Strontium ranelate improves bone strength in ovariectomized rat by positively influencing bone resistance determinants

Summary: Treatment of adult ovariectomized (OVX) rats with strontium ranelate prevented vertebral biomechanics degradation as a result of the prevention of bone loss and micro-architecture deterioration associated to an effect on intrinsic bone material quality. Strontium ranelate influenced the determinants of bone strength by prevention of ovariectomy-induced changes which contribute to explain strontium ranelate antifracture efficacy. Introduction: Strontium ranelate effects on the determinants of bone strength in OVX rats were evaluated. Methods: Adult female Sprague-Dawley rats were OVX, then treated daily for 52weeks with 125, 250, or 625mg strontium ranelate/kg. Bone strength, mass, micro-architecture, turnover, and intrinsic quality were assessed. Results: Strontium ranelate prevented ovariectomy-induced deterioration in mechanical properties with energy necessary for fracture completely maintained vs. SHAM at 625mg/kg/day, which corresponds to the clinical dose. This was related to a dose-dependent effect on bone volume, higher trabeculae number, and lower trabecular separation in strontium ranelate vs. OVX. Load and energy required to induce lamella deformation were higher with strontium ranelate than in OVX and in SHAM, indicating that the bone formed with strontium ranelate is able to withstand greater damage before fracture. Bone formation was maintained high or even increased in strontium ranelate as shown by mineralizing surfaces and alkaline phosphatase while strontium ranelate led to reductions in deoxypyridinoline. Conclusion: Strontium ranelate administered at 625mg/kg/day for 52weeks prevented OVX-induced biomechanical properties deterioration by influencing the determinants of bone strength: it prevented bone loss and micro-architecture degradation in association with an effect on intrinsic bone quality. These beneficial effects on bone contribute to explain strontium ranelate antifracture efficac

Interfacial Micro-currents in Continuum-Scale Multi-Component Lattice Boltzmann Equation Hydrodynamics.

We describe, analyse and reduce micro-current effects in one class of lattice Boltzmann equation simulation method describing im-miscible fluids within the continuum approximation, due to Lishchuk et al. (Phys. Rev. E 67 036701 (2003)). This model's micro-current flow �field and associated density adjustment, when considered in the linear, low-Reynolds number regime, may be decomposed into independent, superposable contributions arising from various error terms in its immersed boundary force. Error force contributions which are rotational (solenoidal) are mainly responsible for the micro-current (corresponding density adjustment). Rotationally anisotropic error terms arise from numerical derivatives and from the sampling of the interface-supporting force. They may be removed, either by eliminating the causal error force or by negating it. It is found to be straightforward to design more effective stencils with significantly improved performance. Practically, the micro-current activity arising in Lishchuk's method is reduced by approximately three quarters by using an appropriate stencil and approximately by an order of magnitude when the effects of sampling are removed

Parallax of PSR J1744-1134 and the Local Interstellar Medium

We present the annual trigonometric parallax of PSR J1744-1134 derived from an analysis of pulse times of arrival. The measured parallax, pi = 2.8+/-0.3 mas ranks among the most precisely determined distances to any pulsar. The parallax distance of 357+/-39 pc is over twice that derived from the dispersion measure using the Taylor & Cordes model for the Galactic electron distribution. The mean electron density in the path to the pulsar, n_e = (0.0088 +/- 0.0009) cm^{-3}, is the lowest for any disk pulsar. We have compared the n_e for PSR J1744-1134 with those for another 11 nearby pulsars with independent distance estimates. We conclude that there is a striking asymmetry in the distribution of electrons in the local interstellar medium. The electron column densities for pulsars in the third Galactic quadrant are found to be systematically higher than for those in the first. The former correlate with the position of the well known local HI cavity in quadrant three. The excess electrons within the cavity may be in the form of HII clouds marking a region of interaction between the local hot bubble and a nearby superbubble.Comment: revised version accepted for publication in ApJ Letters; reanalysis of uncertainty in parallax measure and changes to fig

Climate effects and stature since 1800

During the last 30 years, economic and social historians have collected and analysed large amounts of anthropometric data in order to explore key aspects of the human past. Attention has also been devoted to the examination of factors that can exert an influence on stature. This article outlines the different ways in which climate might influence stature, either directly or indirectly. It then uses Geographical Information System (GIS) software to explore the relationship between variations in temperature and precipitation and the average heights of men in France, India, Mexico, Spain and the United States (US) over the last two centuries. It is possible to observe an influence of climate on stature in some countries, especially during the nineteenth century, but the relationship weakens across time and largely disappears in recent decades. The attenuation of this relationship is attributed to a process of “technophysio evolution” as countries modernised and developed economically

Liquid marbles: principles and applications

The ability of particles to adhere to a fluid–fluid interface can stabilize the formation of an emulsion. When the encapsulated fluid is a liquid and the fluid in which it is immersed is air, the object formed is called a “Liquid Marble”. Here we discuss how liquid marbles can be created, their fundamental properties and their transport and potential uses. We show how they arise naturally as an insect waste disposal system, from impact of droplets on powders and on hydrophobic soil, and in the mixing of particulate containing liquids. Our principal aim is to review research on macroscopic single marbles and their potential uses in sensors and droplet microfluidics. However, we also illustrate the similarity between liquid marbles, Pickering emulsions and “Dry Water”, and the potential application of assemblies of liquid marbles within cosmetics and pharmaceutical formulations. Finally, we discuss how modifying the surface structure of particles and providing heterogeneous surface chemistry on particles (e.g. Janus particles) might provide new types of liquid marbles and applications

Capillary filling with wall corrugations] Capillary filling in microchannels with wall corrugations: A comparative study of the Concus-Finn criterion by continuum, kinetic and atomistic approaches

We study the impact of wall corrugations in microchannels on the process of capillary filling by means of three broadly used methods - Computational Fluid Dynamics (CFD), Lattice-Boltzmann Equations (LBE) and Molecular Dynamics (MD). The numerical results of these approaches are compared and tested against the Concus-Finn (CF) criterion, which predicts pinning of the contact line at rectangular ridges perpendicular to flow for contact angles theta > 45. While for theta = 30, theta = 40 (no flow) and theta = 60 (flow) all methods are found to produce data consistent with the CF criterion, at theta = 50 the numerical experiments provide different results. Whilst pinning of the liquid front is observed both in the LB and CFD simulations, MD simulations show that molecular fluctuations allow front propagation even above the critical value predicted by the deterministic CF criterion, thereby introducing a sensitivity to the obstacle heigth.Comment: 25 pages, 8 figures, Langmuir in pres

Multi-Particle Collision Dynamics -- a Particle-Based Mesoscale Simulation Approach to the Hydrodynamics of Complex Fluids

In this review, we describe and analyze a mesoscale simulation method for fluid flow, which was introduced by Malevanets and Kapral in 1999, and is now called multi-particle collision dynamics (MPC) or stochastic rotation dynamics (SRD). The method consists of alternating streaming and collision steps in an ensemble of point particles. The multi-particle collisions are performed by grouping particles in collision cells, and mass, momentum, and energy are locally conserved. This simulation technique captures both full hydrodynamic interactions and thermal fluctuations. The first part of the review begins with a description of several widely used MPC algorithms and then discusses important features of the original SRD algorithm and frequently used variations. Two complementary approaches for deriving the hydrodynamic equations and evaluating the transport coefficients are reviewed. It is then shown how MPC algorithms can be generalized to model non-ideal fluids, and binary mixtures with a consolute point. The importance of angular-momentum conservation for systems like phase-separated liquids with different viscosities is discussed. The second part of the review describes a number of recent applications of MPC algorithms to study colloid and polymer dynamics, the behavior of vesicles and cells in hydrodynamic flows, and the dynamics of viscoelastic fluids

Risk Governance of Emerging Technologies Demonstrated in Terms of its Applicability to Nanomaterials

Nanotechnologies have reached maturity and market penetration that require nano-specific changes in legislation and harmonization among legislation domains, such as the amendments to REACH for nanomaterials (NMs) which came into force in 2020. Thus, an assessment of the components and regulatory boundaries of NMs risk governance is timely, alongside related methods and tools, as part of the global efforts to optimise nanosafety and integrate it into product design processes, via Safe(r)-by-Design (SbD) concepts. This paper provides an overview of the state-of-the-art regarding risk governance of NMs and lays out the theoretical basis for the development and implementation of an effective, trustworthy and transparent risk governance framework for NMs. The proposed framework enables continuous integration of the evolving state of the science, leverages best practice from contiguous disciplines and facilitates responsive re-thinking of nanosafety governance to meet future needs. To achieve and operationalise such framework, a science-based Risk Governance Council (RGC) for NMs is being developed. The framework will provide a toolkit for independent NMs' risk governance and integrates needs and views of stakeholders. An extension of this framework to relevant advanced materials and emerging technologies is also envisaged, in view of future foundations of risk research in Europe and globally

E-Cadherin Is Required for Centrosome and Spindle Orientation in Drosophila Male Germline Stem Cells

Many adult stem cells reside in a special microenvironment known as the niche, where they receive essential signals that specify stem cell identity. Cell-cell adhesion mediated by cadherin and integrin plays a crucial role in maintaining stem cells within the niche. In Drosophila melanogaster, male germline stem cells (GSCs) are attached to niche component cells (i.e., the hub) via adherens junctions. The GSC centrosomes and spindle are oriented toward the hub-GSC junction, where E-cadherin-based adherens junctions are highly concentrated. For this reason, adherens junctions are thought to provide a polarity cue for GSCs to enable proper orientation of centrosomes and spindles, a critical step toward asymmetric stem cell division. However, understanding the role of E-cadherin in GSC polarity has been challenging, since GSCs carrying E-cadherin mutations are not maintained in the niche. Here, we tested whether E-cadherin is required for GSC polarity by expressing a dominant-negative form of E-cadherin. We found that E-cadherin is indeed required for polarizing GSCs toward the hub cells, an effect that may be mediated by Apc2. We also demonstrated that E-cadherin is required for the GSC centrosome orientation checkpoint, which prevents mitosis when centrosomes are not correctly oriented. We propose that E-cadherin orchestrates multiple aspects of stem cell behavior, including polarization of stem cells toward the stem cell-niche interface and adhesion of stem cells to the niche supporting cells