Computational analysis of performance deterioration of a wind turbine blade strip subjected to environmental erosion

Wind-turbine blade rain and sand erosion, over long periods of time, can degrade the aerodynamic performance and therefore the power production. Computational analysis of the erosion can help engineers have a better understanding of the maintenance and protection requirements. We present an integrated method for this class of computational analysis. The main components of the method are the streamline-upwind/Petrov–Galerkin (SUPG) and pressure-stabilizing/Petrov–Galerkin (PSPG) stabilizations, a finite element particle-cloud tracking method, an erosion model based on two time scales, and the solid-extension mesh moving technique (SEMMT). The turbulent-flow nature of the analysis is handled with a Reynolds-averaged Navier–Stokes model and SUPG/PSPG stabilization, the particle-cloud trajectories are calculated based on the computed flow field and closure models defined for the turbulent dispersion of particles, and one-way dependence is assumed between the flow and particle dynamics. Because the geometry update due to the erosion has a very long time scale compared to the fluid–particle dynamics, the update takes place in a sequence of “evolution steps” representing the impact of the erosion. A scale-up factor, calculated in different ways depending on the update threshold criterion, relates the erosions and particle counts in the evolution steps to those in the fluid–particle simulation. As the blade geometry evolves, the mesh is updated with the SEMMT. We present computational analysis of rain and sand erosion for a wind-turbine blade strip, including a case with actual rainfall data and experimental aerodynamic data for eroded airfoil geometries

Application of a physics-based model to predict the performance curves of pumps as turbines

This paper presents the application of a physics-based simulation model, aimed at predicting the performance curves of pumps as turbines (PATs) based on the performance curves of the respective pump. The simulation model implements the equations for estimating head, power and efficiency for both direct and reverse operation. Model tuning on a given machine is performed by using loss coefficients and specific parameters identified by means of an optimization procedure, which simultaneously optimizes both the pump and PAT operation. The simulation model is calibrated in this paper on data taken from the literature, reporting both pump and PAT performance curves for head and efficiency over the entire range of operation. The performance data refer to twelve different centrifugal pumps, running in both pump and PAT mode. The accuracy of the predictions of the physics-based simulation model is quantitatively assessed against both pump and PAT performance curves and best efficiency point. Prediction consistency from a physical point of view is also evaluated

Precision diboson measurements at hadron colliders

We discuss the measurements of the anomalous triple gauge couplings at Large Hadron Collider focusing on the contribution of the O-3W and O-3 (W) over tilde operators. These deviations were known to be particularly hard to measure due to their suppressed interference with the SM amplitudes in the inclusive processes, leading to approximate flat directions in the space of these Wilson coefficients. We present the prospects for the measurements of these interactions at HL-LHC and HE-LHC using exclusive variables sensitive to the interference terms and taking carefully into account effects appearing due to NLO QCD corrections

Prediction of compressor efficiency by means of Bayesian Hierarchical Models

The prediction of time evolution of gas turbine performance is an emerging requirement of modern prognostics and health management systems, aimed at improving system reliability and availability, while reducing life cycle costs. In this work, a data-driven Bayesian Hierarchical Model (BHM) is employed to perform a probabilistic prediction of gas turbine future behavior. The BHM approach is applied to field data, taken from the literature and representative of gas turbine degradation over time for a time frame of 7-9 years. The predicted variable is compressor efficiency collected from three power plants characterized by high degradation rate. The capabilities of the BHM prognostic method are assessed by considering two different forecasting approaches, i.e. single-step and multi-step forecast. For the considered field data, the prediction accuracy is very high for both approaches. In fact, the average values of the prediction errors are lower than 0.3% for single-step prediction and lower than 0.6% for multi- step prediction

Proton NMR studies of the electronic structure of ZrH/sub x/

The proton spin lattice relaxation times and Knight shifts were measured in f.c.c. (delta-phase) and f.c.t. (epsilon-phase) ZrH/sub x/ for 1.5 or = to x or = to 2.0. Both parameters indicate that N(E/sub F/) is very dependent upon hydrogen content with a maximum occurring at ZrH1 83. This behavior is ascribed to modifications in N(E/sub F/) through a fcc/fct distortion in ZrH/sub x/ associated with a Jahn-Teller effect

Pulsed electric fields as a green technology for the extraction of bioactive compounds from thinned peach by-products

Thinned fruits are agricultural by-products which nowadays have few economic or environmental benefits. However, previous studies have revealed that these immature fruits have a large amount of antioxidant compounds. The aim of this study was to evaluate whether pulsed electric fields (PEF) might be a suitable green technology for enhancing the extraction of phenols, flavonoids and antioxidant compounds from fresh thinned peaches, thus reducing the use of methanol. Moreover, response surface methodology has been used to determine the optimal PEF treatment conditions, observing that the solvent is the main factor. The highest amounts of bioactive compounds were extracted using 80% methanol and no PEF. Methanol combined with PEF produced a negative effect on the extraction yield. However, the use of water as a solvent increased the amount of total bioactive compounds and individual phenols (chlorogenic acid, coumaric acid and neochlorogenic acid). Thus, PEF-assisted extraction of bioactive compounds from thinned peach fruits using water as a solvent is an alternative to conventional extraction methods which require dried products, large amounts of organic solvents and long extraction times

Complex Systems Science: Dreams of Universality, Reality of Interdisciplinarity

Using a large database (~ 215 000 records) of relevant articles, we empirically study the "complex systems" field and its claims to find universal principles applying to systems in general. The study of references shared by the papers allows us to obtain a global point of view on the structure of this highly interdisciplinary field. We show that its overall coherence does not arise from a universal theory but instead from computational techniques and fruitful adaptations of the idea of self-organization to specific systems. We also find that communication between different disciplines goes through specific "trading zones", ie sub-communities that create an interface around specific tools (a DNA microchip) or concepts (a network).Comment: Journal of the American Society for Information Science and Technology (2012) 10.1002/asi.2264

Thinned stone fruits are a source of polyphenols and antioxidant compounds

BACKGROUND: Thinned fruits are agricultural by-products that contain large quantities of interesting compounds due to their early maturity stage. In this work, the phenolic profile and the antioxidant activity of six thinned stone fruits (apricot, cherry, flat peach, peach, plum and nectarine) have been investigated, focussing on proanthocyanidins. RESULTS: Thinned nectarine had the highest content of total phenols 67.43 mg gallic acid equivalents (GAE) g-1 dry weight (DW)] and total flavonoids (56.97 mg CE g-1 DW) as well as the highest antioxidant activity measured by DPPH scavenging (133.30 mg Trolox equivalents (TE) g-1 DW] and FRAP assay (30.42 mg TE g-1 DW). Proanthocyanidins were very abundant in these by-products, and the main phenolic group quantified in cherry (10.54 mg g-1 DW), flat peach (33.47 mg g-1 DW) and nectarine (59.89 mg g-1 DW), while hydroxycinnamic acids predominate in apricot, peach and plum (6.67, 22.04 and 23.75 mg g-1 DW, respectively). The low, mean degree of polymerisation of proanthocyanidins suggests that their bioavailability could be very high. CONCLUSIONS: This study shows that thinned stone fruit extracts might be used as antioxidants in foods or as a source of compounds with health-related benefits that can be used in the pharmaceutical, cosmetic and food industries

HYDROGEN PRODUCED BY SOLAR ENERGY AND THEIR USE AS CLEAN FUEL FOR POWER GENERATION IN A COMBINED CYCLE POWER PLANT

The solar energy is one of the most promising energy sources expected for the future, due at their huge potential and the wide availability around the world. However, nowadays this important source of energy is not being harnessed or even addressed in their full potential. According to the last statements, it is important to develop solar energy conversion systems of high efficiency, as well as spreading its use in other forms besides the traditional systems of electric power generation or heating systems. For this reason, in this paper, it is explored the production of hydrogen through solar energy utilization, and the later electrical energy production by burning the produced hydrogen in a combined cycle power plant. The process was modelled for 3 MWe of electricity generation, and using the organic Rankine cycle. The main process for producing hydrogen from water using solar energy is based on a two steps redox thermochemical cycle, which has a theoretical conversion efficiencies of 54% at 1600 K. It is expected that this paper could contributed to the development of ways to enable a better integration of the solar energy with the current electricity generation technologies, as well as to incentive the use of the hydrogen as a clean fuel