval 15·8–20·3) people had rheumatoid arthritis worldwide. The age-standardised global prevalence rate was 208·8 cases (186·8–241·1) per 100 000 population, representing a 14·1% (12·7–15·4) increase since 1990. Prevalence was higher in females (age-standardised female-to-male prevalence ratio 2·45 [2·40–2·47]). The age-standardised death rate was 0·47 (0·41–0·54) per 100 000 population (38 300 global deaths [33 500–44 000]), a 23·8% (17·5–29·3) decrease from 1990 to 2020. The 2020 DALY count was 3 060 000 (2 320 000–3 860 000), with an age-standardised DALY rate of 36·4 (27·6–45·9) per 100 000 population. YLDs accounted for 76·4% (68·3–81·0) of DALYs. Smoking risk attribution for rheumatoid arthritis DALYs was 7·1% (3·6–10·3). We forecast that 31·7 million (25·8–39·0) individuals will be living with rheumatoid arthritis worldwide by 2050. Interpretation: Rheumatoid arthritis mortality has decreased globally over the past three decades. Global age-standardised prevalence rate and YLDs have increased over the same period, and the number of cases is projected to continue to increase to the year 2050. Improved access to early diagnosis and treatment of rheumatoid arthritis globally is required to reduce the future burden of the disease. Funding: Bill &amp; Melinda Gates Foundation, Institute of Bone and Joint Research, and Global Alliance for Musculoskeletal Health.</p

Global, regional, and national burden of rheumatoid arthritis, 1990-2020, and projections to 2050:a systematic analysis of the Global Burden of Disease Study 2021

Background: Rheumatoid arthritis is a chronic autoimmune inflammatory disease associated with disability and premature death. Up-to-date estimates of the burden of rheumatoid arthritis are required for health-care planning, resource allocation, and prevention. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021, we provide updated estimates of the prevalence of rheumatoid arthritis and its associated deaths and disability-adjusted life-years (DALYs) by age, sex, year, and location, with forecasted prevalence to 2050. Methods: Rheumatoid arthritis prevalence was estimated in 204 countries and territories from 1990 to 2020 using Bayesian meta-regression models and data from population-based studies and medical claims data (98 prevalence and 25 incidence studies). Mortality was estimated from vital registration data with the Cause of Death Ensemble model (CODEm). Years of life lost (YLL) were calculated with use of standard GBD lifetables, and years lived with disability (YLDs) were estimated from prevalence, a meta-analysed distribution of rheumatoid arthritis severity, and disability weights. DALYs were calculated by summing YLLs and YLDs. Smoking was the only risk factor analysed. Rheumatoid arthritis prevalence was forecast to 2050 by logistic regression with Socio-Demographic Index as a predictor, then multiplying by projected population estimates. Findings: In 2020, an estimated 17·6 million (95% uncertainty interval 15·8–20·3) people had rheumatoid arthritis worldwide. The age-standardised global prevalence rate was 208·8 cases (186·8–241·1) per 100 000 population, representing a 14·1% (12·7–15·4) increase since 1990. Prevalence was higher in females (age-standardised female-to-male prevalence ratio 2·45 [2·40–2·47]). The age-standardised death rate was 0·47 (0·41–0·54) per 100 000 population (38 300 global deaths [33 500–44 000]), a 23·8% (17·5–29·3) decrease from 1990 to 2020. The 2020 DALY count was 3 060 000 (2 320 000–3 860 000), with an age-standardised DALY rate of 36·4 (27·6–45·9) per 100 000 population. YLDs accounted for 76·4% (68·3–81·0) of DALYs. Smoking risk attribution for rheumatoid arthritis DALYs was 7·1% (3·6–10·3). We forecast that 31·7 million (25·8–39·0) individuals will be living with rheumatoid arthritis worldwide by 2050. Interpretation: Rheumatoid arthritis mortality has decreased globally over the past three decades. Global age-standardised prevalence rate and YLDs have increased over the same period, and the number of cases is projected to continue to increase to the year 2050. Improved access to early diagnosis and treatment of rheumatoid arthritis globally is required to reduce the future burden of the disease. Funding: Bill &amp; Melinda Gates Foundation, Institute of Bone and Joint Research, and Global Alliance for Musculoskeletal Health.</p

Automated office blood pressure measurements in primary care are misleading in more than one third of treated hypertensives: The VALENTINE-Greece Home Blood Pressure Monitoring study

Abstract Background This study assessed the diagnostic reliability of automated office blood pressure (OBP) measurements in treated hypertensive patients in primary care by evaluating the prevalence of white coat hypertension (WCH) and masked uncontrolled hypertension (MUCH) phenomena. Methods Primary care physicians, nationwide in Greece, assessed consecutive hypertensive patients on stable treatment using OBP (1 visit, triplicate measurements) and home blood pressure (HBP) measurements (7 days, duplicate morning and evening measurements). All measurements were performed using validated automated devices with bluetooth capacity (Omron M7 Intelli-IT). Uncontrolled OBP was defined as ≥140/90 mmHg, and uncontrolled HBP was defined as ≥135/85 mmHg. Results A total of 790 patients recruited by 135 doctors were analyzed (age: 64.5 ± 14.4 years, diabetics: 21.4%, smokers: 20.6%, and average number of antihypertensive drugs: 1.6 ± 0.8). OBP (137.5 ± 9.4/84.3 ± 7.7 mmHg, systolic/diastolic) was higher than HBP (130.6 ± 11.2/79.9 ± 8 mmHg; difference 6.9 ± 11.6/4.4 ± 7.6 mmHg, p Conclusions In primary care, automated OBP measurements are misleading in approximately 40% of treated hypertensive patients. HBP monitoring is mandatory to avoid overtreatment of subjects with WCH phenomenon and prevent undertreatment and subsequent excess cardiovascular disease in MUCH

Learning environment, attitudes and anxiety across the transition from primary to secondary school mathematics

Past research has revealed that, relative to primary-school students, high-school students have less-positive attitudes to mathematics and perceive their classroom environments and teacher–student relationships less favourably. This study involved the transition experience of 541 students in 47 classes in 15 primary (year 7) and secondary (year 8) government and Catholic schools in metropolitan and regional South Australia. Scales were adapted from three established instruments, namely, the What Is Happening In this Class?, Test of Mathematics Related Attitudes and Revised Mathematics Anxiety Ratings Scale, to identify changes across the transition from primary to secondary school in terms of the classroom learning environment and students’ attitude/anxiety towards mathematics. Relative to year 7 students, year 8 students reported less Involvement, less positive Attitude to Mathematical Inquiry, less Enjoyment of Mathematics and greater Mathematics Anxiety. Differences between students in Years 7 and 8 were very similar for male and female students, although the magnitude of sex differences in attitudes was slightly different in Years 7 and 8