Thermomechanical properties of amorphous metallic tungsten-oxygen and tungsten-oxide coatings

In this work, we investigate the correlation between morphology, composition, and the mechanical properties of metallic amorphous tungsten-oxygen and amorphous tungsten-oxide films deposited by Pulsed Laser Deposition. This correlation is investigated by the combined use of Brillouin Spectroscopy and the substrate curvature method. The stiffness of the films is strongly affected by both the oxygen content and the mass density. The elastic moduli show a decreasing trend as the mass density decreases and the oxygen-tungsten ratio increases. A plateaux region is detected in correspondence of the transition between metallic and oxide films. The compressive residual stresses, moderate stiffness and high local ductility that characterize compact amorphous tungsten-oxide films make them promising for applications involving thermal or mechanical loads. The coefficient of thermal expansion is quite high (i.e. 8.9 $\cdot$ 10$^{-6}$ K$^{-1}$), being strictly correlated to the amorphous structure and stoichiometry of the films. Under thermal treatments they show a quite low relaxation temperature (i.e. 450 K). They crystallize into the $\gamma$ monoclinic phase of WO$_3$ starting from 670 K, inducing an increase by about 70\% of material stiffness.Comment: The research leading to these results has also received funding from the European Research Council Consolidator Grant ENSURE (ERC-2014-CoG No. 647554). The views and opinions expressed herein do not necessarily reflect those of the European Commissio

Coefficient of thermal expansion of nanostructured tungsten based coatings assessed by thermally induced substrate curvature method

The in plane coefficient of thermal expansion (CTE) and the residual stress of nanostructured W based coatings are extensively investigated. The CTE and the residual stresses are derived by means of an optimized ad-hoc developed experimental setup based on the detection of the substrate curvature by a laser system. The nanostructured coatings are deposited by Pulsed Laser Deposition. Thanks to its versatility, nanocrystalline W metallic coatings, ultra-nano-crystalline pure W and W-Tantalum coatings and amorphous-like W coatings are obtained. The correlation between the nanostructure, the residual stress and the CTE of the coatings are thus elucidated. We find that all the samples show a compressive state of stress that decreases as the structure goes from columnar nanocrystalline to amorphous-like. The CTE of all the coatings is higher than the one of the corresponding bulk W form. In particular, as the grain size shrinks, the CTE increases from 5.1 10$^{-6}$ K$^{-1}$ for nanocrystalline W to 6.6 10$^{-6}$ K$^{-1}$ in the ultra-nano-crystalline region. When dealing with amorphous W, the further increase of the CTE is attributed to a higher porosity degree of the samples. The CTE trend is also investigated as function of materials stiffness. In this case, as W coatings become softer, the easier they thermally expand.Comment: The research leading to these results has also received funding from the European Research Council Consolidator Grant ENSURE (ERC-2014-CoG No. 647554

A case for associational resistance : Apparent support for the stress gradient hypothesis varies with study system

publishedVersio

Thermomechanical properties of amorphous metallic tungsten-oxygen and tungsten-oxide coatings

Metallic amorphous tungsten-oxygen and amorphous tungsten-oxide films, deposited by Pulsed Laser Deposition, are characterized. The correlation is investigated between morphology, composition, and structure, measured by various techniques, and the mechanical properties, characterized by Brillouin Spectroscopy and the substrate curvature method. The stiffness of the films is correlated to the oxygen content and the mass density. The elastic moduli decrease as the mass density decreases and the oxygen-tungsten ratio increases. A plateau region is observed around the transition between the metal-like (conductive and opaque) films and the oxide ones (non-conductive and transparent). The compressive residual stresses, moderate stiffness and high local ductility of compact amorphous tungsten-oxide films are interesting for applications involving thermal or mechanical loads. The coefficient of thermal expansion is quite high (8.9 ⋅ 10 −6 K −1 ), being strictly correlated to the amorphous structure and stoichiometry of the films. Upon thermal treatments the coatings show a quite low relaxation temperature of 450 K. Starting from 670 K, they crystallize into the γ monoclinic phase of WO 3 , the stiffness increasing by about 70%. The measured thermomechanical properties provide a guidance for the design of devices which include a tungsten based layer, in order to assure their mechanical integrity

Clinical and operational value of the extensively drug-resistant tuberculosis definition.

Currently, no information is available on the effect of resistance/susceptibility to first-line drugs different from isoniazid and rifampicin in determining the outcome of extensively drug-resistant tuberculosis (XDR-TB) patients, and whether being XDR-TB is a more accurate indicator of poor clinical outcome than being resistant to all first-line anti-tuberculosis (TB) drugs. To investigate this issue, a large series of multidrug-resistant TB (MDR-TB) and XDR-TB cases diagnosed in Estonia, Germany, Italy and the Russian Federation during the period 1999-2006 were analysed. Drug-susceptibility testing for first- and second-line anti-TB drugs, quality assurance and treatment delivery was performed according to World Health Organization recommendations in all study sites. Out of 4,583 culture-positive TB cases analysed, 361 (7.9%) were MDR and 64 (1.4%) were XDR. XDR-TB cases had a relative risk (RR) of 1.58 to have an unfavourable outcome compared with MDR-TB cases resistant to all first-line drugs (isoniazid, rifampicin ethambutol, streptomycin and, when tested, pyrazinamide), and an RR of 2.61 compared with "other" MDR-TB cases (those susceptible to at least one first-line anti-TB drug among ethambutol, pyrazinamide and streptomycin, regardless of resistance to the second-line drugs not defining XDR-TB). The emergence of extensively drug-resistant tuberculosis confirms that problems in tuberculosis management are still present in Europe. While waiting for new tools which will facilitate management of extensively drug-resistant tuberculosis, accessibility to quality diagnostic and treatment services should be urgently ensured and adequate public health policies should be rapidly implemented to prevent further development of drug resistance

Drip and Mate Operations Acting in Test Tube Systems and Tissue-like P systems

The operations drip and mate considered in (mem)brane computing resemble the operations cut and recombination well known from DNA computing. We here consider sets of vesicles with multisets of objects on their outside membrane interacting by drip and mate in two different setups: in test tube systems, the vesicles may pass from one tube to another one provided they fulfill specific constraints; in tissue-like P systems, the vesicles are immediately passed to specified cells after having undergone a drip or mate operation. In both variants, computational completeness can be obtained, yet with different constraints for the drip and mate operations

Quality parameters of hunted game meat : sensory analysis and pH monitoring

The aim of the present research is to propose a new, quick and objective method for the certification of hunted and/or culled wild game meat quality and to monitor its origin and the hunting practices adopted by hunters. The expected deliverable is a new labelling scheme for Italian hunted wild game meat that will guarantee high quality and safety standards for consumers and will decrease transaction costs of the supply chains. During the 2015, 2016 and 2017 hunting seasons, 1,056 hunted wild ungulates were sampled. Specifically, alpine chamois (n=537), roe deer (n=113), red deer (n=342) and wild boar (n=64), which were all hunted in the VCO2-Ossola Nord hunting district (Verbania Province, Piedmont, Italy). Samples of the longissimus dorsi were collected to evaluate the nutritional parameters and the acid profiles of the products. As a measure of meat quality, pH values have been recorded after slaughtering by inserting a probe in the semimembranosus muscle. The results were categorized as DFD (pH 656,2), intermediate DFD (5,8 64pH<6,2) and high-quality meat (pH <5,8). As explanatory variables for the quality of wild game meat, differences based on age, gender and hunting practices were considered. Concerning the latter variables, measures were collected from animals received at hunting districts control centers by trained technicians who also collected information on the hunting practices, i.e., bleeding and evisceration of the carcasses and number of shots. Nutritional values showed low fat (<3 g per 100 g), low saturated fat (<1,5 g per 100 g) and high protein contents. Furthermore, wild game meat has high values of \u3c93 and CLA, ensuring a positive \u3c96/\u3c93 ratio. Differences were found in the concentrations of fat between age and gender, considering that during the mating season, adult males' weight loss can exceed 40%. Hunting practices seem to affect meat qualit

The Italian registry of pulmonary non-tuberculous mycobacteria - IRENE:The study protocol

Background: A substantial increase in pulmonary and extra-pulmonary diseases due to non-tuberculous mycobacteria (NTM) has been documented worldwide, especially among subjects suffering from chronic respiratory diseases and immunocompromised patients. Many questions remain regarding the epidemiology of pulmonary disease due to NTM (NTM-PD) mainly because reporting of NTM-PD to health authorities is not mandated in several countries, including Italy. This manuscript describes the protocol of the first Italian registry of adult patients with respiratory infections caused by NTM (IRENE). Methods: IRENE is an observational, multicenter, prospective, cohort study enrolling consecutive adult patients with either a NTM respiratory isolate or those with NTM-PD. A total of 41 centers, including mainly pulmonary and infectious disease departments, joined the registry so far. Adult patients with all of the following are included in the registry: 1) at least one positive culture for any NTM species from any respiratory sample; 2) at least one positive culture for NTM isolated in the year prior the enrolment and/or prescribed NTM treatment in the year prior the enrolment; 3) given consent to inclusion in the study. No exclusion criteria are applied to the study. Patients are managed according to standard operating procedures implemented in each IRENE clinical center. An online case report form has been developed to collect patients' demographics, comorbidities, microbiological, laboratory, functional, radiological, clinical, treatment and outcome data at baseline and on an annual basis. An IRENE biobank has also been developed within the network and linked to the clinical data of the registry. Conclusions: IRENE has been developed to inform the clinical and scientific community on the current management of adult patients with NTM respiratory infections in Italy and acts as a national network to increase the disease's awareness