Impacto de diferentes niveles de nisina como agente bioconservador en la calidad química, sensorial y microbiológica de filetes de lubina (Dicentrarchus labrax) envasados al vacío y almacenados a 4 ± 2 °C.

Nisin is produced by Lactococcus lactis subsp. lactis and is also known as an antimicrobial agent especially effective against gram-positive bacteria. It has long been used as a preservative in foods and beverages and is generally regarded as safe (GRAS). In the present work, the effects of different concentrations of nisin (0.2, 0.4 and 0.8%) on the sensory, chemical and microbiological quality and shelf-life of vacuum-packed sea bass (Dicentrarchus labrax) fillets were investigated during chilled (4 ± 2 °C) storage. The sensory points for raw and cooked fillets increased with time during the storage period (p < 0.05). The control group, with scores of 9.08, was rejected by panelists on day 12; whereas nisin-treated groups were rejected on day 14 with scores ranging from 9.00-9.17 score. As a result of chemical analyses, lower values (p < 0.05) were obtained from the nisin groups with low oxidative rancidity. Moreover, nisin inhibited microbial growth, which shows antimicrobial activity. Consequently, it was concluded that the application of nisin (especially 0.8%) preserved the organoleptic quality and extended the shelf-life of sea bass fillets.La nisina es producida por Lactococcus lactis subsp. lactis y conocida como agente antimicrobiano, especialmente contra las bacterias grampositivas. Se ha utilizado como conservante en alimentos y bebidas durante mucho tiempo y generalmente se considera seguro (GRAS). En el presente trabajo, se investigaron los efectos de diferentes concentraciones de nisina (0,2, 0,4 y 0,8%) sobre la calidad sensorial, química y microbiológica y la vida útil de los filetes de lubina (Dicentrarchus labrax) envasados al vacío durante el enfriamiento y almacenamiento (4 ± 2 °C). La puntuación sensorial de los filetes crudos y cocidos aumentó con el tiempo durante el período de almacenamiento (p <0,05). El grupo de control con puntuación de 9,08 fue rechazado por los panelistas el día 12, mientras que los grupos de tratamiento con nisina fueron rechazados el día 14 con un rango de puntuación de 9,00-9,17. Como resultado de los análisis químicos, se obtuvieron valores más bajos (p < 0,05) de los grupos de nisina con baja rancidez oxidativa. Además, la nisina inhibió el crecimiento microbiano que muestra actividad antimicrobiana. En consecuencia, se evaluó que la aplicación de nisina (especialmente 0,8%) conservó la calidad organoléptica y prolongó la vida útil de la lubina

Effects of honey addition on antioxidative properties of different herbal teas

Tea and herbal infusions are among the major contributors of phenolic compounds, specifically flavonoids, in our daily diet. Honey is another antioxidant-rich food that is widely used as a natural sweetener. In this work, the effects of honey addition on antioxidant properties of different herbal teas were investigated. For this purpose, 2 different types of honey (flower and pine honey) were added into 9 different herbal teas (melissa, green tea, rosehip, sage, echinacea, fennel, linden, daisy, and ginger) at 4 different temperatures (55°C, 65°C, 75°C, and 85°C), and the changes in the content of total pheolics, total flavonoids, and total antioxidant capacity were determined. The total phenolic content and the total antioxidant capacity of the honey-added-tea samples were found to be increased (up to 57% for both), especially with pine honey and at higher temperatures of honey addition. The findings of this study supported the use of honey as a natural sweetener in tea in order to be able to benefit from the health-enhancing antioxidative properties of these two promising food products

Solvable Systems of Linear Differential Equations

The asymptotic iteration method (AIM) is an iterative technique used to find exact and approximate solutions to second-order linear differential equations. In this work, we employed AIM to solve systems of two first-order linear differential equations. The termination criteria of AIM will be re-examined and the whole theory is re-worked in order to fit this new application. As a result of our investigation, an interesting connection between the solution of linear systems and the solution of Riccati equations is established. Further, new classes of exactly solvable systems of linear differential equations with variable coefficients are obtained. The method discussed allow to construct many solvable classes through a simple procedure.Comment: 13 page

Effect of Er:YAG laser enamel conditioning and moisture on the microleakage of a hydrophilic sealant

For a given sealant, successful pit and fissure sealing is principally governed by the enamel conditioning technique and the presence of moisture contamination. A new generation of hydrophilic resin sealants is reported to tolerate moisture. This study investigates the impact of Er:YAG laser pre-conditioning and moisture contamination on the microleakage of a recent hydrophilic sealant. Occlusal surfaces of extracted human molars were either acid etched (n = 30), or successively lased and acid etched (n = 30). Ten teeth from each group were either air-dried, water-contaminated, or saliva-contaminated prior to sealing with UltraSeal XT® hydro™. Samples were inspected for penetration of fuchsin dye following 3000 thermocycles between 5 and 50 °C, and the enamel–sealant interfaces were observed by scanning electron microscopy (SEM). Significant differences in microleakage were evaluated using the Mann–Whitney U test with Bonferroni adjustment (p = 0.05). Laser pre-conditioning significantly reduced dye penetration irrespective of whether the enamel surface was moist or dry. Microleakageof water-contaminated acid etched teeth was significantly greater than that of their air-dried or saliva-contaminated counterparts. SEM analysis demonstrated good adaptation in all groups with the exception of water-contaminated acid etched teeth which exhibited relatively wide gaps. In conclusion, this hydrophilic sealant tolerates the presence of saliva, although water was found to impair its sealing ability. Laser pre-conditioning significantly decreases microleakage in all cases

Design of multi-octave band GaN-HEMT power amplifier

This paper describes design, fabrication and measurement of 6 GHz - 18 GHz monolithic microwave integrated circuit (MMIC) amplifier. The amplifier is realized as coplanar waveguide (CPW) circuit using 0.3 μm-gate Gallium-Nitride (GaN) HEMT technology. The amplifier has a small signal gain of 7 ± 0.75 dB. The output power at 3dB compression is better than 24 dBm with 16%-19% drain efficiency for the whole 6 GHz-18 GHz frequency band under continuous wave (CW) power. © 2012 IEEE

Evaluating Human-Language Model Interaction

Many real-world applications of language models (LMs), such as writing assistance and code autocomplete, involve human-LM interaction. However, most benchmarks are non-interactive in that a model produces output without human involvement. To evaluate human-LM interaction, we develop a new framework, Human-AI Language-based Interaction Evaluation (HALIE), that defines the components of interactive systems and dimensions to consider when designing evaluation metrics. Compared to standard, non-interactive evaluation, HALIE captures (i) the interactive process, not only the final output; (ii) the first-person subjective experience, not just a third-party assessment; and (iii) notions of preference beyond quality (e.g., enjoyment and ownership). We then design five tasks to cover different forms of interaction: social dialogue, question answering, crossword puzzles, summarization, and metaphor generation. With four state-of-the-art LMs (three variants of OpenAI's GPT-3 and AI21 Labs' Jurassic-1), we find that better non-interactive performance does not always translate to better human-LM interaction. In particular, we highlight three cases where the results from non-interactive and interactive metrics diverge and underscore the importance of human-LM interaction for LM evaluation.Comment: Authored by the Center for Research on Foundation Models (CRFM) at the Stanford Institute for Human-Centered Artificial Intelligence (HAI

Cthrc1 Is a Positive Regulator of Osteoblastic Bone Formation

Bone mass is maintained by continuous remodeling through repeated cycles of bone resorption by osteoclasts and bone formation by osteoblasts. This remodeling process is regulated by many systemic and local factors.We identified collagen triple helix repeat containing-1 (Cthrc1) as a downstream target of bone morphogenetic protein-2 (BMP2) in osteochondroprogenitor-like cells by PCR-based suppression subtractive hybridization followed by differential hybridization, and found that Cthrc1 was expressed in bone tissues in vivo. To investigate the role of Cthrc1 in bone, we generated Cthrc1-null mice and transgenic mice which overexpress Cthrc1 in osteoblasts (Cthrc1 transgenic mice). Microcomputed tomography (micro-CT) and bone histomorphometry analyses showed that Cthrc1-null mice displayed low bone mass as a result of decreased osteoblastic bone formation, whereas Cthrc1 transgenic mice displayed high bone mass by increase in osteoblastic bone formation. Osteoblast number was decreased in Cthrc1-null mice, and increased in Cthrc1 transgenic mice, respectively, while osteoclast number had no change in both mutant mice. In vitro, colony-forming unit (CFU) assays in bone marrow cells harvested from Cthrc1-null mice or Cthrc1 transgenic mice revealed that Cthrc1 stimulated differentiation and mineralization of osteoprogenitor cells. Expression levels of osteoblast specific genes, ALP, Col1a1, and Osteocalcin, in primary osteoblasts were decreased in Cthrc1-null mice and increased in Cthrc1 transgenic mice, respectively. Furthermore, BrdU incorporation assays showed that Cthrc1 accelerated osteoblast proliferation in vitro and in vivo. In addition, overexpression of Cthrc1 in the transgenic mice attenuated ovariectomy-induced bone loss.Our results indicate that Cthrc1 increases bone mass as a positive regulator of osteoblastic bone formation and offers an anabolic approach for the treatment of osteoporosis

Cardiovascular and metabolic influences of fetal smoke exposure

Many epidemiological studies showed associations of low birth weight with cardiovascular disease, type 2 diabetes and obesity. The associations seem to be consistent and stronger among subjects with a postnatal catch up growth. It has been suggested that developmental changes in response to adverse fetal exposures might lead to changes in the fetal anatomy and physiology. These adaptations may be beneficial for short term, but may lead to common diseases in adulthood. Maternal smoking during pregnancy is one of the most important adverse fetal exposures in Western countries, and is known to be associated with a 150–200 g lower birth weight. An accumulating body of evidence suggests that maternal smoking during pregnancy might be involved in pathways leading to both low birth weight and common diseases, including cardiovascular disease, type 2 diabetes and obesity, in adulthood. In this review, we discuss epidemiological studies focused on the associations of maternal smoking with fetal growth and development and cardiovascular and metabolic disease in later life. We also discuss potential biological mechanisms, and challenges for future epidemiological studies

A comprehensive analysis of the epidemiology and clinical characteristics of anti-LRP4 in myasthenia gravis

n/